Electrical Characterization
Mostrando 1-12 de 248 artigos, teses e dissertações.
-
1. Characterization of Sobradinho landslide in fluvial valley using MASW and ERT methods
Abstract Landslides can substantially impact the fluvial systems, which is why the continuous mapping of their extent, evolution and stability assessment is crucial. However, in such environments, material identification (e.g. colluvium) and subsurface characterization by the methods used for geologic mapping and geotechnical investigation is often a challen
REM, Int. Eng. J.. Publicado em: 2020-12
-
2. The Surface Treatment of Niobium Superconducting Reentrant Cavities by Means of High Temperature Nitrogen Plasma Based Ion Implantation
High Temperature Nitrogen Plasma Based Ion Implantation (HT-NPBII) has been used to treat the surface of niobium superconducting reentrant cavities, which are part of parametric transducers in a resonant-mass gravitational wave detector. The aim is to enhance the corresponding electrical quality factors (Q-factors) which are closely related with the increase
Mat. Res.. Publicado em: 13/12/2019
-
3. Effect of DLC Films with and without Silver Nanoparticles Deposited On Titanium Alloy
Resumo O filme de carbono semelhante a diamante (DLC) é um material de revestimento duro e biocompatível que pode impedir a corrosão com liberação de íons metálicos. Este estudo avaliou as características estruturais do filme de DLC, com e sem nanopartículas de prata (Ag), depositadas por plasma (PECVD) em liga de titânio (Ti-6Al-4V) e formação �
Braz. Dent. J.. Publicado em: 28/11/2019
-
4. Study of Structural and Electric Properties of the PZT 52/48 Doped With Er+3
The scientific community has shown a growing interest in relating to the ferroelectric materials and it has made an effort to develop them. Among these several ferroelectric materials, we proposed to investigated Pb(ZrTi)O3 doped with distinct Er+3 concentrations. Our aim was to investigate how the erbium affects the PZT electrical properties. To determine t
Mat. Res.. Publicado em: 25/11/2019
-
5. Microstructure and Electrical Characterization of Thermoelectric Nanocrystalline Bi2 Te3 Synthesized by Mechanical Alloying
Nanocrystalline bismuth telluride, Bi2Te3 has been synthesized by mechanical alloying (MA) the powder mixture composed of Bi and Te in the inert gas atmosphere within a short duration of 15 min. Microstructure characterization of the prepared powder has been investigated adopting the Rietveld’s method using X-Ray diffraction (XRD) data and analyzing high-r
Mat. Res.. Publicado em: 28/10/2019
-
6. EFFECTS OF SIZE AND SAMPLING GRID ON THE QUALITY OF APPARENT SOIL ELECTRICAL CONDUCTIVITY MAPS
ABSTRACT The apparent soil electrical conductivity (ECa) is an attribute commonly used for the characterization of the spatial variability of soil, but its determination by handheld sensors consumes considerable time and labor. The reduction in the number of sampling points allows minimize them but can result in increased uncertainty of interpolated maps. Th
Eng. Agríc.. Publicado em: 09/09/2019
-
7. Assessing the physiological quality of common bean seeds using the Vigor-S® system and its relation to the accelerated aging test
Resumo: A análise automatizada do vigor de sementes tem se destacado por permitir maior precisão, padronização, objetividade e velocidade na avaliação do potencial fisiológico de lotes de sementes. O presente trabalho teve como objetivo avaliar a eficiência do sistema Vigor-S® na determinação do potencial fisiológico de sementes de feijão comum,
J. Seed Sci.. Publicado em: 01/07/2019
-
8. Microstructure evolution during the extrusion of a 6351 aluminum alloy tube
Abstract The aluminum alloy AA 6351 is a precipitation hardened alloy of the Al-Mg-Si system, additionally containing Mn and Fe. In this study, the microstructural characterization during processing of a thick wall extruded AA 6351 tube was carried out. Several complementary techniques for microstructural characterization were used, such as polarized light o
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
9. Characterization of Algerian kaolins for utilization as a raw material in electrical insulators
Resumo O objetivo desta investigação foi caracterizar três amostras de caulim (DD1, DD2 e DD3) coletadas do depósito de Djebel Debbagh (leste da Argélia) para serem utilizadas em isoladores elétricos de porcelana. Análise granulométrica, fluorescência de raios X, difração de raios X, microscopia eletrônica de varredura e análise térmica (TG-ATD
Cerâmica. Publicado em: 06/06/2019
-
10. Y3+ substituted Sr-hexaferrites: sol-gel synthesis, structural, magnetic and electrical characterization
Resumo Hexaferritas de estrôncio com adição de Y3+ com composição química SrYxFe12-xO19 (x= 0,0, 0,5, 1,0, 1,5) foram sintetizadas com sucesso pelo método sol-gel com autocombustão. Os estudos estruturais e morfológicos das amostras preparadas foram investigados usando a técnica de difração de raios X, espectroscopia de energia dispersiva, micros
Cerâmica. Publicado em: 06/06/2019
-
11. Dielectric and electrical properties of a mullite/glass composite from a kaolinite clay/mica-rich kaolin waste mixture
Resumo Um compósito mulita/fase vítrea foi preparado por sinterização reativa de uma mistura argila caulinítica/resíduo de caulim rico em mica com 25% em massa de resíduo. A composição de fase, microestrutura, propriedades dielétricas e elétricas do compósito sinterizado a 1400 °C foram avaliadas por difração de raios X, microscopia eletrônic
Cerâmica. Publicado em: 2019-01
-
12. Development of a microwave absorbing material based on molybdenum-doped niobium pentoxide
Abstract This work aimed to perform the characterization of electrical properties of niobium pentoxide, Nb2O5, pure and doped with molybdenum, prepared by powder metallurgy route and to do a comparative analysis of the influence of this material when sintered in a muffle or in a microwave oven. The results showed that the doping of the niobium pentoxide with
Cerâmica. Publicado em: 2019-01