Mechanical Inspection
Mostrando 1-12 de 25 artigos, teses e dissertações.
-
1. Mechanical and histological evaluation of a titanium device for orthodontic anchorage, placed with or without cyanoacrylate adhesive
RESUMO Objetivos: este estudo teve como objetivo realizar uma avaliação histológica de um mini-implante para ancoragem em Ortodontia. Avaliou-se, também, a carga de cisalhamento e o padrão de fratura imediatamente e após 30 e 60 dias da sua inserção, com ou sem o uso do adesivo N-butil-2-cianoacrilato. Métodos: noventa e seis mini-implantes (Arro
Dental Press J. Orthod.. Publicado em: 01/08/2019
-
2. Caracterização macroscópica e microscópica da pododermatite em relação à classificação industrial de pés de frango para consumo humano
RESUMO O presente trabalho teve como objetivo identificar e classificar a pododermatite em frangos de corte, comparando as lesões microscópicas com os aspectos macroscópicos utilizados pela inspeção sanitária. Foi realizada coleta de pés de frangos de corte, em matadouro de aves sob inspeção sanitária, após classificação utilizada nos padrões p
Arq. Bras. Med. Vet. Zootec.. Publicado em: 14/06/2019
-
3. Thermomechanical Modelling of FSW Process Using a Cylindrical Tool in an Aluminum Alloy Alclad AA 2024-T3
The Friction Stir Welding Process (FSW/P) is an innovative technique to join metals using the plasticity, not occurring the melting. It was initially applied in aluminum alloys, but recently it has been extended to other materials, for example, copper, steel alloys, polimers and others. In this work it is analyzed the thermo mechanical modelling of the energ
Mat. Res.. Publicado em: 07/05/2018
-
4. Microstructural and Micromechanical Effects of Cold Roll-forming on High Strength Dual Phase Steels
In this work correlation between the 1000 MPa dual phase (DP) steel microstructure and the strain gained after roll-forming process have been studied by both microstructural and micromechanical analysis. The scanning electron microscope (SEM) inspection in the bent area reveals changes in the ferrite-martensitic microstructure. The plastic deformation of DP
Mat. Res.. Publicado em: 2015-08
-
5. Simulação da propagação de ondas ultrassônicas longitudinais em materiais estruturais aeroespaciais / Simulating the propagation of longitudinal ultrasonic waves in aerospace structural materials
The use of composite materials in the aerospace industry is increasing due to its low ratio between density and mechanical strength. To perform non-destructive testing using ultrasound, it is necessary to know the sound velocity in these materials. It is not always possible to manufacture physical prototypes during the development of a project because of tim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2012
-
6. Avaliação de postes de Eucalyptus retirados da rede elétrica por microscopia eletrônica de varredura e ensaios de flexão
This paper presents results of tests on poles of wood of different species of Eucalyptus, new and removed from the network of distribution of electric energy in southern Brazil. Are presented correlations between mechanical properties, density, state of deterioration and lumen diameter of Eucalyptus poles. The state of deterioration was determined by field i
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/03/2012
-
7. Análise de blocos estruturais de concreto utilizando a técnica da ultrassonografia
The use of non-destructive testing (NDT) inspection and ultrasound evaluation of physical and mechanical properties of concrete has been in recent years, the subject of advanced studies both in academia and in science. This technique, known more and more, gaining new fans and greater reliability along the production chain of Construction, focused only on ins
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/02/2011
-
8. Compósitos avançados epóxi/fibra de vidro com elevado teor de nanotubos de carbono
The use of carbon nanotubes (CNT) in Epoxy (EP)/Glass Fiber (GF) composites, producing tri-component composites, has been widely researched, with some interesting results related to mechanical and electromagnetic properties. When the goal is a significant improvement in mechanical properties, CNT content greater than 1%wt. may be necessary, which yields seri
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
9. Estudo da causa de falhas dos aços inoxidáveis austeníticos utilizados em implantes ortopédicos
Given the variety of metallic materials used in orthopedic implants, the austenitic stainless steel type 316L and F138 have been widely used in Brazil as biocompatible material. Used by the public health, mainly due to it is low cost of manufacture compared to other materials, and because of the good combination of properties of which can be highlighted: The
Publicado em: 2010
-
10. Telescopic continuum robot for tasks at high positions. / Robô contínuo telescópico para tarefas em alturas elevadas.
Among several applications of robots in the service field, it is possible to percept an increasing interest in manipulate tools in higher positions using automatic devices, due to the fact that such activities are high risked operations and demands the use of several safety equipments. The most common examples of this kind of activity are the inspection of m
Publicado em: 2009
-
11. Nonlinear boundary element models to analyse fracture problems and reliability/optimization models applied to structures submitted to fatigue / Modelos não lineares do método dos elementos de contorno para análise de problemas de fratura e aplicação de modelos de confiabilidade e otimização em estruturas submetidas à fadiga
This work deals with the development of boundary element method (BEM) formulations to be used in engineering problems. Particular attention is given to using these formulations in development of reliability and optimization models applied to fatigue problems. Contributions to BEM formulations are developed, particularly, models that deal with crack growth in
Publicado em: 2009
-
12. Aplicação de moire de projeção com deslocamento de fase na geração de modelos digitais topograficos de orgão vegetais / Applications of projection moire technique with phase shifiting to agricultural engineering problems
Shape definition of bodies exhibiting symmetric, non symmetric or irregular geometry is of fundamental necessity for science and technology developments. Applications of objects shape survey is reflected on several science fields as biology, human prosthesis and orthesis, medical diagnosis, prediction of surgical results, orthopedics, veterinary medicine, in
Publicado em: 2008