Aqueous Dispersions
Mostrando 13-24 de 62 artigos, teses e dissertações.
-
13. Síntesis y caracterización de adhesivos reposicionables de poliuretano dispersos en agua, obtenidos a partir de aceite de castor maleinizado
This work focused on the production of aqueous dispersions of polyurethane using the emulsification method by phase inversion. For the synthesis two polyols were employed, viz. a commercial polyester and Maleinizated Castor Oil (MACO), with two diisocyanates: one aromatic, toluene diisocyanate (TDI) and another aliphatic, hexamethylene diisocyanate (HDI), wh
Polímeros. Publicado em: 11/06/2010
-
14. Caracterização por espalhamento de luz de dispersões aquosas de agregados lipídicos aniônicos / Structural characterization of aqueous dispersions of the anionic phospholipid DMPG by light scattering
Neste trabalho caracterizamos dispersões aquosas de vesículas lipídicas por espalhamento de luz. Utilizamos os diferentes métodos da técnica: espalhamento de luz estático (SLS) e espalhamento de luz dinâmico (DLS) no estudo desses sistemas. No SLS a intensidade da luz espalhada foi coletada em vários ângulos de espalhamento para diferentes concentra
Publicado em: 2010
-
15. Estudo da incorporação de diferentes tipos de argilas hidrofílicas em dispersões aquosas de poliuretanos para formação de nanocompósitos / Study of incorporation of different hydrophilic clays in nanocomposites of water born polyurethanes
Neste trabalho foram sintetizados nanocompósitos à base de poliuretanos em dispersão aquosa (NWPUs) e argilas hidrofílicas do tipo montimorilonita (MMT) de natureza sódica e cálcica. Os monômeros empregados na síntese foram: poli(glicol propilênico) (PPG); copolímero em bloco à base de poli(glicol etilênico) e poli(glicol propilênico) (EG-b-PG),
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/07/2009
-
16. Repulsive and attractive ferroglasses: a SAXS and XPCS study
A dynamical freezing, which is the analogous of a glass transition, is observed at large concentrations in aqueous dispersions of maghemite nanoparticles. We study experimentally the structure and the dynamical properties of two dense ferroglass-formers in two very distinct states of interparticle interaction, either strongly repulsive or attractive. The sta
Brazilian Journal of Physics. Publicado em: 2009-04
-
17. Preparation of thin films using freeze drier alumina
Synthesis of polymorphous of nanoparticulate alumina has been the subject of many works. The stabilization of these nanoparticles in aqueous suspensions is necessary in many technologic application and industrial products. Recently, a number of routes have been developed using various dispersants to prepare these nanoparticles dispersed in aqueous solution.
Brazilian Journal of Physics. Publicado em: 2009-04
-
18. Effect of solvents on the morphological characterization of enteric nanoparticles
Size and external and internal morphologies of nanoparticles and microparticles are very important on the design of drug devices for controlled release. Random enteric copolymers such as poly (methacrylic acid-co-ethyl acrylate) and poly (methacrylic acid-co-methyl methacrylate) were used to produce nanoparticles, which contain a model drug and could be empl
Materials Research. Publicado em: 2009
-
19. Dispersiones acuosas de poliuretano bloqueado: una alternativa como agente curtiente
Two types of crosslinking agents blocked polyurethanes were synthesized and evaluated as tanning agents of bovine skins. The results of the synthesis of aqueous dispersions of blocked polyurethane (DPU’s) are presented. They were based on prepolymers from the reaction of the aliphatic diisocyanates H12MDI 4,4’-methylenebis(cyclohexyl isocyanate) and HDI
Polímeros. Publicado em: 2008-06
-
20. Síntese e caracterização de dispersões aquosas de poliuretanos à base de copolímeros em bloco de poli(glicol etilênico) e poli(glicol propilênico)
Non-polluting polyurethane aqueous dispersions, with 40% of solids content, were synthesized based on block copolymers of poly(ethylene glycol) and poly(propylene glycol) (PEG-b-PPG), with PEG hydrophilic segments content of 7 and 25%, poly(propylene glycol) (PPG), dimethylolpropionic acid (DMPA), isophorone diisocyanate (IPDI), and hydrazine. Different form
Química Nova. Publicado em: 2008
-
21. Caracterização estrutural de agregados formados pelo antifúngico anfotericina B e lipídios catiônicos: uma possível formulação farmacológica / Structural characterization of aggregates formed by the antifungal drug amphotericin B and cationic lipids: a possible pharmacological formulation
Amphotericin B (AB) is a natural antibiotic, produced by Streptomyces nodosus, with a very potent antifungal activity. It is a polyene macrolide molecule, isolated in 1953. Since then, it has been extensively used in the treatment of systemic mycotic infections. Considering AB very low solubility in aqueous medium, it has been largely used as an aqueous disp
Publicado em: 2008
-
22. Caracterização óptica de dispersões aquosas de nanotubos de carbono
It has been demonstrated that the electronic and optical properties of single-wall carbon nanotubes (SWNT) are strongly affected by the environment. This strong environmental effect is very relevant in analyzing the composition of carbon nanotube samples using optical techniques, especially in the case of separation experiments, where the SWNT environments a
Publicado em: 2008
-
23. Development of nanoemulsions containing passion fruit seed oil (Passiflora edulis) and lavender essential oil (Lavandula officinalis) and evaluation of its topical anti-inflammatory activity. / Desenvolvimento de nanoemulsões à base de óleo de maracujá (Passiflora edulis) e óleo essencial de lavanda (Lavandula officinalis) e avaliação da atividade antiinflamatória tópica
Nanotechnology is a phenomenon that applies to mainly all sectors of science and in the cosmetics area the high investment in this field has strengthened the idea that nanotechnology products offer real advantages to consumers. The growing demand of consumers and the advances in knowledge about production and stability of dispersed systems enable the develop
Publicado em: 2008
-
24. Estudo do efeito da adição de poli(glicol etilênico-b-glicol propilênico) na formação de dispersões aquosas poliuretânicas à base de poli(glicol propilênico) / Study of the effect of the copolymer poly(ethylene glycol-co-propylene glycol) addition on the polyurethane based poly(propylene glycol) aqueous dispersions formation
Non-polluting and poly(urethane-urea) aqueous dispersions based on poly(propylene glycol) (PPG) and block copolymers of poly(ethylene glycol-b-propylene glycol) (EG-b-PG) containing 7% of ethylene glycol repeating units, were produced in an innovative way. The poly(urethane-urea)s were prepared, in two steps, by the prepolymer method. In the first step, anio
Publicado em: 2007