Afm
Mostrando 13-24 de 618 artigos, teses e dissertações.
-
13. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
14. Atomic force microscopy evidences of bacterial cell damage caused by propolis extracts on E. coli and S. aureus
Abstract The interaction of the aqueous extract of green propolis with the bacterial envelope was investigated using atomic force microscopy on E. coli and S. aureus, as Gram-negative and Gram-positive model microorganisms. The bacteria were incubated in the extracts with variable proportions of water/ethanol, i.e., in different concentrations of total pheno
Food Sci. Technol. Publicado em: 20/12/2019
-
15. In vitro biological activities of silver nanoparticles synthesized from Scedosporium sp. isolated from soil
One of the important fields in nanotechnology is the development of an environment friendly method for the synthesis of nanoparticles. Many approaches show that microorganisms are the most reliable tools for biosynthesis of nanoparticles compared to physical and chemical methods. In our study, fungi have been exploited for extracellular production of metal n
Braz. J. Pharm. Sci.. Publicado em: 20/12/2019
-
16. Influence of cigarette smoke combined with different toothpastes on enamel erosion
Abstract: This in vitro study aimed to evaluate the effect of different toothpastes on dental enamel subjected to an erosive cycle with and without exposure to cigarette smoke. Bovine enamel specimens were randomly allocated into 12 groups (n = 12). For the in vitro simulation of smoking, half the groups underwent an exposure cycle of 20 cigarettes per day f
Braz. oral res.. Publicado em: 02/12/2019
-
17. Influence of doping with Sm3+ on photocatalytic reuse of ZnO thin films obtained by spin coating
ABSTRACT The difficulty in the powder reuse favors the study of materials in the form of thin films. ZnO based films have high photocatalytic potential. In this work, ZnO:xSm3+ (x = 0, 1, 2 and 4 %mol) thin films were prepared by spin coating method. The resins obtained to manufacture the thin films were prepared by complex polymerization method. The samples
Matéria (Rio J.). Publicado em: 25/11/2019
-
18. Study of obtaining thin films of CeO2 doped with 2 and 4 mol% of europium, terbium and thulium by spin coating: photocatalytic properties
Resumo Neste estudo, filmes finos de CeO2 dopados com Eu3+, Tb3+ e Tm3+ nas proporções de 2 e 4 %mol foram obtidos por spin coating e calcinados em 700 °C. Os filmes foram caracterizados pelas técnicas de DRX, MEV, MFA e UV-vis. As propriedades fotocatalíticas dos filmes finos foram determinadas pela degradação do corante azul de metileno (AM). Os fil
Cerâmica. Publicado em: 14/11/2019
-
19. Effect of grape seed extract-containing phosphoric acid formulations on bonding to enamel and dentin
Abstract The aim was to evaluate the effect of 2% grape seed extract (GSE) containing phosphoric acid (PhA) on the bond strength to enamel and dentin. The control group was 37% PhA. The following three PhA formulations with 2% GSE and 20% ethanol were obtained: GSE5 = 5% PhA; GSE10 = 10% PhA; and GSE20 = 20% PhA. The enamel and dentin surfaces of molars were
Braz. oral res.. Publicado em: 28/10/2019
-
20. Is Moderate Intensity Exercise during Pregnancy Safe for the Fetus? An Open Clinical Trial
Resumo Objetivo Determinar o efeito da caminhada em esteira sobre a frequência cardíaca materna (FCM) e parâmetros cardiotocográficos (batimentos cardiofetais basais [BCFs], movimentos ativos fetais [MAFs], número de acelerações e desacelerações e variabilidade de curta [STV] e longa [LTV] duração da frequência cardíaca fetal) em gestantes na
Rev. Bras. Ginecol. Obstet.. Publicado em: 30/09/2019
-
21. Electrospinning synthesis and assessment of physicochemical properties and biocompatibility of cobalt nitrate fibers for wound healing applications
Abstract: The aim of this study was to develop polyurethane (PU) wound dressing incorporated with cobalt nitrate using electrospinning technique. The morphology analysis revealed that the developed composites exhibited reduced fiber and pore diameter than the pristine PU. The electrospun membranes exhibited average porosity in the range of 67% - 71%. Energy-
An. Acad. Bras. Ciênc.. Publicado em: 29/07/2019
-
22. FUNCTIONALIZED GRAPHENE-BASED MATERIALS AS INNOVATIVE ADSORBENTS OF ORGANIC POLLUTANTS: A CONCISE OVERVIEW
ABSTRACT The functionalization of graphene nanosheets is the cutting edge of materials sciences nowadays. Such research promotes the development of innovative, low cost and highly capable sorbents. This review article aims to assemble the available information on functionalized graphene used for the adsorption of organic pollutants and establishes a critical
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
23. Blood compatibility assessments of electrospun polyurethane nanocomposites blended with megni oil for tissue engineering applications
Abstract: Tissue engineering holds as a prominent technique to repair or replace the damaged human parts to recreate its native function. In this research, a novel scaffold based on polyurethane (PU) comprising megni oil was electrospun for tissue engineering applications. The obtained polyurethane blended with megni oil nanofibers were characterized by scan
An. Acad. Bras. Ciênc.. Publicado em: 19/06/2019
-
24. Corrosion and Micro-abrasive Wear Behaviour of 2524-T3 Aluminium Alloy with PAni-NPs/PSS LbL Coating
In this paper, we present an alternative method to obtain thin films for coating protection on the surface of the AA2524-T3 Al-alloy by using the Layer-by-Layer (LbL) technique. The LbL films were fabricated by alternated immersion of the Al-alloy into a poly(styrene sulfonate) (PSS) and polyaniline nanoparticles (PAni-NPs) solutions, obtaining a PAni-NPs/PS
Mat. Res.. Publicado em: 06/06/2019