Rolling Abrasion
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. Estudio del comportamiento de fundición CADI sometida a FCR
ABSTRACT Ductile Iron (DI) is a development of the iron alloys introduced in the ´50s, with free graphite in the form of nodules. Austempered Ductile Iron (ADI) is a development of DI later introduced, consisting on austempering heat treatment in order to obtain a high strength and high toughness material. Carbidic Austempered Ductile Iron (CADI) is a more
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Fatiga de contacto por rodadura en acero SAE 1050 recubierto con TiN, posteriormente templado
ABSTRACT The use of ceramic coatings of the nitride, carbide, or diamond type on steel substrates promotes the improvement of tribology properties. Nevertheless, high hardness gradients and adhesion problems may deteriorate the performance of these coatings when subjected to Rolling Contact Fatigue (RCF). Some studies on steels with ceramic coatings were car
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Microstructure and Mechanical Properties of Borided Inconel 625 Superalloy
ABSTRACT The Ni- based superalloy Inconel 625 is extensively used owing to its high strength, excellent fabricability, good weldability and outstanding resistance to high temperature corrosion against aggressive environments. However, despite its unique properties and extensive use, its wear resistance is in some cases unsatisfactory. In this study, Inconel
Matéria (Rio J.). Publicado em: 22/06/2017
-
4. Estudo do desgaste e atrito em ensaios micro-abrasivos por esfera rotativa fixa em condições de força normal constante e pressão constante. / Wear and friction study in micro-abrasive wear testing by rotative fixed ball under conditions of constant normal force and constant pressure.
The micro-scale abrasive wear test by rotative ball has gained large acceptance in universities and research centers, being widely used in studies on the abrasive wear of materials. Two wear modes are usually observed in this type of test: rolling abrasion results when the abrasive particles roll on the surface of the tested specimen, while grooving abrasion
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/06/2011
-
5. Efeito de fibras sintéticas nas propriedades de ligantes e concretos asfálticos
The asphalt cement plays a major role in hot mix asphalts (HMA) by bonding the mineral aggregates and conferring impermeability. Despite the relatively small percentage of asphalt cement in hot mixes, the mechanical properties of asphalt layers are highly dependent on the quality of the binder. The physical and rheological properties of asphalt binders can b
Publicado em: 2010
-
6. Influência de parâmetros microestruturais no comportamento tribológico de ligas ferrosas multicomponentes / Influence of microstructural parameters on the tribological behavior of multicomponent ferrous alloys
The aim of this work is to evaluate the effect of microstructural parameters (eutectic carbides and matrix hardness) of multi-component ferrous alloys on tribological behavior in sliding wear and micro-abrasive wear. The samples were two series of alloys with variable vanadium (V serie) and molybdenum (M serie) contents and fixed amounts of other elements. E
Publicado em: 2007
-
7. Estudo do comportamento do coeficiente de desgaste e dos modos de desgaste abrasivo em ensaios de desgaste micro-abrasivo. / Wear coefficient and wear mode transition study in micro-abrasive wear testing.
This work presents a study on the behavior of different materials under the action of micro-abrasive wear. A micro-abrasive wear testing machine with fixed sphere was designed and constructed, presenting a mechanical configuration with differences with respect to those found in the literature (Gee et al., 2005). M2 tool steel and WC-Co P20 were used as testi
Publicado em: 2006
-
8. Desgaste e fadiga térmica de ligas aço matriz + NbC. / Wear and thermal fatigue of matrix steel + NbCalloys.
The concept of ?matrix steel + NbC? was used to cast alloys with the M2 steel matrix (0,5%C ? 2%W ? 3%Mo ? 4,6%Cr ? 1%V) and different volume fractions of niobium carbides. Niobium (2,5 e 5%) and stoichiometric carbon were added to produce NbC carbides and titanium (0,1%) to modify de NbC carbides morphology. NbC presented three basic morphologies: Chinese s
Publicado em: 2006