X Ray Microanalysis
Mostrando 1-12 de 123 artigos, teses e dissertações.
-
1. Characterization of micaceous minerals occurring in phosphate ores in Brazil: emphasis on the interstratified phyllosilicates
Abstract Micaceous minerals were characterized in three phosphatic ores from mines in Western Minas Gerais State, Brazil, all having complex chemical and mineralogical compositions, with emphasis on interstratified phyllosilicates. Knowledge of the relationship between the physical and chemical characteristics of the phyllosilicates contributed to a better u
REM - International Engineering Journal. Publicado em: 2022
-
2. Dolomite-zirconia reaction sintered bonded coarse magnesia ceramics: effect of the bonding proportion
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Cerâmica. Publicado em: 2021-06
-
3. Editorial Comment: Luts-V: A new simplified score for assessing lower urinary tract symptoms in men
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
4. Oxidative Stress & Male Infertility - A necessary and conflicted indissociable marriage: How and when to call for evaluation?
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
5. Editorial Comment: Vasectomy re-reversal: effectiveness and parameters associated with its success
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
6. Dysplasia of the fibrous sheath with axonemal and centriolar defects combined with lack of mitochondrial activity as associated factors of ICSI failure in primary ciliary dyskinesia syndrome
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
7. Caracterização de termistores automotivos do tipo NTC
RESUMO Os termistores automotivos são eletrocerâmicas com características sensoras alojadas em estojos metálicos fixadas no radiador, que têm como função controlar a temperatura da água de resfriamento do motor. O objetivo deste trabalho foi caracterizar dois termistores comerciais aplicados em veículos automotores. Os termistores caracterizados for
Matéria (Rio J.). Publicado em: 25/11/2019
-
8. Microstructural, thermochemistry and mechanical evaluation of self-reducing pellets using electric arc furnace (EAF) dust containing zinc for Waelz process
ABSTRACT The increment of recycling of steel using electric arc furnace and the tendency to coat of steel products with zinc, in order to prevent corrosion, has increased the proportion of galvanized scrap used worldwide in the recent years. Approximately 10 to 20 Kg/t of cast steel is generated in casting arcs. These collected dusts electric arc furnace (EA
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Diagrama de fases experimental Fe-Sn-Zr. Nuevos resultados del corte isotérmico de 800 °C
ABSTRACT The Zr-based alloys are extensively applied in the field of nuclear technology. Alloyed with Sn and Fe, Zr is the main element in the zircaloy-type alloys, currently vastly used as structural elements and as containers of burnable elements in nuclear reactors. This ternary metallurgical system is also a component of more recently developed alloys su
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Fabricación de recubrimientos compuestos de Bioglass®/poli(ɛ-capro-lactona) obtenidos por co-deposición electroforética sobre acero inoxidable
ABSTRACT In this work two kinds of "soft coatings" were obtained by co-electrophoretic deposition technique (co-EPD). In all cases a bioglass was used as inorganic phase, and a commercial poly(ɛ-caprolactone), (PCLC), and an anionic synthesized PCL modified with maleic anhydride (PCLS) were used as organic phase. To ensure an adequate coating over the metal
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Fases identificables en la zona de interacción de placas combustibles dispersas U3Si2/Al
ABSTRACT Fuel elements based on U3Si2 particles dispersed in a pure Al matrix (known as dispersion fuel element) are known to be very stable under irradiation, in plate type configurations. For this reason, they were or are being used to convert to low enriched uranium a large number of research reactors without significant loss in performance. According to
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Identification of Heavy Metals in Crystals of Sand and Silt Fractions of Soils by Scanning Electron Microscopy (SEM EDS/WD-EPMA)
ABSTRACT Studies of heavy metals are concentrate on clay fractions, but coarser fractions of the soil can constitute significant sources of structural forms of heavy metals. The aim of this study was to evaluate the occurrence of heavy metals in the structure of minerals of the sand and silt fractions of soils from three different parent materials (metamorph
Rev. Bras. Ciênc. Solo. Publicado em: 08/03/2018