Abrasion
Mostrando 13-24 de 241 artigos, teses e dissertações.
-
13. Presence of iron in polymers extruded with corrosive contaminants or abrasive fillers
Abstract Off-site measurements of the dimensions of extruder screws are used to monitor their wear. This wear causes the presence of metals in the processed polymer. We detected the presence of iron in polymers processed with corrosive contaminants or abrasive fillers. To this end we processed poly(ethylene terephthalate), PET, pure or contaminated with poly
Polímeros. Publicado em: 10/06/2019
-
14. Simple and Low-Cost Thermal Treatments on Direct Resin Composites for Indirect Use
Resumo O objetivo deste estudo foi avaliar a influência de três tratamentos térmicos adicionais de baixo custo, disponíveis no consultório dentário, nas propriedades mecânicas, químicas e ópticas de uma resina composta fotoativada indicada para restaurações diretas porém usada como restaurador indireto. A resina composta direta TPH3 (Dentsply) fo
Braz. Dent. J.. Publicado em: 03/06/2019
-
15. Sampling strategy of an epidemiological survey using a satellite image program
ABSTRACT OBJECTIVE To describe the sampling strategy of an epidemiological survey with the aid of satellite images, including details of the multistage probability sampling process. METHODS A probability sample of individuals living in the rural area of Rosário do Sul, state of Rio Grande do Sul, Brazil, aged 15 years old or more, was evaluated. Participa
Rev. Saúde Pública. Publicado em: 06/05/2019
-
16. A new approach for Y-TZP surface treatment: evaluations of roughness and bond strength to resin cemen
Abstract Objective This study aims to evaluate the effect of sonochemical treatment on the surface of yttria-stabilized tetragonal zirconia (Y-TZP) before and after the final sintering. Material and Methods Twenty-eight Y-TZP discs were divided into four groups (n=7), according to surface treatment: PRE: pre-sintering sonication with 30% nominal power fo
J. Appl. Oral Sci.. Publicado em: 11/04/2019
-
17. Polyhedral Oligomeric Silsesquioxane (POSS) as Reinforcing Agent for Waterborne Polyurethane Coatings on Wood
Polyhedral oligomeric silsesquioxane (POSS) was added as a reinforcing agent in waterborne polyurethane (WPU)-based coatings to improve their properties. The morphology, structure, thermal stability as well as mechanical properties of the resulting WPU and WPU/POSS hybrid films were investigated. The good compatibility of POSS in the WPU matrices was demonst
Mat. Res.. Publicado em: 04/01/2019
-
18. Effect of Experimental Parameters on Wear Response of Thermally Sprayed Carbide Based Coatings
Friction and abrasive wear response of WC-12 Co and Cr3C2-25 NiCr coatings was studied. Abrasive wear experiments were conducted with SiC abrasive particles with varying load and sliding speeds. The results were analyzed using SEM, XRD and XPS observations of worn surfaces, wear debris and worn out abrasive paper. Friction coefficient diminished with rise in
Mat. Res.. Publicado em: 08/11/2018
-
19. Efecto de los parámetros de aplicación en recubrimientos de Ni-Cr-B-Fe-Si obtenidos por Flame Spray
ABSTRACT Surface damage of components in service is an issue of great industrial interest because of the costs associated to the replacement of certain critical components. There are several techniques to generate coatings, which provide increased resistance to a particular type of surface damage. In this way, it is achieved surface protection to different s
Matéria (Rio J.). Publicado em: 02/08/2018
-
20. Estudio del comportamiento de fundición CADI sometida a FCR
ABSTRACT Ductile Iron (DI) is a development of the iron alloys introduced in the ´50s, with free graphite in the form of nodules. Austempered Ductile Iron (ADI) is a development of DI later introduced, consisting on austempering heat treatment in order to obtain a high strength and high toughness material. Carbidic Austempered Ductile Iron (CADI) is a more
Matéria (Rio J.). Publicado em: 19/07/2018
-
21. First evaluation of semidirect recycling methods for the reclamation of cemented carbides based on a literature survey
ABSTRACT At the moment the industrially applied techniques for cemented carbide reclamation feature several deficiencies. Depending on the process route, obstacles consist in high energy and chemical consumption (indirect recycling methods) or a deterioration of the recycled product in comparison with the primary material (direct recycling approach). Therefo
Matéria (Rio J.). Publicado em: 19/07/2018
-
22. Fatiga de contacto por rodadura en acero SAE 1050 recubierto con TiN, posteriormente templado
ABSTRACT The use of ceramic coatings of the nitride, carbide, or diamond type on steel substrates promotes the improvement of tribology properties. Nevertheless, high hardness gradients and adhesion problems may deteriorate the performance of these coatings when subjected to Rolling Contact Fatigue (RCF). Some studies on steels with ceramic coatings were car
Matéria (Rio J.). Publicado em: 19/07/2018
-
23. Non-contact profilometry of eroded and abraded enamel irradiated with an Er:YAG laser
Abstract Literature has reported positive results regarding the use of lasers in the control of erosive lesions; however, evaluating whether they are effective in the control of the progression of erosive/abrasive lesions is important. Objectives This study aimed to evaluate the effect of the Er:YAG laser irradiation in controlling the progression of erosio
J. Appl. Oral Sci.. Publicado em: 07/05/2018
-
24. Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments
Abstract: The effects of several ceramic surface treatments on bond strength of a polymer-infiltrated ceramic network and resin composite as repair material were evaluated. CAD-CAM blocks of a polymer-infiltrated ceramic network (Vita Enamic) were sliced and subjected to aging process, followed by embedding in acrylic resin. The bonding/repair area was treat
Braz. oral res.. Publicado em: 05/04/2018