Adaptive Mesh
Mostrando 1-12 de 23 artigos, teses e dissertações.
-
1. GPU Finite Element Method Computation Strategy Without Mesh Coloring
Abstract A GPU-adapted Finite Element Method (A-FEM) implementation without using a mesh coloring strategy to avoid race conditions is presented. All the elements are simultaneously processed, and the local data is computed and consolidated into the device memory in a new adapted Coordinate Format data structure (a-COO). The comparison between the proposed s
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
2. 3D numerical investigation of mixture formation and combustion in a DISI engine at part-load under stratified operation
This work investigates through numerical simulation, the operation of a big bore direct fuel injection spark ignition engine, at part load under stratified operation. It evaluates fuel-air mixture preparation and combustion process with the adoption of detailed chemical kinetics mechanisms for both Isooctane and Ethanol, and applying adaptive mesh refinement
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2020
-
3. Structure and ecological aspects of zooplankton (Testate amoebae, Rotifera, Cladocera and Copepoda) in highland streams in southern Brazil
Resumo Objetivo: Este estudo teve como objetivo caracterizar a estrutura do zooplâncton em rios de montanha no sul do Brasil, sub-bacia do rio Pelotas, bem como, as respectivas relações com as condições ambientais nas diferentes estações do ano. Métodos O zooplâncton foi coletado usando uma rede de plâncton (malha de 68 μm) e concentrado em um
Acta Limnol. Bras.. Publicado em: 18/02/2019
-
4. A Numerical Study on Smart Material Selection for Flapped and Twisted Morphing Wing Configurations
ABSTRACT: The developments of innovative adaptive structures on Unmanned Aerial Vehicles (UAVs), such as morphing wings, can potentially reduce system complexities by eliminating control surfaces and their auxiliary equipment. This technology has the potential of allowing a UAV to adapt to different mission requirements or to execute a particular mission mor
J. Aerosp. Technol. Manag.. Publicado em: 2014-09
-
5. Simulação computacional de escoamentos reativos com baixo número Mach aplicando técnicas de refinamento adaptativo de malhas / Computational simulation of low Mach number reacting flows applying adaptive mesh refinement techniques.
It is the main goal of the present work to extend a numerical methodology based on both the use of an adaptive mesh refinement technique (AMR) and the use of a multistep, implicit-explicit time-step strategy (IMEX) to applications involving low Mach number reactive flows. Originally developed for incompressible flows, the Eulerian formulation of that methodo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/06/2012
-
6. Um esquema de seleção de rotas para o balanceamento de segurança e desempenho em redes em malha sem fio / Um Esquema de Seleção de Rotas para o Balanceamento de Segurança e Desempenho em Redes em Malha Sem Fio
Wireless mesh networks (WMNs) have been used to support multimedia applications on different domains, such as health care and entertainment, that require high levels of security and performance simultaneously. Those networks comprise of a wireless backbone of routers that cooperate to provide data communication among mobile devices, such as notebooks, PDAs a
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/05/2011
-
7. PARALLEL TOPOLOGICAL SUPPORT FOR FINITE ELEMENT MESHES IN DYNAMIC FRACTURE AND FRAGMENTATION ANALYSES / SUPORTE TOPOLÓGICO EM PARALELO PARA MALHAS DE ELEMENTOS FINITOS EM ANÁLISES DINÂMICAS DE FRATURA E FRAGMENTAÇÃO
Fracture propagation and fragmentation phenomena in solids can be described by Cohesive Zone Models and simulated with the Finite Element Method. Among the computational approaches of recent interest for fracture representation in finite element meshes are those based on cohesive elements. In those approaches, fracture behavior is represented by cohesive ele
Publicado em: 2011
-
8. An assessment of unstructured grid finite volume schemes for cold gas hypersonic flow calculations
Abstract: A comparison of five different spatial discretization schemes is performed considering a typical high speed flow application. Flowfields are simulated using the 2-D Euler equations, discretized in a cell-centered finite volume procedure on unstructured triangular meshes. The algorithms studied include a central difference-type scheme, and 1st- and
J. Aerosp. Technol. Manag.. Publicado em: 2009-12
-
9. A comparative study of implicit and explicit methods using unstructured voronoi meshes in petroleum reservoir simulation
This work presents a comparative study among three linearization schemes widely used in petroleum reservoir simulation, namely the Implicit Pressure Explicit Saturation (IMPES), Fully Implicit (FI) and Adaptive Implicit Method (AIM). Attention is given to the criterion used for switching from IMPES to FI and vice-versa. The black-oil model considering the oi
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-12
-
10. Mathematical Modeling and Numeriacal Methods for Simulation of the Heat Conduction in Liquid Helium / Modelagem Matemática e Métodos Numéricos para Simulação da Condução do Calor no Hélio Líquido
The element helium, found mainly in natural gas reserves, condenses at temperature of 4.2K, and is the unique known substance that remains in liquid to absolute zero. In the liquid phase, the helium presents still another phase change in 2.19K, where passes of common liquid to superfluous liquid, with almost zero viscosity. These properties give the helium i
Publicado em: 2009
-
11. An adaptive mesh strategy for high compressible flows based on nodal re-allocation
An adaptive mesh strategy based on nodal re-allocation is presented in this work. This technique is applied to problems involving compressible flows with strong shocks waves, improving the accuracy and efficiency of the numerical solution. The initial mesh is continuously adapted during the solution process keeping, as much as possible, mesh smoothness and l
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2008-09
-
12. Adaptive 2-D mesh generator for electromagnetic problems / Gerador adaptativo de malhas 2-D para problemas eletromagneticos
This work presents the development of algorithms for adaptive mesh generation of triangular elements applicable to electromagnetic propagation problems in bidimensional domains. Several techniques were used, such as edgeflip, known as Delaunay method, and the Laplacian?s smoothing method. The program considers arbitrary curvature interfaces and can be easily
Publicado em: 2007