Synthesis and characterization of alumina fibers using solution blow spinning
AUTOR(ES)
Mota, M. F.
FONTE
Cerâmica
DATA DE PUBLICAÇÃO
06/06/2019
RESUMO
Resumo Esse trabalho mostra a produção de nanofibras de alumina após tratamento térmico de fibras híbridas preparadas por fiação por sopro em solução. Essas nanofibras foram convertidas em γ-Al2O3 e α-Al2O3 após tratamento térmico ao ar entre 500 e 1200 °C. Os padrões de difração de raios X apresentaram todas as características das fases alumina γ e α. Além disso, as micrografias eletrônicas de varredura mostraram que os diâmetros das nanofibras de alumina variaram entre 200 e 270 nm para diferentes temperaturas. Os resultados demonstraram que o método de fiação por sopro em solução é eficiente para produzir nanofibras de alumina.Abstract This work shows the successful production of alumina nanofibers after thermal treatment of solution blow spun hybrid fibers. These nanofibers were converted into γ-Al2O3 and α-Al2O3 after the thermal treatment in air between 500 to 1200 °C. The X-ray diffraction patterns presented all the characteristics of the γ and α phases of alumina. In addition, the scanning electron micrographs showed alumina nanofiber diameters varying between 200 and 270 nm for different temperatures. The results demonstrated that the solution blowing spinning method is efficient to produce alumina nanofibers.
Documentos Relacionados
- Calcium phosphate submicrometric fibers produced by solution blow spinning
- Production of fibrous polymer scaffolds for tissue engineering using an automated solution blow spinning system
- Fabrication of Fish Gelatin Microfibrous Mats by Solution Blow Spinning
- Nanofibras de ferrita CaFe 2 O 4 via solution blow spinning - SBS
- Synthesis and characterization of activated carbon fibers from Kevlar