Aluminum Reduction
Mostrando 13-24 de 143 artigos, teses e dissertações.
-
13. Efeito da mesogeometria da broca e das condições de lubrirrefrigeração sobre o acabamento do furo em aço ARBL DIN S700MC
RESUMO O trabalho apresenta um estudo sobre os efeitos decorrentes da modificação da mesogeometria de uma broca helicoidal de metal-duro com revestimento de TiAlN sobre o acabamento superficial do aço de alta resistência e baixa liga DIN S700MC utilizando diferentes condições de aplicação de fluidos lubrirrefrigerantes (em abundância, em mínima qua
Matéria (Rio J.). Publicado em: 20/05/2019
-
14. Rheological properties of low-density polyethylene filled with hydrophobic Co(Ni)-Al layered double hydroxides
Abstract Cobalt/aluminum and nickel/aluminum layered double hydroxide (LDH - M+2:Al molar ratio of 3:1) were intercalated with dodecylsulphate (DDS), laurate (LAU), stearate (STE) and palmitate (PAL) and used as filler in low-density polyethylene (LDPE) in percentages between 0.2 and 7.0wt%. After injection molding, the samples were submitted to morphologic
Polímeros. Publicado em: 01/04/2019
-
15. Temporal evaluation of soil chemical attributes after slash-and-burn agriculture in the Western Brazilian Amazon
ABSTRACT. In Amazonia, the main causes of deforestation are systems based on slash-and-burn agriculture. The objective of this work was to evaluate temporal changes in the soil chemical attributes after the vegetation has been slashed and burned in an area of native forest in the Western Amazon. For this study, four hectares of forest in Cruzeiro do Sul, Sta
Acta Sci., Agron.. Publicado em: 28/03/2019
-
16. Influence of Diffusion Parameters on Electrical Characteristics of mc-Si Solar Cells with Aluminum and Phosphorus Diffusion Performed in the Same Thermal Step
The diffusion of phosphorus and aluminum in a single-step thermal process may reduce the production cost of multicrystalline silicon (mc-Si) solar cells. The goal of this paper is to analyze the influence of phosphorus diffusion parameters on the electrical characteristics of p-type mc-Si solar cells processed with a single-step diffusion of phosphorus and a
Mat. Res.. Publicado em: 10/01/2019
-
17. Soil Water Retention Curve as Affected by Sample Height
ABSTRACT: The soil water retention curve is one of the main instruments to assess the soil physical quality and to improve soil management. Traditionally, the equipment most used in the laboratory to determine the retention curve has been Haines funnels and Richards chambers. An important factor to which little attention has been given in the use of these eq
Rev. Bras. Ciênc. Solo. Publicado em: 14/11/2018
-
18. Experimental and numerical investigation on the shock characteristics of U-notched ZL205A specimens under dynamic mixed-mode loading
Abstract Shock environment assessment and improvement during stage separation is an important issue of concern in aerospace engineering. This paper focuses on shock response caused by dynamic fracture of aluminum alloy separation plate, which usually undergoes mixed mode loading during separation. Based on Split Hopkinson Tensile Bar (SHTB) apparatus, five g
Lat. Am. j. solids struct.. Publicado em: 01/11/2018
-
19. Protection of Grid Connected Photovoltaic Systems (GCPVS)
ABSTRACT Installations of photovoltaic systems connected or not to the electrical network have become increasingly popular, but it is often carried out by unqualified people using low quality components. The present study aims to describe the methodology adopted for the protection of grid connected photovoltaic systems (GCPVS) and the implications caused by
Braz. arch. biol. technol.. Publicado em: 29/10/2018
-
20. Flavonoids, phenolic content, and antioxidant activity of propolis from various areas of Guanajuato, Mexico
Abstract Propolis is a resin gathered by honey bees from trees and shrubs but it used in the beehive as building material or as an antibiotic paste. The aim of this study was to determine the content of flavonoids and phenols, as well as the antioxidant capacity of propolis from various regions of Guanajuato, Mexico. The content of flavonoids and phenols wa
Food Sci. Technol. Publicado em: 16/04/2018
-
21. The Structural and the Magnetic Properties of Aluminum Substituted Yttrium Iron Garnet
In this paper, Y3AlxFe5-xO12 powders with x = 0.0, 0.2, 0.4, 0.6, 0.8, and 1.0 were prepared via solid state reaction method. X-ray diffraction, Vibrating Sample Magnetometry, and Mössbauer Spectroscopy were used to study their structural and magnetic properties. The XRD patterns of the samples show single phase structure with decreasing lattice constant wh
Mat. Res.. Publicado em: 15/03/2018
-
22. Improvement of power efficiency of hybrid white OLEDs based on p-i-n structures
ABSTRACT In this article, hybrid white organic light-emitting diodes (WOLEDs) under p-i-n structures have been investigated in terms of power efficiency. By using tris(8-hydroxy quinolinato) aluminum (Alq3) doped with 8-hydroxy-quinolinato lithium (Liq) as an n-type and WHI112 doped with molybdenum trioxide (MoO3) as a p-type, the typical device structure of
Matéria (Rio J.). Publicado em: 05/03/2018
-
23. Comparative analysis of niobium and vanadium carbide efficiency in the high energy mechanical milling of aluminum bronze alloy
Abstract This study aims to analyze the efficiency of niobium and vanadium carbides in the high energy mechanical milling of aluminum bronze alloy. Two series of experiments were made following the same steps for both niobium carbide (NbC) and vanadium carbide (VC) additions: 30 g of chips were weighed and placed in a stainless steel jar with 3 % of carbide
REM, Int. Eng. J.. Publicado em: 2018-03
-
24. VALIDAÇÃO DO PROCESSO DE ELETROCOAGULAÇÃO E AVALIAÇÃO DA ELETRODISSOLUÇÃO DE ELETRODOS NO TRATAMENTO DE EFLUENTES DE ABATEDOUROS DE AVES
The electrocoagulation have been considered a promising technology for wastewater food treatment. This paper evaluates the application of electrocoagulation for the treatment of poultry slaughterhouse wastewater using two types of electrode, iron and aluminum. The initial pH, the electrolysis time and the electrical current density were used as the operating
Quím. Nova. Publicado em: 2017-05