Basalt
Mostrando 1-12 de 86 artigos, teses e dissertações.
-
1. Pressed roofing tile based on cementitious material and basalt powder: Technological and toxicological characterization
Abstract This study aims to develop a pressed concrete roofing tile from powder technology containing basalt powder in substitution of fine sand (aggregate) for application in building covers. Specimens were submitted to technological and toxicological characterization. Hence, pressed specimens based on cement and basalt powder were analyzed. In the bending
REM - International Engineering Journal. Publicado em: 2022
-
2. Influence of the physical characteristics of sand and the crushed filler content on the properties of self-leveling mortars
Abstract The properties of self-leveling mortars (SLMs) in the fresh and hardened state are strongly affected by their formulation. In this study, the influence of three different quartz sands (different physical characteristics) was investigated in SLMs, as well as the replacement of these sands by crushed basalt filler. The tests performed were: spreading,
Cerâmica. Publicado em: 2021-06
-
3. Integrated use of sewage sludge and basalt mine waste as soil substitute for environmental restoration
Abstract If not managed properly, mining waste can be detrimental to the environment. In addition, sewage treatment plants produce sludge, a biowaste rich in organic matter which is often sent to landfills. The present study evaluated the use of sewage sludge as an amendment for mine waste from a basalt quarry as an alternative to the use of soil from borrow
REM, Int. Eng. J.. Publicado em: 2020-06
-
4. Constraints from magnetotellurics on the geological structure across a seismic area associated with water wells in the Paraná basin, Brazil
ABSTRACT: The occurrence of earthquakes associated with the opening of groundwater wells is a very rare phenomenon. We present the results from a magnetotelluric profile of about 4 km-long that crosses a seismic zone near the town of Bebedouro, in the Northeastern part of the intra-cratonic Paraná basin, in Brazil. The seismic activity is thought to be caus
Braz. J. Geol.. Publicado em: 13/01/2020
-
5. Bond strength evaluation between textiles reinforced mortar with carbon nanotubes and concrete substrate
Abstract The influence of using carbon nanotubes to improve bond strength between textiles reinforced mortar and concrete was investigated. Forty-two specimens were tested using double-shear test to evaluate the effect of various parameters such as CNTs addition, type of textile material, bond length and width, and number of TRM layers on the bond behavior.
Lat. Am. j. solids struct.. Publicado em: 25/11/2019
-
6. Effect of moringa and bagasse ash filler particles on basalt/epoxy composites
Abstract This study evaluated the effect of moringa and nano ash filler particles on mechanical, chemical corrosion and moisture absorption of basalt fiber/epoxy composites. Epoxy resin and Araldite HY951 hardener was used as matrix along with the inclusion of filler particles while the bi-directional woven basalt fiber mat was used as the reinforcement in f
Polímeros. Publicado em: 09/09/2019
-
7. Influence of the moisture content on the dynamic modulus of elasticity of concrete made with recycled aggregate
Resumo O comportamento elástico do concreto é estimado a partir de sua resistência a compressão ou determinado por ensaios estáticos ou dinâmicos. Como a maioria das normas não consideram o teor de umidade interna do concreto e desconsideram o uso de agregados reciclados ao propor equações para a estimativa do módulo de elasticidade, é frequente s
Ambient. constr.. Publicado em: 2019-04
-
8. Genesis and Classification of Nitisols from Volcano-Sedimentary Lithology in Northeastern Brazil
ABSTRACT On the southern coast of Pernambuco State (PE), Brazil, lithotypes of the Cabo Basin (volcanic and sedimentary rocks), in association with the relief, allow the determination of the dynamics of the formation of Nitossolos Háplicos (Nitisols), including those with high levels of exchangeable aluminum. The objective of this study was to evaluate the
Rev. Bras. Ciênc. Solo. Publicado em: 14/02/2019
-
9. Mechanical Properties and Abrasive Wear of Different Weight Percentage of TiC Filled Basalt Fabric Reinforced Epoxy Composites
Fiber reinforced polymers are very rarely applied as wear-resistant materials because of the lack of good mechanical strength, which adversely affects the properties of the composites. To improve the mechanical and abrasive wear resistant of the composites, fillers are incorporated into the polymers. Hence in this work composites are produced by adding funct
Mat. Res.. Publicado em: 14/01/2019
-
10. Multinomial Logistic Regression and Random Forest Classifiers in Digital Mapping of Soil Classes in Western Haiti
ABSTRACT Digital soil mapping (DSM) has been increasingly used to provide quick and accurate spatial information to support decision-makers in agricultural and environmental planning programs. In this study, we used a DSM approach to map soils in western Haiti and compare the performance of the Multinomial Logistic Regression (MLR) with Random Forest (RF) to
Rev. Bras. Ciênc. Solo. Publicado em: 02/07/2018
-
11. Geochemistry of the Northern Paraná Continental Flood Basalt (PCFB) Province: implications for regional chemostratigraphy
ABSTRACT: The Paraná Continental Flood Basalt (PCFB) province is one of the largest igneous provinces on Earth, but little is known about the architecture and geochemical characteristics of the lava flows. In this context, a set of borehole samples arranged in an NEE-SWW profile - more than 600 km long - located in the northern PCFB was used to define its c
Braz. J. Geol.. Publicado em: 2018-06
-
12. Geochemistry of basaltic flows from a basalt ring structure of the Serra Geral formation at Água Vermelha dam, Triângulo Mineiro, Brazil: implications for the magmatic evolution of the Paraná-Etendeka Province
ABSTRACT: The Serra Geral Formation belongs to the Paraná-Etendeka Magmatic Province (PEMP) and its geochemical and petrographic characteristics are not homogeneous. Many studies segment this group into six basaltic and two rhyolitic magma-types. It is believed that its extrusion occurred through crustal fissures in the Cretaceous, but some authors describe
Braz. J. Geol.. Publicado em: 2018-06