Aluminum Carbide
Mostrando 1-12 de 18 artigos, teses e dissertações.
-
1. Silicon carbide hollow fiber membranes developed for the textile industry wastewater treatment
Abstract In order to reduce the impacts of the industrial effluent on the environment, silicon carbide hollow fiber membranes were prepared by the precipitation-immersion technique and sintered at 1450 and 1500 °C. The membranes were characterized by X-ray diffraction, their surface structure was characterized by scanning electron microscopy and atomic forc
Cerâmica. Publicado em: 2021-06
-
2. Efeito da mesogeometria da broca e das condições de lubrirrefrigeração sobre o acabamento do furo em aço ARBL DIN S700MC
RESUMO O trabalho apresenta um estudo sobre os efeitos decorrentes da modificação da mesogeometria de uma broca helicoidal de metal-duro com revestimento de TiAlN sobre o acabamento superficial do aço de alta resistência e baixa liga DIN S700MC utilizando diferentes condições de aplicação de fluidos lubrirrefrigerantes (em abundância, em mínima qua
Matéria (Rio J.). Publicado em: 20/05/2019
-
3. Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments
Abstract: The effects of several ceramic surface treatments on bond strength of a polymer-infiltrated ceramic network and resin composite as repair material were evaluated. CAD-CAM blocks of a polymer-infiltrated ceramic network (Vita Enamic) were sliced and subjected to aging process, followed by embedding in acrylic resin. The bonding/repair area was treat
Braz. oral res.. Publicado em: 05/04/2018
-
4. Comparative analysis of niobium and vanadium carbide efficiency in the high energy mechanical milling of aluminum bronze alloy
Abstract This study aims to analyze the efficiency of niobium and vanadium carbides in the high energy mechanical milling of aluminum bronze alloy. Two series of experiments were made following the same steps for both niobium carbide (NbC) and vanadium carbide (VC) additions: 30 g of chips were weighed and placed in a stainless steel jar with 3 % of carbide
REM, Int. Eng. J.. Publicado em: 2018-03
-
5. Effect of High Energy Milling Time of the Aluminum Bronze Alloy Obtained by Powder Metallurgy with Niobium Carbide Addition
The aluminum bronze alloy is part of a class of highly reliable materials due to high mechanical strength and corrosion resistence being used in the aerospace and shipbuilding industry. It's machined to produce parts and after its use cycle, it's discarded, but third process is considered expensive and besides not being correct for environment reasons. Thus,
Mat. Res.. Publicado em: 10/04/2017
-
6. Mechanical and Corrosion Behavior of Al7075 (Hybrid) Metal Matrix Composites by Two Step Stir Casting Process
Abstract This paper investigates the mechanical properties and corrosion behavior of Metal Matrix Composites prepared using Al7075 alloy as a matrix, Silicon Carbide and Titanium Carbide as reinforcement particles. Two step stir casting process was used to fabricate the composites by varying volume fractions of Silicon Carbide and Titanium Carbide (0 to 15 v
Lat. Am. j. solids struct.. Publicado em: 2017-02
-
7. Obtenção de Compósito de matriz AA2024 com dispersão de Al4C3 por moagem de alta energia / In situ Al4C3 reinforced AA2024 based composite produced by high energy milling
O desenvolvimento de materiais compósitos de matriz de alumínio é amplamente estudado. A motivação destes estudos são os requisitos de uso de materiais que apresentem propriedades superiores às ligas usuais, com destaque para resistência mecânica com manutenção de resistência ao desgaste e corrosão, com beneficio da característica leveza deste
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/11/2011
-
8. Caracterização de material composto de matriz metálica a partir de um liga de alumínio aeronáutico / Characterization of metal matrix composite material from an aeronautical aluminum recycled alloy
Materiais compostos de matriz metálica (CMM) vêm sendo estudados para diversas aplicações. Entretanto, pouco estudo é apresentado na sua confecção a partir de materiais reciclados. Este trabalho teve como objetivo a caracterização de um material composto de matriz metálica (CMM), utilizando material reciclado como matéria prima. Foram usados apara
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/10/2011
-
9. Efeito do tamanho do abrasivo no desgaste de metais. / The effect of abrasive size on the wear resistance of metallic materials.
In this research, the effect of abrasive size on the wear resistance of five metallic materials was investigated. Abrasive wear tests using a pin test on alumina paper were carried out using abrasive sizes between 16 µm and 192 µm. The wear surface of the specimens was examined by scanning electron microscopy for identifying the wear micromechanism and the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/06/2010
-
10. Estudo da eletrodeposição de Ni e Ni+SiC para liga de Al AA 6061 / Study of the electrodeposition of Ni and Ni + SiC for Al alloy AA 6061
Ligas de alumínio são atualmente muito utilizadas, devido as propriedades que proporcionam, como por exemplo, a redução de peso mantendo resistência e durabilidade em sistemas mecânicos. A corrosão do Al pode ocorrer em forma de pites (pontos alveolares superficiais) e na seqüência ocorre uma oxidação intergranular da matriz metálica, o que compr
Publicado em: 2010
-
11. Internal turning for cylinder liners made of centrifuged gray cast iron / Torneamento interno de cilindros automotivos de ferro fundido cinzento centrifugado
This investigation describes and shows an unprecedented machining process to be used for manufacturing cylinder liners, which are very important parts used in aluminum engine blocks for automobiles. There are few known companies that manufacture this kind of component, and until now, all of them use a boring process to machine the internal diameter of the cy
Publicado em: 2009
-
12. Micro-morphological changes prior to adhesive bonding: high-alumina and glassy-matrix ceramics
The aim of this study was to qualitatively demonstrate surface micro-morphological changes after the employment of different surface conditioning methods on high-alumina and glassy-matrix dental ceramics. Three disc-shaped high-alumina specimens (In-Ceram Alumina, INC) and 4 glassy-matrix ceramic specimens (Vitadur Alpha, V) (diameter: 5 mm and height: 5 mm)
Brazilian Oral Research. Publicado em: 2008-06