Corrosion Propagation
Mostrando 1-12 de 15 artigos, teses e dissertações.
-
1. Effect of Ca Content on Properties of Extruded Mg-3Zn-0.5Sr-xCa Alloys for Medical Applications
Mg-3Zn-0.5Sr-xCa(wt.%) (x=0, 0.2, 0.5) alloys were fabricated by casting and hot extrusion. X-ray diffraction (XRD) and optical microscopy observation showed that the microstructure of Mg-3Zn-0.5Sr-xCa alloys was composed of α-Mg matrix and Mg17Sr2 phase precipitated along grain boundaries. The tensile strength of the alloy increased from 255MPa to 305MPa w
Mat. Res.. Publicado em: 30/09/2019
-
2. Aço carbono 1040 como indicador de agressividade do solo e da pasta de cimento em sistemas de ancoragem de linhas de transmissão
RESUMO O encapsulamento de hastes de âncora em pasta de cimento reduz o contato dos materiais metálicos com os ambientes agressivos, em torres estaiadas de linhas de transmissão de energia elétrica. Contudo, ainda são reportados casos de falha prematura devido à corrosão do sistema de ancoragem. O íon cloreto é considerado um dos principais respons�
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Detecção de corrosão em concreto armado com termografia infravermelha e ultrassom
Resumo A corrosão do aço é uma das principais manifestações patológicas em concreto armado. Sua detecção precoce pode evitar tanto custosos reparos quanto danos aos usuários. Este artigo propõe o uso da termografia infravermelha e do ultrassom para a detecção de corrosão em concreto armado. A metodologia consistiu na elaboração de 6 corpos de
Ambient. constr.. Publicado em: 10/06/2019
-
4. Investigation of Stress Corrosion Cracking of Austenitic, Duplex and Super Duplex Stainless Steels under Drop Evaporation Test using Synthetic Seawater
Abstract Stress corrosion cracking (SCC) of UNS S31603 austenitic stainless steel (ASS), UNS S32205 duplex stainless steel (DSS) and UNS S32750 super duplex stainless steel (SDSS) was investigated. SCC tests were carried out at 110 ºC for 500 h under drops of synthetic seawater (DET, drop evaporation test). Two loading conditions were investigated: 50 % and
Mat. Res.. Publicado em: 31/01/2019
-
5. A Comparative Investigation of the Corrosion Resistance and HIC Suceptibility of API 5L X65 and API 5L X80 Steels
High strength low alloy (HSLA) steels are used for the construction of pipelines for oil and natural gas transportation. For such applications pipelines must exhibit mechanical resistance and resistance to corrosion and hydrogen induced cracking (HIC). API 5L X65 steels are the main materials used for this purpose. However, for economic reasons, the use of s
Mat. Res.. Publicado em: 07/01/2019
-
6. Controlled Pre-Corrosion Attack and Ultrasonic Fatigue Endurance of Titanium Alloy Ti-6Al-4V
Abstract Ultrasonic fatigue tests were carried out on titanium alloy Ti-6Al-4V on the base material and the pre-corroded specimen to assess the pre-corrosion effect on the fatigue life of this alloy. The pre-corrosion was obtained by immersion of specimens in an acid solution: hydrochloric acid with 1.4 of pH during 8 and 16 minutes. All ultrasonic fatigue t
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
7. Estudo da corrosão e corrosão-fadiga em ligas de Al e Al - Li de alta resistência para aplicação aeronáutica / Study behaviour of corrosion and corrosion fatigue in high strength Al and Al - Li alloys for aeronautic application
The aircraft industry is constantly looking for improved materials which offer benefits in terms of performance, weight and cost savings. Corrosion and fatigue of aluminium alloys are major issues in the service life assessment of aircraft structures and in the management of aging air fleets. The aim of this study was to evaluate the corrosion and corrosion
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/09/2012
-
8. Estudo do comportamento mecânico da liga alumínio cobre 2024 solubilizada e envelhecida para aplicações aeronáuticas
Aluminum alloys present low specific density, good strength, and high corrosion resistance under common environments. Aluminum-Copper 2024 alloy is one of the most widely used alloy in aircraft fuselage structures due to its good mechanical properties. The microstructure of the alloy was observed by optical microscopy showing elongated grains caused from the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/08/2011
-
9. Fabrication and characterization of tellurite and germanate waveguides for optoelectronics applications. / Produção e caracterização de guias de onda de telureto e germanato para aplicações em optoeletrônica.
The objective of this work is the production and characterization of GeO2-PbO and TeO2-ZnO waveguides. The waveguides were produced using thin films and glasses by means of different procedures. The films were produced using the RF magnetron sputtering method and characterized by a variety of techniques. In particular, scanning electron microscopy was essent
Publicado em: 2010
-
10. Environmentally induced cracking of API grade steel in near-neutral pH soil
Environmentally induced cracking of pipeline steels in contact with soil have been investigated. Different soils were prepared in order to determine their physical, chemical and bacteriological characteristics. Slow strain rate testing was carried out by using electrolytes obtained from soil samples and NS4 standard solution. Stress vs. strain curves of API
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-06
-
11. Avaliação experimental e modelagem dos efeitos estruturais da propagação da corrosão em elementos de concreto armado
O concreto armado era tido, quando da sua concepção inicial, como um material que teria boa durabilidade e uma vida útil elevada, praticamente dispensando reparos. Com a intensificação de seu uso, todavia, começaram a serem observados diversos processos de deterioração que resultaram, nos casos mais críticos, em severos comprometimentos de desempenh
Publicado em: 2007
-
12. APPLICATION OF FINITE ELEMENT METHOD IN THE ANALYSIS OF FILED VARIATIONS IN COAXIAL STRUCTURES DUE TO PERTURBATION IN THE BOUNDARY CONDITIONS / APLICAÇÃO DE MÉTODO DE ELEMENTOS FINITOS NA ANÁLISE DE VARIAÇÕES DE CAMPO EM ESTRUTURAS COAXIAIS DEVIDO A PERTURBAÇÕES NAS CONDIÇÕES DE CONTORNO
In this work, the Finite Element Method (FEM) is applied in the analysis of electromagnetic field generated by instruments employed for inspection of pipelines for natural gas-transmission. Inspection instruments can use this method to evaluate anomalies as corrosion and kneading in the superficies of the pipelines. This can avoid leaking that can cause ecol
Publicado em: 2007