Xrd
Mostrando 25-36 de 1256 artigos, teses e dissertações.
-
25. Caracterização de solos utilizados em indústrias cerâmicas e análise da visibilidade de uso em tijolos ecológicos
Resumo Neste estudo, objetivamos caracterizar solos de três depósitos sedimentares utilizados como fontes de matéria-prima para indústrias de cerâmica localizadas no semiárido brasileiro. As amostras foram coletadas em depósitos localizados nos municípios de Barra de São Miguel, Juazeirinho e Santa Cecília, nomeadas, preparadas e submetidas a teste
Ambient. constr.. Publicado em: 2021-10
-
26. Effects of the addition of graphene on the compressive strength of geopolymeric mortar developed from k-feldspar mining waste
Abstract Contemporary organizations are showing a growing interest in the reuse of solid waste from industrial processes with the intention of reducing environmental impacts and reducing costs. The mining activity is one of the main waste generators in Brazil. In parallel, geopolymeric materials have been gaining prominence in studies that make it a possible
REM, Int. Eng. J.. Publicado em: 2021-09
-
27. Magnetized Biochar as a Gold Nanocatalyst Support for p-Nitrophenol Reduction
The biomass use is of considerable ecological and economical interest and here, biochar, a by-product of biomass carbonization, is magnetized with Fe3O4 for its use as gold nanoparticle (NP) support towards catalysis of p-nitrophenol (4-NP) reduction. Biochar was synthesized from coffee straw biomass via pyrolysis, while magnetite functionalization was obtai
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
28. Preparation of SAPO-34-Based Catalyst for Conversion of Fructose to 5-Hydroxymethylfurfural
Solid acid-catalyzed dehydration of fructose to produce 5-hydroxymethylfurfural (5-HMF) has been a hotspot in biomass conversion research in recent years. In this study, a novel SAPO-34-based catalyst was prepared by consecutive steps of titanium doping, sulfuric acid impregnation, and sulfonic acid functionalization. Characterization of the catalyst with X-
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
29. A Comparison of the Photolytic and Photocatalytic Degradation of Triclosan: Identification of Transformation Products and Ecotoxicity Evaluation
Triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol) is commonly used as an antibacterial agent in various industrial products and is often detected in wastewater effluent. Comparison was made for triclosan degradation by photolysis and TiO2 photocatalysis (under UV irradiation (125 W)) based on analysis of transformation products, together with ecotoxicity ev
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
30. Expansibility of vermiculite (Santa Luzia, Brazil) irradiated with microwave
Abstract The effect of microwave heating on the expansion of vermiculite was studied at a level of 700 W for 4 min exposure time and compared with raw vermiculite. In this study, the characterization of vermiculite from a mine in the northeast region of Brazil was performed using thermogravimetry, N2-adsorption, cation exchange capacity, X-ray powder diffrac
Cerâmica. Publicado em: 2021-06
-
31. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
32. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
33. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
34. Liquid Phase Nitration of Benzene Catalyzed by a Novel Salt of Molybdovanadophosphoric Heteropolyacid
A highly efficient and reusable catalyst QA-HPMV was successfully prepared by the reaction of quinoline-2-formic acid (QA) with molybdovanadophosphoric heteropolyacid (H4PMo11VO40, HPMV) for the nitration of benzene. The physical and chemical properties of the sample was characterized by X-ray diffraction analysis (XRD), Fourier transform infrared spectrosco
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
35. Effect of pH level and calcination on the production of calcium phosphates by acidic route of wet precipitation
Abstract Multiphasic calcium phosphate powders were synthesized by the acidic route, using lactic acid as a chelating agent that allows the production of a stable and rich solution of calcium and phosphate ions at room temperature. After pH adjusting, without varying the concentrations of precursor solution, XRD and FTIR analyses showed different CaP phases
Cerâmica. Publicado em: 2021-06
-
36. Microbial activity and studies on excavated megalithic micaceous potsherds from Peninsular India
Abstract The abundantly available mica flakes were added in raw materials to manufacture pottery in Central Peninsular India during the early Iron Age (700-300 BCE) for storage and glittering. The micaceous potsherds from the excavated megalithic site of Nagpur were studied for their composition, manufacturing techniques, microstructural features, microbial
Cerâmica. Publicado em: 2021-06