Wood Production
Mostrando 1-12 de 381 artigos, teses e dissertações.
-
1. Study for the incorporation of wood ash in soil-cement brick
Abstract This study aimed to produce soil-cement brick with wood ash incorporation coming from the textile industry. The wood ash was a partial substitute for soil and cement in the manufacture of bricks. 7 formulations were made with different proportions of substitution: 10%, 20%, and 30%. It was noticed that the substitution of cement by wood ash in 10% r
Cerâmica. Publicado em: 2022
-
2. Production of mahogany particleboards using branches and wood residues
Resumo A madeira de mogno (Swietenia macrophylla King) é uma das mais valiosas encontradas no Continente Americano. Esse trabalho visou avaliar a produção de painéis de partículas de resíduos dos galhos e troncos dessa espécie. Foram avaliados a viabilidade de produção, as propriedades físicas e mecânicas e, além disso, foi realizada a comparaç�
Ambiente Construído. Publicado em: 2022
-
3. Production of kraft pulp from Ochroma pyramidale wood
RESUMO O Brasil se destaca no cenário internacional em relação a produção de celulose de fibra curta. Apesar da grande biodiversidade brasileira, essa produção está baseada em clones de espécies exóticas de Eucalyptus. Nesse contexto, pode haver grande potencial na avaliação de novas fontes de fibras da flora brasileira, incluindo a região amaz�
Acta Amazonica. Publicado em: 2022
-
4. Growth of pitaya seedlings according to the type of substrate and the frequency of irrigation
ABSTRACT The objective of this study was to evaluate the development of pitaya cuttings in different substrates under different frequencies of irrigation. The experiment was conducted from January to May 2017 in a greenhouse at Universidade Federal Rural da Amazônia, Capitao Poço, Pará, Brazil. A completely randomized 3 × 7 factorial design with four rep
Rev. Ceres. Publicado em: 2021-08
-
5. USE OF RESIDUES FROM THE CELLULOSE INDUSTRY AND SUGARCANE BAGASSE IN PARTICLEBOARDS
ABSTRACT The use of alternative materials such as lignocellulosic residues in the production of particleboards has increased considering that these residues are produced in large volumes and often do not have an appropriate destination. This research studied the use of residues from cellulose industries, sugarcane bagasse, and castor oil-based polyurethane r
Eng. Agríc.. Publicado em: 2021-02
-
6. Performance of crisphead lettuce cultivars under protected environment in different times of production
ABSTRACT The objective of this work was to evaluate the behavior of Crisphead lettuce as a function of production seasons under different forms of protected environment. Two experiments were carried out in the field at different times: September to December 2017 and June to August 2018, in a randomizaed blocks desing, in a 4 x 7 factorial scheme, the first o
Rev. Ceres. Publicado em: 2020-08
-
7. WOOD RESOURCE BALANCE FOR PLANTATION FORESTS IN BRAZIL: RESOURCES, CONSUMPTION AND CASCADING USE
ABSTRACT A resource balance comprises a method to monitor sources and uses of a given material. The wood resource balance analyses origins of wood resources used in the production of semi finished forest products. At the same time, the resource balance helps tracking wood processing residues and its further uses. A primary survey with 113 companies was condu
CERNE. Publicado em: 2020-06
-
8. PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD FROM Eucalyptus grandis PRODUCED BY UREA FORMALDEHYDE RESIN WITH SiO2 NANOPARTICLES
ABSTRACT The use of nanoparticles appears to be a feasible option for improving the quality of a range of wood-based products. Studies show that they can improve both the physical and mechanical properties of wood and wood-based products. This preliminary study aimed to analyze the influence of SiO2 nanoparticles on the physical and mechanical properties of
Eng. Agríc.. Publicado em: 2020-06
-
9. VEGETATIVE PROPAGATION OF Cordia trichotoma (VELL.) ARRAB. EX STEUD. BY CUTTINGS FROM SHOOTS AND ROOTS
ABSTRACT Cordia (Cordia trichotoma (Vell.) Arrab. ex Steud.) is a native species that has high quality wood and potential for the establishment of commercial plantations. However, its propagation by seeds is difficult, and vegetative propagation is a good alternative. The aim of this study was to evaluate the vegetative propagation of cordia by cuttings from
CERNE. Publicado em: 2020-06
-
10. STUDYING THE GRAMMAGE IN LVL PANELS GLUED WITH CASTOR OIL-BASED POLYURETHANE ADHESIVE: A POSSIBLE ALTERNATIVE TO FORMALDEHYDE RELEASING ADHESIVES.
ABSTRACT Efforts have been done in order to decrease the human dependence on petroleum materials. This idea can be applied for wood adhesives and wood products. This study proposes to evaluate laminated veneer lumber (LVL) panels of Hevea brasiliensis produced with castor oil-based polyurethane and resorcinol formaldehyde in different grammages. Six rubber t
CERNE. Publicado em: 2020-03
-
11. PHYSICAL AND THERMAL PROPERTIES OF EUCALYPTUS WOOD CHARCOAL.
ABSTRACT The knowledge of the physical and thermal properties of eucalyptus charcoal is of fundamental importance in the design of equipment and development of cooling technologies. However, literature about physical properties for eucalyptus wood charcoal is largely unavailable, especially the thermal and aerodynamic properties, for the same material. The a
CERNE. Publicado em: 2020-03
-
12. APPLICATIONS OF SAR DATA TO ESTIMATE FOREST BIOPHYSICAL VARIABLES IN BRAZIL
ABSTRACT The use of SAR images has been highlighted in scientific research focused on forest data collection worldwide. Thus, the present work aimed at gathering studies turned to the application of SAR images to obtain biophysical variables of forests in Brazil. Based on studies published in recognized databases, a growing amount of publications over time
CERNE. Publicado em: 2020-03