Aisi 316l
Mostrando 13-24 de 75 artigos, teses e dissertações.
-
13. Influence of Microstructure on the Corrosion Resistance of AISI 317L (UNS S31703)
The AISI 317L stainless steel is an austenitic grade with at least 3%Mo. Recently, this steel has replaced AISI 316L in many applications in chemical and petrochemical industries, due to its higher pitting corrosion resistance. The microstructure of the hot rolled and annealed material studied in this work consists of austenitic grains and 4.0% of delta ferr
Mat. Res.. Publicado em: 15/05/2017
-
14. Estudo do Processo TIG Hot-Wire com Material de Adição AISI-316L Analisando o Efeito do Sopro Magnético do Arco sobre a Diluição do Cordão de Solda
Resumo: O processo TIG com adição de arame quente (HotWire) é considerado um processo altamente produtivo em comparação ao processo TIG convencional com arame frio (ColdWire), sendo possível alcançar grandes taxas de deposição e baixas porcentagens de diluição, características essas que permitem ao processo ser uma ótima alternativa para aplica�
Soldag. insp.. Publicado em: 2016-09
-
15. Soldagem por Difusão de Aços Inoxidáveis para Fabricação de Trocadores de Calor Compactos
Resumo A união de materiais diferentes ou componentes com geometrias complexas muitas vezes requer processos de uniões especiais, como por exemplo, uma fonte de energia de alta densidade como laser ou feixe de elétrons para soldagem por fusão ou mesmo um processo de soldagem no estado sólido. Em particular, este trabalho descreve os experimentos recente
Soldag. insp.. Publicado em: 2016-03
-
16. Effects of Thermal Aging on Microstructure and Corrosion Resistance of AISI 317L Steel Weld Metal in the FSW Process
The AISI 317L grade is an austenitic stainless steel with high Mo content (3.0 wt% min.). Due to the higher pitting resistance, this grade has replaced AISI 316L steel in many applications where the corrosion resistance is a critical property. However, the high Mo can induce phase transformations in high temperature services. In modern oil refinaries and pet
Mat. Res.. Publicado em: 23/10/2015
-
17. Effect of Track Overlap on the Microstructure and Properties of the CoCrMoSi PTA Coatings
Broadly speaking, the research and design of coatings are generally studied by way of single-track deposits; otherwise, the development of a coated part entails the understanding of how multi-track welding influences the microstructure and properties of the surface. This study evaluated the effect of track overlap on the microstructure and properties of the
Mat. Res.. Publicado em: 2015-06
-
18. Influência do Processamento sobre a Microestrutura e Propriedades de Revestimentos da liga CoCrMoSi por PTA
ResumoO desempenho em desgaste e a tenacidade das ligas CoCrMoSi estão associados à presença de fase de Laves. Neste sentido, o teor de elementos de liga vem sendo alterado para reduzir a fragilidade em algumas ligas recentemente propostas. O presente estudo avaliou revestimentos por Plasma com Arco Transferido (PTA) para diferentes graus de interação c
Soldag. insp.. Publicado em: 2015-06
-
19. Resistance of oxidative stress in biofilm and planktonic cells
This work studied the susceptibility of biofilm produced by E. coli to oxidative stress, and compared the components of free radicals defences: level of glutathione, catalase and dismutase activities in planktonic and biofilm located cells. Results showed the diversity of responses to oxidative stress in bacterial cells in log or stationary phases in both pl
Braz. arch. biol. technol.. Publicado em: 2015-04
-
20. Microstructural Transformations in Dissimilar Welds between Austenitic Stainless Steel and Ferritic Stainless Steel
This research studies the metallurgical transformations taking place the SMAW welding of AISI 316L austenitic stainless steel with AISI 430 ferritic stainless steel. To perform the study were used two different electrodes, AWS E309L austenitic and AWS E2209-16 duplex stainless steels 3.2 mm diameter. The joints were made with a single-pass welding including
Soldag. insp.. Publicado em: 2015-03
-
21. Microstructure and Properties of Nickel-based C276 Alloy Coatings by PTA on AISI 316L and API 5L X70 Steel Substrates
This work assessed Ni-based C276 alloy coatings by PTA with different degree of interaction with AISI 316L and API 5L X70 steel substrates. Track geometry, dilution and microstructure of coatings were evaluated by optical, scanning electron microscopy and X-ray diffraction. Properties were evaluated by hardness and wear tests. Microstructure exhibited austen
Mat. Res.. Publicado em: 2015-02
-
22. Study of expanded austenite formed in plasma nitrided AISI 316L samples, using synchrotron radiation diffraction
AISI 316L stainless steel samples nitrided at different conditions of temperature and time, showing different properties, such as nitrogen concentration (C N) and nitrided layer thickness, were studied. Expanded austenite (γN) diffraction peaks up to the (222) reflection were observed using suitable wavelength synchrotron radiation. XRD patterns were fitted
Mat. Res.. Publicado em: 11/11/2014
-
23. Efeito da corrente de deposição sobre a microestrutura e propriedades de revestimentos de liga CoCrWC por PTA
As ligas a base de Cobalto são largamente aplicadas à superfície de componentes na forma de revestimentos soldados. O sistema CoCrWC reforçado por carbonetos é utilizado para ampliar a vida em serviço em ambientes agressivos que envolvem desgaste e corrosão em diferentes meios. Este trabalho busca avaliar o efeito da corrente de deposição sobre a mi
Soldag. insp.. Publicado em: 2014-09
-
24. Impacto da diluição na microestrutura e propriedades de revestimentos da liga de Níquel 625
Liga de Níquel do tipo IN 625 é usada para proteger componentes de turbinas aeronáuticas ou de geração de energia e de refinarias de petróleo, especialmente devido a uma associação de tenacidade e elevada resistência à corrosão. Estas propriedades são associadas com a composição química e com a microestrutura dos revestimentos que dependem dos
Soldag. insp.. Publicado em: 2014-06