Telescopic continuum robot for tasks at high positions. / Robô contínuo telescópico para tarefas em alturas elevadas.

AUTOR(ES)
DATA DE PUBLICAÇÃO

2009

RESUMO

Among several applications of robots in the service field, it is possible to percept an increasing interest in manipulate tools in higher positions using automatic devices, due to the fact that such activities are high risked operations and demands the use of several safety equipments. The most common examples of this kind of activity are the inspection of machines, silos, electrical distribution poles, etc. With the aim of apply robots to these activities and increase the safety and efficiency in these operations, as a first step in this work is done the study of different kinds of manipulators. Adopting a classification based on the number of joints, it is possible to separate robots in three different classes: discrete robots, snake-like robots and continuum robots. By analyzing these classes, it is possible to say that continuum robots have more degrees of freedom than the robots of others groups; Compared with the classic discrete robots, continuum robots have simplified mechanisms, simpler control scheme due to the small number of actuators and, in the case of an obstacle, they can contour the obstacle without generating high contact forces. By positioning the actuators out of the robot structure and transferring the motion using cables, i.e., adopting an extrinsic actuation, it is possible to build continuum robots with high electric insulation that is important in applications in which the robot must work near of an electrical distribution network. Despite these advantages, no previous works concerning the use of continuum robots to work in higher positions were found in the literature. Considering the advantages offered by continuum robots, this work proposes a study and application of a continuum robot that uses a more suitable architecture to work in higher positions. Aiming to demonstrate the advantages provided by this architecture, It will be used a case study, in which, the object to be inspected is the wood cross-arms of an electrical poles used in the electrical distribution networks. In a second step, it is done the mechanical project of the robot, where the proposed mechanisms are explained and structural simulations using the finite element method are performed in order to analyze how the structure would react to loads. In a third step, by adopting a strategy of sequential control, it is done the control project. In the last step, with the aim of analyze the robot in practical situation, a prototype is built, which is used to perform the tests.

ASSUNTO(S)

robôs mecanismos robot design continuum robots electric power network inspection telescopic mechanism robótica

ACESSO AO ARTIGO

Documentos Relacionados