Alumina Production
Mostrando 1-12 de 81 artigos, teses e dissertações.
-
1. Use of glass waste in the production of metakaolin-based geopolymer submitted to room temperature and thermal curing
Resumo O metacaulim é a principal matéria-prima utilizada na síntese de geopolímeros, embora a relação entre os teores de sílica e alumina não seja a ideal. Normalmente, o teor de SiO 2 é ajustado com o uso de silicatos presentes na solução ativadora. Uma opção ecoeficiente seria o uso de resíduos de vidro como fonte adicional de sílica. Este
Ambiente Construído. Publicado em: 2022
-
2. Evaluation of the combined addition of aluminum lactate and calcium carbonate to alumina-based castables
Abstract Calcium aluminate cement (CAC) can induce the development of high green mechanical strength to refractory castables in a short period of time (24 h). However, the production of this hydraulic binder is energy-intensive and releases a large content of carbon dioxide (CO2), which adds to global warming. Thus, aiming to develop an alternative binding s
Cerâmica. Publicado em: 2021-06
-
3. Thermal and Catalytic Fast Pyrolysis of Oily Extracts of Microalgae: Production of Biokerosene
Three different microalgae species, Desmodesmus sp., Nannochloropsis oculata and Halamphora coffeaeformis were grown under controlled conditions. The resulting dry biomass was characterized by TG-DTA (thermogravimetry-differential thermal analysis) and extracted with three solvents having different polarities. The extracts gross mass yields varied from 2% us
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
4. Expeditious Syntheses to Pharmochemicals 1,3-Dihydroxyacetone, 1,3-Dichloro-, 1,3-Dibromo- and 1,3-Diiodoacetone from Glycerol 1,3-Dichlorohydrin Using Homogenous and Heterogenous Medium
New efficient and reproductive routes to production of 1,3-dihydroxyacetone (1), 1,3-dichloroacetone (6), 1,3-dibromoacetone (7) and 1,3-diiodoacetone (8) from glycerol 1,3-dichlorohydrin (3) were developed. The synthesis of 1 was processed in three steps from glycerol 2 (1,3-selective chlorination of 2 to 3, oxidation of 3 to 6 and subsequent di-hydroxylati
J. Braz. Chem. Soc.. Publicado em: 2020-08
-
5. Preparation of low-cost ceramic membranes for microfiltration using sugarcane bagasse ash as a pore-forming agent
Resumo Membranas cerâmicas são de grande interesse industrial em processos de separação. Elas são caracterizadas por elevada estabilidade química/térmica e capacidade de filtração em temperaturas acima de 500 °C em uma larga faixa de valores de pH. Entretanto, a grande desvantagem das membranas cerâmicas é o elevado custo de produção envolvendo
Cerâmica. Publicado em: 14/11/2019
-
6. Reuse of iron ore tailings in the production of geopolymer mortars
Abstract A great variety of silica and alumina-rich materials have been investigated in the production of alkaline activated binders (or geopolymers) with low environment impact, e.g. low CO2 emissions. Geopolymer mortars and concretes may be more environmentally friendly if not only Portland cement but also natural aggregates (sand, gravel) are replaced wit
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
7. Synthesis and characterization of alumina fibers using solution blow spinning
Resumo Esse trabalho mostra a produção de nanofibras de alumina após tratamento térmico de fibras híbridas preparadas por fiação por sopro em solução. Essas nanofibras foram convertidas em γ-Al2O3 e α-Al2O3 após tratamento térmico ao ar entre 500 e 1200 °C. Os padrões de difração de raios X apresentaram todas as características das fases al
Cerâmica. Publicado em: 06/06/2019
-
8. Production and Characterization of a Silica-Alumina Membrane Using Novel Tubular Freeze-Cast Substrates
Development of new ceramic membranes has recently grown due to its superior thermal and mechanical stability. An interesting approach to manufacture asymmetric membranes is the production of aligned pore structure by the freeze-casting method. The lack of studies involving membrane production with tubular freeze-cast substrates warrants more research. In thi
Mat. Res.. Publicado em: 11/02/2019
-
9. Brazilian refractory grade bauxite: a new alternative to refractories makers and users
Abstract After two centuries of the discovery, we now know that there are several types of bauxites, in which mineralogy points to the most appropriate application. In the non-metallurgical industry, bauxites with refractory grades have been applied as raw materials in the production of high-alumina refractories for both shaped and unshaped. The increase in
Cerâmica. Publicado em: 2019-01
-
10. Study of the microstructure and mechanical properties of beta tricalcium phosphate-based composites with alumina addition produced by powder metallurgy
Abstract The use of alumina as a reinforcement in metallic and ceramic matrix is well-known. The purpose of this study was to investigate the effect of alumina addition according to its amount on the microstructural and mechanical behavior of tricalcium phosphate ceramic (TCP), more specifically the β-TCP. Although β-TCP has excellent bioactive and biocomp
REM, Int. Eng. J.. Publicado em: 2017-12
-
11. Application of Friction Surfacing to the Production of Aluminum Coatings Reinforced with Al2O3 Particles
The aim of this work was to produce deposits of AA6351-T6, reinforced with alumina (Al2O3) particles, over a substrate of AA5052-H32 through friction surfacing. AA6351-T6 consumable rods were drilled with one and two holes, which were filled with Al2O3 particles posteriorly. To perform the deposition, a conventional KONE KFE-3/BR milling machine was used. Th
Mat. Res.. Publicado em: 13/11/2017
-
12. Crystallization of Zeolite A Coatings from Natural Zeolite
An investigation was carried out to determine the possibility of preparing coatings of synthetic zeolites on stainless steel from mixtures containing natural zeolite. Hydrothermal synthesis was applied and the coatings obtained were characterized by various techniques. It was observed that crystalline zeolite A coatings could be prepared from natural clinopt
Mat. Res.. Publicado em: 10/11/2016