Electrical Characterization
Mostrando 13-24 de 248 artigos, teses e dissertações.
-
13. Development and characterization of gas sensors using thin films of polyaniline as active layer
ABSTRACT This work aimed at the development and characterization of gas sensing devices using thin films of polyaniline (PAni) as active layer, deposited by in situ polymerization. The polyaniline, an intrinsically conductive polymer, was used due to its high sensitivity to gases, low response time and stability, ease of synthesis and low cost. The sensor wa
Matéria (Rio J.). Publicado em: 06/12/2018
-
14. Characterization of a pediatric rotary blood pump
Abstract Introduction A ventricular assist device (VAD) is an electromechanical pump used to treat heart failures. For designing the physiological control system for a VAD, one needs a mathematical model and its related parameters. This paper presents a characterization procedure for determining the model parameter values of the electrical, mechanical, and
Res. Biomed. Eng.. Publicado em: 29/11/2018
-
15. PROPIEDADES FISICOQUÍMICAS DE MIELES MONOFLORALES DE ENCENILLO DE LA ZONA ALTOANDINA EN BOYACÁ, COLOMBIA
Honey is the natural product with sweetening properties more widely known, is produced by bees from the nectar of flowers and secretions from the plants. Its physicochemical properties depend on the season of harvest, environmental factors prevailing in the harvest period and the biogeographic zones. The aim of this work was focused in honeys produced by Wei
Quím. Nova. Publicado em: 2017-09
-
16. Multifunctional Nanocomposites between Different Carbon Nanostructures and Styrene Acrylic Latex
This work describes the preparation, characterization and properties study of multifunctional nanocomposites between poly(styrene-co -butyl acrylate) latex and different carbon nanostructures: iron-filled carbon nanotubes (CNT), graphene or graphene oxide. Different approaches were employed to prepare stable aqueous dispersions of these nanostructures, accor
J. Braz. Chem. Soc.. Publicado em: 2017-08
-
17. Mechanisms of Ion Detection for FET-Sensors Using FTO: Role of Cleaning Process, pH Sequence and Electrical Resistivity
The use of FTO samples as an extended gate field effect transistor biosensor is presented. The FTO samples were produced by spray pyrolysis technique. The cleaning process is shown to have a fundamental importance for the final sensitivity of the samples when multiple re-usage is adopted. The role of electrical resistivity and morphology of the films are inv
Mat. Res.. Publicado em: 31/07/2017
-
18. Electrical and microstructural characterization of Gd-doped Ceria/Y-doped Zirconia bi-layer electrolyte prepared by tape casting
ABSTRACT GDC-YSZ bi-layer SOFC electrolytes are an interesting manner to protect GDC electrolytes of the low oxygen partial pressure present at anode-electrolyte interface. This oxygen partial pressure condition and high temperatures during the operation of SOFC permit GDC electrolyte reduction injuring the performance of SOFC. In this work, GDC-YSZ bi-layer
Matéria (Rio J.). Publicado em: 22/05/2017
-
19. Physical Vapor Deposited Films of a Perylene Derivative: Supramolecular Arrangement and Thermal Stability
The analysis of supramolecular arrangement is essential to understand the role of this key factor on the optical and electrical properties of organic thin films. In this work, thin solid films of bis(phenethylimido) perylene (PhPTCD) fabricated using physical vapor deposition (PVD) technique (thermal evaporation), deposited simultaneously onto different subs
Mat. Res.. Publicado em: 23/03/2017
-
20. Emission Properties Related to Distinct Phases of Sol-Gel Dip-Coating Titanium Dioxide, and Carrier Photo-Excitation in Different Energy Ranges
Titanium dioxide (TiO2) in the form of pellets (pressed powder) and thin films are investigated, revealing the presence of distinct phases: mainly anatase and rutile. Characterization of optical, structural and electrical properties were carried out on samples submitted to different sort of thermal annealing (TA), at distinct temperatures, 500 and 1000ºC, d
Mat. Res.. Publicado em: 20/03/2017
-
21. Electromagnetic Characterization of Aircraft Composite Materials and its Effects on the Antenna Performance
Abstract This paper presents an electromagnetic characterization of aircraft composite materials, as well as numerical and experimental analyses of its effects on the antenna performance. Two uncalibrated S-parameters characterization methods have been applied for retrieving the complex electrical permittivity in the L- and C-band, namely: Air-region method
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-03
-
22. Spatial soil sampling design using apparent soil electrical conductivity measurements
ABSTRACT Soil sampling is an important stage of digital soil mapping. The objective of this study was to characterize the spatial design of soil sampling using soil apparent electrical conductivity (ECa) and its optimized spatial sampling. For the characterization, it was used the Spatial Simulated Annealing (SSA) technique, incorporated on the software SANO
Bragantia. Publicado em: 29/09/2016
-
23. Geophysical modeling in gold deposit through DC Resistivity and Induced Polarization methods
Abstract Ore mining fundamentally depends on the definition of its tenor and volume, something extremely complex in disseminated mineralization, as in the case of certain types of deposits of gold and sulfites. This article proposes the use of electrical tomography for definition of a geophysical signature in terms of electrical resistivity and chargeability
REM, Int. Eng. J.. Publicado em: 2016-09
-
24. The Effect of Co and Zn Addition on Densification and Electrical Properties of Ceria-Based Nanopowders
Abstract In this work, cobalt and zinc-doped Ce0.8Gd0.2O1.9 samples were prepared starting from a commercial nanopowder and compared to the undoped material. The powder samples were pressed and afterwards sintered by a two-step procedure, before characterization by X-Ray Diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning Electron Microscopy
Mat. Res.. Publicado em: 11/08/2016