Arc Based
Mostrando 1-12 de 145 artigos, teses e dissertações.
-
1. Two new species of the industrially relevant genus Absidia (Mucorales) from soil of the Brazilian Atlantic Forest
ABSTRACT During a survey of Mucorales in soil from an upland forest area in Pernambuco, Brazil, two specimens were isolated and characterized based on their morphological, physiological, and molecular data (ITS and LSU rDNA). Phylogenetic analyses of the isolates revealed that the strains URM 8209 and URM 8210 are closely related to species of Absidia. URM 8
Acta Bot. Bras.. Publicado em: 2020-09
-
2. The automatic selection of hydraulic spray nozzles based on the psychrometric air conditions in hydropneumatic sprayers
ABSTRACT The aim of the current study is to develop an electronic system capable of automatically replacing hydraulic spray nozzles, based on psychrometric air conditions such as temperature and relative air humidity, in order to help improving the efficiency of application technologies. The system comprised one microcontroller, two solenoid valves, one temp
Rev. Ceres. Publicado em: 2020-02
-
3. Effect of Plasma Arc Welding on Residual Stress and Distortion of Thin Titanium Sheet
In this research work, a finite element model is developed to predict the temperature field and residual stress during plasma arc welding of thin Ti-6Al-4V sheets. Dhinakaran’s heat source model which is based on Parabolic Gaussian distribution is used to predict the temperature field and Anand’s model is used to predict the residual stress. Numerical si
Mat. Res.. Publicado em: 20/01/2020
-
4. Efeito da Adição de Propileno aos Gases de Proteção Convencionais na Soldagem GMAW Aplicada a Juntas de Topo e Ângulo
Resumo O presente trabalho teve por objetivo avaliar a adição de 1,3% de C3H6 ao CO2 puro e 0,6% de C3H6 à mistura de Ar+25%CO2, na soldagem de aço carbono utilizando o processo Gas Metal Arc Welding (GMAW) aplicado em juntas de topo com chanfro em V e ângulo em T. As soldas foram realizadas utilizando chapas de aço SAE 1020, arame de solda ER70S-6 de
Soldag. insp.. Publicado em: 02/12/2019
-
5. O uso de metodologia ativa no campo das Ciências Sociais em Saúde: relato de experiência de produção audiovisual por estudantes
Resumo Relata-se a experiência de elaboração de produções audiovisuais (PAV) no formato documentário por estudantes do curso de Odontologia da Universidade Federal Fluminense (UFF) na abordagem de conteúdo voltado às Ciências Sociais em Saúde. Adotou-se a metodologia da problematização (método do Arco de Maguerez) para abordagem dos temas. Foram
Interface (Botucatu). Publicado em: 24/10/2019
-
6. Atomization Characteristics of Droplet and Morphologies of Arc Sprayed Ni-Al Particles and Composition Coatings
Droplet atomization characteristics and its morphology in twin-wire arc sprayed (TWAS) Ni-Al were explored in depth. Both numerical model and theoretical method were built for calculating the process of the droplet deformation and breakup in air flow, which based on the standard k-ε model and the volume of fluid (VOF) dual-phase flow model. The atomization
Mat. Res.. Publicado em: 23/09/2019
-
7. Influência da composição do gás de proteção nas tensões residuais de juntas de aço DP600 soldadas pelo processo GMAW
RESUMO A indústria automobilística vem investindo em novos processos de fabricação que melhoram a produtividade sem perda da qualidade. Entretanto, a presença de tensões residuais, geradas em todos os processos de fabricação, constitui um dos grandes problemas encontrados na indústria metal mecânica, pois estas podem se somar às tensões de carreg
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Comparison of Aluminum Based Alloys Reinforced with Intermetallic Developed by Powder Metallurgy and Arc Melting Routes
Abstract In this work, Al-Ti alloys were prepared using metallic powders of Al and Ti via Powder Metallurgy (PM) and Arc Melting (AM) route. Four chemical compositions including pure aluminum were studied. Metallic powders were mixed with three compositions, Al-5Ti, Al-10Ti and Al-10Ti-2SiC. All the compositions were in atomic percentage. In case of PM, samp
Soldag. insp.. Publicado em: 29/08/2019
-
9. Mine fleet cost evaluation - Dijkstra's optimized path
Abstract The transport distance in a mining operation strongly influences a mine operation revenue and its operational cycle because it is a fundamental part of the total mining costs. Generally, the transport route is determined based on an engineer's practical knowledge, which does not consider any mechanism to optimize the possible routes to be taken. In
REM, Int. Eng. J.. Publicado em: 2019-06
-
10. Performance of the INCONEL 625 alloy weld overlay obtained by FCAW process
ABSTRACT Nickel-based weld overlays (cladding) are commonly used in oil & gas industry to extend the life of equipment under corrosive environment, as it improves the corrosion resistance without a significant increase in the manufacturing cost, when compared to a full nickel-based alloy equipment. Although there are extensive literature involving overlays a
Matéria (Rio J.). Publicado em: 20/05/2019
-
11. Influência da composição do gás de proteção nas tensões residuais de juntas de aço DP600 soldadas pelo processo GMAW
RESUMO A indústria automobilística vem investindo em novos processos de fabricação que melhoram a produtividade sem perda da qualidade. Entretanto, a presença de tensões residuais, geradas em todos os processos de fabricação, constitui um dos grandes problemas encontrados na indústria metal mecânica, pois estas podem se somar às tensões de carreg
Matéria (Rio J.). Publicado em: 20/05/2019
-
12. Additive Techniques to Refurbish Ni Based Components
Abstract The attractiveness of additive techniques to refurbish worn components requires the availability of data from different process. This study correlates two additive techniques, Plasma Transferred Arc (PTA – AM) and Direct Laser Deposition (DLD), using IN 625 wire. Specific features of each technique are discussed regarding their potential use to re
Soldag. insp.. Publicado em: 09/05/2019