Ballistic
Mostrando 1-12 de 100 artigos, teses e dissertações.
-
1. Evaluation of the Projectile's loss of Energy in Polyester Composite Reinforced with Fique Fiber and Fabric
Firearms threat has always been a matter of personal concern, especially to soldiers in armed conflicts as well as police officers and civilians involved with public security. A multilayered armor system (MAS) is intended to personal protection against high kinetic energy ammunition, such as that used in rifles. MAS layers are normally composed of a front ce
Mat. Res.. Publicado em: 21/10/2019
-
2. Ballistic Behavior of New Alumina Composites Reinforced with Niobo-Phosphate Glass
This work aimed to produce and evaluate the ballistic behavior of niobo-phosphate glass-doped alumina composites. The niobo-phosphate glass (30% Nb2O5- 30% P2O5- 20% CaO - 20% CaF2, by mol) were added to the alumina in six different weight percentages. The composite with the highest densification, measured by the Archimedes assay, was used for the ballistic
Mat. Res.. Publicado em: 23/09/2019
-
3. Aço de alta dureza para aplicação balística: propriedades mecânicas
RESUMO Blindagens balísticas são projetadas a resistir determinadas ameaças, que dependem da aplicação. Estas ameaças podem ser geradas por projéteis de armas de fogo ou estilhaços provenientes de explosões com diferentes energias cinéticas. Os materiais normalmente utilizados para este propósito são metálicos, não metálicos e compósitos, sen
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Ballistic Tests of Alumina-UHMWPE Composites Submitted to Gamma Radiation
The energy absorption in ballistic tests of alumina-ultra high molecular weight polyethylene (UHMWPE) composites with 60, 80 and 90 wt% alumina submitted to gamma radiation doses of 25, 50 and 75 kGy was investigated. The ballistic tests were carried out at subsonic speed using a compressed air system. The results showed that the composite with 80% alumina i
Mat. Res.. Publicado em: 22/08/2019
-
5. Guaruman: a Natural Amazonian Fiber with Potential for Polymer Composite Reinforcement
The Amazonian region of South America is known for its diversified number of plants from which food, medicine, wood and fibers have, since long time, been produced by local natives. A typical example is the guarumã (“guaruman”as suggested English spelling) scientifically identified as Ischinosiphon koem, an abundant plant found in the low lands alongsid
Mat. Res.. Publicado em: 12/08/2019
-
6. Dissipation and mass redistribution as a mechanism of propulsion in closed systems
Abstract In this work, the mechanism behind motion in closed systems is investigated by studying two simple mechanical systems. Firstly, a simple “ballistic” car system introduces the subject of propulsion as a function of a parameter that modulates the amount of ejected mass, thus allowing a transition between a closed to an open system. The second exam
Rev. Bras. Ensino Fís.. Publicado em: 01/07/2019
-
7. Desempenho balístico de estruturas multicamadas à base de alumina/epóxi
Resumo Alumina é comumente utilizada em blindagens compostas. Apresenta baixa tenacidade à fratura e esta propriedade está relacionada à resistência a múltiplos disparos. Com o intuito de melhorar a durabilidade em campo uma alternativa seria utilizar cerâmicas multicamadas. Neste estudo foi avaliado o desempenho balístico de estruturas multicamadas
Cerâmica. Publicado em: 06/06/2019
-
8. Natural ageing of polyaramide fiber from ballistic armor
Abstract Ballistic armor has been manufactured primarily based on polyaramide (Kevlar and Twaron) or Dyneema but the lifespan warranty in Brazil is only 5 years and after this time period they are incinerated or comminuted and ground up. This study aims to evaluate the changes on the physical, mechanical and morphological properties of polyaramide fibers of
Polímeros. Publicado em: 18/03/2019
-
9. Experimental study of brass properties through perforation tests using a thermal chamber for elevated temperatures
Abstract Experimental analysis on standard brass alloy has been carried out using a high pressure gas gun. Perforation tests have been performed for a variety of impact velocities from 40 to 120 m/s in order to study the material behaviour and to define failure modes. The main aim of the study has been to provide results using an innovative thermal chamber t
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
10. Numerical Study On Multi Layered Target Material Subjected To Impact Loading
Abstract In this study, the glass/epoxy composite laminate is layered with polyurethane foam/ polyurethane sheet and silicon carbide to analyse their response during high mass and low velocity impact. The silicon carbide is layered in two forms, one is as plate and the other is as inserts. The target materials are prepared in various combinations and the bo
Lat. Am. j. solids struct.. Publicado em: 04/06/2018
-
11. Ballistic Efficiency of Multilayered Armor Systems with Sisal Fiber Polyester Composites
The urban violence and the different types of global armed conflicts demand efficient protective systems against high energy ammunition. Multilayered Armor Systems (MAS) provide efficient protection by making use of lighter and more efficient materials. A typical MAS may be composed of three layers: a front ceramic followed by a composite, backed by a ductil
Mat. Res.. Publicado em: 15/01/2018
-
12. The Effect of Thickness on Aramid Fabric Laminates Subjected to 7.62 MM Ammunition Ballistic Impact
Due to increasing improvement of weaponry and ammunition, attention is being given to the development of new materials that could more effectively resist to ballistic impact. In order to stop high energy bullets, with speed above 800 m/s, a high strength material is necessary. However, if just one material is used, then a relatively thick piece is required,
Mat. Res.. Publicado em: 21/11/2017