Amorphous Alloys
Mostrando 1-12 de 54 artigos, teses e dissertações.
-
1. Microstructure and Fracture of 50Mo-50Re Vacuum Brazed with Fe-Si-B Filler Metal
Microstructural evolution, interfacial reaction and fracture during vacuum brazing of 50Mo-50Re alloys using amorphous alloy Fe-5.6Si-2.6B(wt%) were investigated. A binary intermetallic compound, σ(Mo2Re3) formed as parallel contiguous layers in the diffusion zone. In addition, Fe from the braze alloy, in combination with dissolved Mo from the substrate, fo
Mat. Res.. Publicado em: 30/09/2019
-
2. Efeito da Taxa de Resfriamento na Liga Ni80Cu20 via Dinâmica Molecular
RESUMO A simulação em Dinâmica Molecular (MD) é uma poderosa ferramenta para estudo de ligas amorfas nanométricas. Neste artigo, a MD foi empregada para o estudo da liga Ni80Cu20. As simulações foram realizadas com o código livre LAMMPS, em um sistema contendo 2.000 átomos com interação atômica dada pelo potencial de Finnis-Sinclair (EAM-FS). O a
Matéria (Rio J.). Publicado em: 20/05/2019
-
3. Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites
This work highlights the relationship between the preparation, crystallization behavior, microstructures, and mechanical properties of Cu-based bulk metallic glasses (BMGs) and their composites (BMGCs). (Cu47Zr45Al8)97.5Y1.5Nb in-situ BMGCs were prepared using isothermal annealing, and the experimental results indicate tunable mechanical properties of the al
Mat. Res.. Publicado em: 06/05/2019
-
4. Influence of Small Content Elements Additions on the Glass Forming Ability of Zr-based Bulk Metallic Glasses Alloys
The present work reports investigation on the Glass Forming Ability (GFA) of Zr-based Bulk Metallic Glasses (BMG’s) by microalloying with early transition metals. GFA was measured as the amorphous fraction formed in samples with different diameters using optical microscopy (OM) and image analysis techniques. Samples with the highest GFA had their oxygen co
Mat. Res.. Publicado em: 06/09/2018
-
5. Surface, microstructural, and adhesion strength investigations of a bioactive hydroxyapatite-titanium oxide ceramic coating applied to Ti-6Al-4V alloys by plasma thermal spraying
Ti-6Al-4V alloy is employed in implants because of its good mechanical strength, excellent biocompatibility, and good resistance to corrosion in biological environments. Herein, a composite (HAp-TiO2, 50% by volume of both components) coating surface employing Ti-6Al-4V was characterized. Samples were analyzed post fabrication and post heat treatment to anal
Mat. Res.. Publicado em: 28/05/2018
-
6. Thermal Spraying Processes and Amorphous Alloys: Macro-Indicators of Patent Activity
Thermal spraying processes allows high cooling rates and can favor the formation of amorphous microstructures. Amorphous metallic coatings can result in superior mechanical and functional properties. To follow new technological development and innovation paths, indicators based on patent data can be assembled to support technological forecasting assessments
Mat. Res.. Publicado em: 04/12/2017
-
7. Assessing Collaboration and Knowledge Flow on Coatings of Metallic Glasses Obtained From Thermal Spraying Processes Using Bibliometrics and Science Mapping
Coatings of amorphous metallic alloys can be obtained using different thermal spraying processes, such as HVOF, plasma spraying, cold spraying and others. Although many studies focused on investigating scientific issues concerning apply amorphous metallic coatings using thermal spraying, less attention have been paid to evaluate how research institutes and c
Mat. Res.. Publicado em: 13/11/2017
-
8. The Development of Structure Model in Metallic Glasses
Metallic glasses (amorphous alloys) have grown from a singular observation to an expansive class of alloys with a broad range of scientific interests. Their unique properties require a robust understanding on the structures at the atomic level while alloys in this class have a similar outlook on the microstructure. In this review, we went through the history
Mat. Res.. Publicado em: 06/02/2017
-
9. The Effect of Cr Content on the Glass Forming Ability of Fe68-xCrxNb8B24 (x =8,10,12) Alloys
Based on the Fe60Cr8Nb8B24 alloy, reported in the literature as good Glass Forming Ability (GFA), in this study the GFA of two new compositions was proposed, Fe68-xCrxNb8B24 (x=10,12). They were evaluated as good candidates to be new compositions of Bulk Metallic Glasses (BMG) with better corrosion resistance due to the high Cr content. Rapidly solidified gl
Mat. Res.. Publicado em: 27/10/2016
-
10. Effect of Alloying Elements in Melt Spun Mg-alloys for Hydrogen Storage
Abstract In this paper we report the effect of alloying elements on hydrogen storage properties of melt-spun Mg-based alloys. The base alloys Mg90Si10, Mg90Cu10, Mg65Cu35 (at%) were studied. We also investigated the effect of rare earths (using MM: mischmetal) and Al in Mg65Cu25Al10, Mg65Cu25MM10 and Mg65Cu10Al15MM10 alloys. All the melt-spun alloys without
Mat. Res.. Publicado em: 28/07/2016
-
11. Effect of Al addition to Rapidly Solidified Mg-Cu-Rare Earth Alloys
Rapidly solidified Mg based alloys are of interest for industrial applications as a structural material and for hydrogen storage. Mg-Cu-Rare Earth alloys have shown high glass forming ability; full amorphous structure with thickness of mm size can be obtained within these systems. However, their brittle behavior limits their industrial applications. In the p
Mat. Res.. Publicado em: 03/06/2016
-
12. Development and Applications of Highly Functional Al-based Materials by Use of Metastable Phases
This paper reviews the features of alloy components, structure and mechanical properties, physical and chemical properties of metastable Al-based alloys developed by use of various liquid or vapor quenching-induced phases such as amorphous, quasicrystalline, nanocrystalline, nanocomposite, supersaturated solid solution and structure gradient phases. As advan
Mat. Res.. Publicado em: 04/12/2015