Correlation between Corrosion Potential and Pitting Potential for AISI 304L Austenitic Stainless Steel in 3.5% NaCl Aqueous Solution
AUTOR(ES)
Alonso-Falleiros, Neusa, Wolynec, Stephan
FONTE
Materials Research
DATA DE PUBLICAÇÃO
2002-03
RESUMO
We investigated the effect of surface finish of two AISI 304L (UNS S30403) stainless steels on the corrosion potential (Ecorr) in 3.5% NaCl aqueous solution and its value was compared with the pitting potential (Ep) value and the type of anodic potentiodynamic curve obtained for determination of Ep in this solution. Five different surface finishes were examined. Ecorr and its standard deviation are strongly affected by the type of surface finish. Moreover, there are evidences of a linear correlation between Ecorr and Ep, as well as between the percentage of anodic curves with a well-defined pitting potential and the uncertainty in the determination of Ecorr.
Documentos Relacionados
- Corrosion Resistance of TiO2-ZrO2 Nanocomposite Thin Films Spin Coated on AISI 304 Stainless Steel in 3.5 wt. % NaCl Solution
- The inhibition effect of mad Honey on corrosion of 2007-type aluminium alloy in 3.5% NaCl solution
- Use of Electrochemical Tests for Assessment of the Effect of Erosive Particle Size on the Erosion-Corrosion Behaviour of AISI 304L Austenitic Stainless Steel
- The effect of weld geometry and post-weld heat treatment on the corrosion behaviour of austenitic stainless steel immersed in 1.0 M NaCl solution
- Corrosion behaviour of iron and AISI 304 stainless steel in tungstate aqueous solutions containing chloride