Influence of the moisture content on the dynamic modulus of elasticity of concrete made with recycled aggregate
AUTOR(ES)
Kazmierczak, Claudio de Souza
FONTE
Ambient. constr.
DATA DE PUBLICAÇÃO
2019-04
RESUMO
Resumo O comportamento elástico do concreto é estimado a partir de sua resistência a compressão ou determinado por ensaios estáticos ou dinâmicos. Como a maioria das normas não consideram o teor de umidade interna do concreto e desconsideram o uso de agregados reciclados ao propor equações para a estimativa do módulo de elasticidade, é frequente se observar divergências entre os valores determinados. Nesse trabalho, a influência da umidade do exemplar e do uso de agregados reciclados no módulo de elasticidade dinâmico são avaliadas. Foram utilizados um agregado basaltico e dois agregados provenientes da cominuição de concreto, sendo produzidos concretos com resistência entre 25 MPa e 55 MPa. Os módulos de elasticidade dinâmicos dos exemplares foram determinados nos estados saturado e seco, variando entre 26 GPa e 46 GPa. Conclui-se que há sensíveis diferenças de módulo de elasticidade dinâmico entre o concreto seco e saturado e em função do tipo de agregado utilizado, sendo imprescindível que esses fatores sejam considerados nas equações propostas pelas normas para a estimativa do módulo de elasticidade.Abstract The elastic behavior of the concrete is estimated from its strength or determined by static or dynamic tests. However, because the codes of practice do not standardize the internal moisture content of the concrete and disregard the use of recycled aggregates when proposing equations for the estimation of the modulus of elasticity, discrepancies between the values measured and estimated are frequent. The influence of the moisture content of concrete containing basaltic coarse aggregates and coarse recycled concrete aggregate in the dynamic modulus of elasticity is discussed in this paper. A basalt coarse aggregate and two recycled coarse aggregates where used. For each type of coarse aggregate, concrete with compression strength between 25 MPa and 55 MPa were produced. The dynamic modulus of elasticity of the saturated samples were determined and range from 26 GPa to 46 GPa. There is a significant difference in the value of the dynamic modulus of elasticity for dry concrete versus saturated concrete, also influenced by the type of aggregate. Estimations of the modulus of elasticity from the compressive strength equations proposed by the codes of practice must be improved considering its characteristics.
Documentos Relacionados
- Influence of wood moisture content on the modulus of elasticity in compression parallel to the grain
- Effects of pre-wetting aggregate on the properties of mortars made with recycled concrete and lightweight aggregates
- Properties of high-workability concrete with recycled concrete aggregate
- Dynamic compressive behavior of recycled aggregate concrete based on split Hopkinson pressure bar tests
- Experimental investigation on the effects of recycled aggregate on fracture behavior of polymer concrete