Photoelasticity
Mostrando 1-12 de 42 artigos, teses e dissertações.
-
1. Relevance of Resin for Photoelasticity
The goal of this study is to test photoelastic resins for manufacturing models with teeth and/or implants under chewing load. Four commercial brands have been chosen: Araldite (Ciba Chemicals), Flexible GIV-Rigid GIV (Polipox) and PL2 (Measurements Group). Nine discs were manufactured, four of them from each of the photoelastic resin brands and five from dif
Mat. Res.. Publicado em: 20/01/2020
-
2. Analysis of stress induced by screws in the vertebral fixation system
Objective: To compare, using photoelasticity, internal stress produced by USS II type screw with 5.2 and 6.2 mm external diameters, when submitted to three different pullout strengths. Methods: Two photoelastic models were especially made. The simulation was performed using loads of 1.8, 2.4 e 3.3 kgf.The fringe orders were evaluated around the screws.
Acta ortop. bras.. Publicado em: 2014
-
3. New numerical method for the photoelastic technique
The objective of this research is to find new equations for a novel phase-shifting method in digital photoelasticity. Some innovations are proposed. In terms of phase-shifting, only the analyzer is rotated, and the other equations are deduced by applying a new numerical technique instead of the usual algebraic techniques. This approach can be used to calcula
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012-12
-
4. Photoelastic analysis of stress generated by a silorane-based restoration system
Silorane-based composite, an epoxy material, was marketed as promising less polymerization contraction than conventional restorative materials. The aim of this study was to evaluate, by means of photoelasticity, the polymerization stress generated by a silorane-based composite. Thirty photoelastic rings with orifices measuring 5 mm (d) × 3 mm (h) were prepa
Brazilian Oral Research. Publicado em: 2011-08
-
5. Aplicação de técnica óptica no estudo da distribuição de tensões em modelos reduzidos de feixe de toras e peças serradas / Use of optical techniques applied on stress distribution study of reduced bundle log models and sawn pieces
A silvicultura ocupa a segunda posição no agronegócio brasileiro, exibindo grande importância econômica e social para o país. As atividades econômicas associadas ao reflorestamento enfrentam diversos obstáculos internos e externos, os quais se contrapõem ao crescimento desse setor no país. Nesse sentido, o transporte de madeira se torna um fator de
Publicado em: 2011
-
6. Influência da intensidade de carregamento e utilização de placa oclusal plana em supraestruturas metálicas parafusadas sobre implantes: estudo fotoelástico / Influence of the intensity of loading and use of an occlusal splint flat screw-retained metal superstructures on implants: photoelastic study
Objetivo: Avaliar por meio do estudo fotoelástico qualitativo as tensões geradas no longo eixo dos implantes e interimplantes nas regiões cervical, média e apical quando submetidos a diferentes carregamentos com ou sem interposição de placa oclusal plana. Método: Foram confeccionados quatro modelos fotoelásticos, com dois implantes hexágono externo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/08/2010
-
7. Estudo do ensaio de determinação da tenacidade à fratura em deformação plana (KIc) em PMMA e análise das tensões desenvolvidas por fotoelasticidade. / Study of test for determining fracture toughness in plane strain (KIc) in PMMA and stress analysis developed by photoelasticity.
Single-Edge-Notch Bending samples produced out of compression-molded plates obtained from a commercial Poly(methyl metacrylate), PMMA, resin were investigated concerning the influence of the adopted pre-cracking methodology on plane strain fracture toughness results according to ASTM D 5045 standard. Two sets of 6 samples each were pre-cracked using a sharp-
Publicado em: 2010
-
8. Aplicação da técnica da fotoelasticidade na análise de fundações por estacas helicoidais / Aplication of the photoelastic method to the analysis of helical screw pile foundations
A técnica da fotoelasticidade pode ser particularmente útil na análise de tensões em sistemas com geometrias complexas. Em um equipamento chamado polariscópio, um feixe de luz polarizada atravessa o modelo fotoelástico que representa o protótipo. Ao submeter este modelo a um carregamento, faixas de diferentes cores poderão ser visualizadas. Cada cor
Publicado em: 2010
-
9. Análise fotoelástica de distribuição de tensões em implantes paralelos e em protocolo tipo all-on-four / Photoelastic analysis of stress distribution in parallel implants and protocol all-on-four
O objetivo nesta pesquisa foi avaliar in vitro através da fotoelasticidade, as tensões induzidas em protocolos com implantes inclinados (conceito All-on-Four) e paralelos, utilizados em prótese sobre implantes mandibulares com infraestruturas confeccionadas em titânio, soldadas a laser e submetidos à carga distal. Os protocolos foram confeccionados com
Publicado em: 2010
-
10. Influência do contato interproximal em próteses fixas implanto-suportadas na mandíbula edentada posterior análise fotoelástica
O uso de próteses parciais fixas em reabilitações de áreas edentadas posteriores inferiores com implantes é um fato bem documentado, apesar de haver controvérsias sobre a esplintagem ou não de coroas sobre implantes nessas condições. Logo, o objetivo deste estudo foi analisar o efeito da separação das coroas de uma prótese parcial fixa sobre impl
Publicado em: 2009
-
11. Stresses distributions of screws of the vertebral fixation systems submitted to pullout strength using plane transmission photoelasticity. / Distribuição de tensões de parafusos do sistema de fixação vertebral submetidos a arrancamento utilizando fotoelasticidade de transmissão plana
The treatment of spinal deformities, degenerative disease, injuries and tumors on the vertebral column often demand the accomplishment of the internal fixation. The pedicular screws arising enabled the accomplishment of column segmental instrumentation more stable and became a standard procedure in accomplishing surgeries of correction, deformities stabiliza
Publicado em: 2008
-
12. Análise fotoelástica de modelo de vértebra sob influência de parafuso pedicular / Photoelastic analysis of a vertebra model under the pedicular screw influence
O sistema de fixação vertebral utilizando o parafuso pedicular é um dos métodos mais eficientes no tratamento de patologias da coluna vertebral. Quando o parafuso estiver submetido à força de arrancamento, ele gera tensões ao redor, principalmente próximo do canal medular, situação que pode ser analisada pela técnica da fotoelasticidade. O objetiv
Publicado em: 2008