Wood Physical Properties
Mostrando 1-12 de 128 artigos, teses e dissertações.
-
1. Evaluation of moisture content variation on strength and stiffness properties of Cedrella sp. wood specie
Abstract In order to evaluate the influence of moisture content on wood physical and mechanical properties, the present research analyzed the influence of moisture content variation on Cedrella sp. on 12 strength and stiffness properties, considering 12% moisture content up to Fiber Saturation Point (FSP) were considered. Brazilian Standard consider a correc
REM - International Engineering Journal. Publicado em: 2022
-
2. Effects of termal treatment on the physical properties of Buchenavia sp. (branquilho) wood
Resumo Objetivou-se avaliar o efeito do tratamento térmico nas propriedades físicas da madeira de Buchenavia sp. Os tratamentos térmicos foram feitos em temperaturas de 180 °C e 200 °C durante 2 h. Avaliou-se a densidade aparente (AD), densidade básica (BD), porosidade (Ф), perda de massa, contração longitudinal (LS), radial (RS), tangencial (TS) e
Ambiente Construído. Publicado em: 2022
-
3. Effect of stem height in variation of bark, heartwood, sapwood and physical properties of wood in Dipteryx panamensis Pittier in a provenance/progeny test
RESUMO A madeira de Dipteryx panamensis é usada no reflorestamento na Costa Rica, tendo um programa de melhoramento genético iniciado recentemente no país. O objetivo do presente estudo foi estudar o efeito da altura do tronco das árvores na variação de casca, alburno, cerne, densidade verde (GD), densidade básica (SG) e teor de umidade na condição
Ciência Florestal. Publicado em: 2022
-
4. USE OF RESIDUES FROM THE CELLULOSE INDUSTRY AND SUGARCANE BAGASSE IN PARTICLEBOARDS
ABSTRACT The use of alternative materials such as lignocellulosic residues in the production of particleboards has increased considering that these residues are produced in large volumes and often do not have an appropriate destination. This research studied the use of residues from cellulose industries, sugarcane bagasse, and castor oil-based polyurethane r
Eng. Agríc.. Publicado em: 2021-02
-
5. MECHANICAL AND PHYSICAL PROPERTIES OF WOOD/POLYETHYLENE COMPOSITE REINFORCED WITH TIO2 NANOPARTICLES
ABSTRACT Wood plastic composite was fabricated using high density polyethylene and pine wood fiber. The effect of addition of TiO2 nanoparticles at different weight fractions (0%, 1%, 3%, and 5%) on some properties of the composite was examined. The experimental composites were tested for bending strength, tensile strength, Izod impact strength, thickness sw
CERNE. Publicado em: 2020-12
-
6. BEHAVIOR OF THERMALLY MODIFIED WOOD TO BIODETERIORATION BY XYLOPHAGE FUNGI
ABSTRACT Thermally modified wood undergoes chemical, physical, and mechanical modifications, resulting in changes in resistance to wood biodegrading agents. The objective of this study was to evaluate the resistance to biodeterioration of thermally modified wood by the industrial process VAP HolzSysteme® of Eucalyptus grandis, Pinus taeda and Tectona grandi
CERNE. Publicado em: 2020-09
-
7. PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD FROM Eucalyptus grandis PRODUCED BY UREA FORMALDEHYDE RESIN WITH SiO2 NANOPARTICLES
ABSTRACT The use of nanoparticles appears to be a feasible option for improving the quality of a range of wood-based products. Studies show that they can improve both the physical and mechanical properties of wood and wood-based products. This preliminary study aimed to analyze the influence of SiO2 nanoparticles on the physical and mechanical properties of
Eng. Agríc.. Publicado em: 2020-06
-
8. PHYSICAL AND THERMAL PROPERTIES OF EUCALYPTUS WOOD CHARCOAL.
ABSTRACT The knowledge of the physical and thermal properties of eucalyptus charcoal is of fundamental importance in the design of equipment and development of cooling technologies. However, literature about physical properties for eucalyptus wood charcoal is largely unavailable, especially the thermal and aerodynamic properties, for the same material. The a
CERNE. Publicado em: 2020-03
-
9. Influence of treatment with water-soluble CCB preservative on the physical-mechanical properties of brazilian tropical timber
This aim of this work is to present an analysis of the influence of impregnation against biological demand, realized with saline solution of CCB (Chromated Copper Borate preservative) by vacuum-pressure process, on physical-mechanical properties of tropical wood species Simarouba sp., Cedrelinga catenaeformis and Erisma uncinatum Warm. In theory, such proces
Mat. Res.. Publicado em: 13/01/2020
-
10. EVALUATION OF THE Peltophorum vogelianum Benth. WOOD SPECIES FOR STRUCTURAL USE
ABSTRACT Wood is a material used for various purposes since ancient times and is mainly used in civil and rural construction and industry. Due to the predatory exploitation of known trees, it is necessary to characterize new species for use in urban and rural structures as alternatives of species commonly used. This study aimed to determine the physical and
Eng. Agríc.. Publicado em: 09/12/2019
-
11. Influência da composição granulométrica das partículas de resíduos de madeira nas propriedades de compósitos minerais: parte 2: gesso-madeira
Resumo Resíduos de construção e demolição (RCD) de madeira podem ser incorporados em compósitos de fibras naturais, reduzindo os impactos ambientais, o que contribui para o desenvolvimento de materiais, produtos e processos mais sustentáveis. Nesse sentido, o objetivo deste estudo foi avaliar a influência da composição granulométrica das partícul
Ambient. constr.. Publicado em: 03/10/2019
-
12. Painéis de pínus e bagaço de cana empregando-se dois adesivos para uso na construção civil
Resumo O presente trabalho objetivou produzir e avaliar painéis aglomerados empregando-se partículas de bagaço de cana-de-açúcar (Saccharum officinarum) e de pínus (Pinus taeda, Pinus elliottii), comparando-se a eficiência de dois adesivos, ureia-formaldeído e poliuretano derivado do óleo de mamona. Os painéis foram preparados com 60% de partícula
Ambient. constr.. Publicado em: 03/10/2019