Wood Panels
Mostrando 1-12 de 61 artigos, teses e dissertações.
-
1. USE OF RESIDUES FROM THE CELLULOSE INDUSTRY AND SUGARCANE BAGASSE IN PARTICLEBOARDS
ABSTRACT The use of alternative materials such as lignocellulosic residues in the production of particleboards has increased considering that these residues are produced in large volumes and often do not have an appropriate destination. This research studied the use of residues from cellulose industries, sugarcane bagasse, and castor oil-based polyurethane r
Eng. Agríc.. Publicado em: 2021-02
-
2. PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD FROM Eucalyptus grandis PRODUCED BY UREA FORMALDEHYDE RESIN WITH SiO2 NANOPARTICLES
ABSTRACT The use of nanoparticles appears to be a feasible option for improving the quality of a range of wood-based products. Studies show that they can improve both the physical and mechanical properties of wood and wood-based products. This preliminary study aimed to analyze the influence of SiO2 nanoparticles on the physical and mechanical properties of
Eng. Agríc.. Publicado em: 2020-06
-
3. STUDYING THE GRAMMAGE IN LVL PANELS GLUED WITH CASTOR OIL-BASED POLYURETHANE ADHESIVE: A POSSIBLE ALTERNATIVE TO FORMALDEHYDE RELEASING ADHESIVES.
ABSTRACT Efforts have been done in order to decrease the human dependence on petroleum materials. This idea can be applied for wood adhesives and wood products. This study proposes to evaluate laminated veneer lumber (LVL) panels of Hevea brasiliensis produced with castor oil-based polyurethane and resorcinol formaldehyde in different grammages. Six rubber t
CERNE. Publicado em: 2020-03
-
4. Strength and Stiffness of Cross Laminated Timber (CLT) panels produced with Pinus and Eucalyptus: experimental and analytical comparisons
ABSTRACT The CLT is a building material that comes mainly used in Europe where it was developed. Lightweight, sturdy and eco-friendly, this material has become one of the most important constructive methods in the world. CLT are panels formed by layers of wood glued to each other orthogonally, always in odd numbers, symmetrical with respect to the central la
Matéria (Rio J.). Publicado em: 25/11/2019
-
5. Painéis de pínus e bagaço de cana empregando-se dois adesivos para uso na construção civil
Resumo O presente trabalho objetivou produzir e avaliar painéis aglomerados empregando-se partículas de bagaço de cana-de-açúcar (Saccharum officinarum) e de pínus (Pinus taeda, Pinus elliottii), comparando-se a eficiência de dois adesivos, ureia-formaldeído e poliuretano derivado do óleo de mamona. Os painéis foram preparados com 60% de partícula
Ambient. constr.. Publicado em: 03/10/2019
-
6. Physical-mechanical Properties of Plywood Produced With Acrocarpus fraxinifolius and Pinus oocarpa
ABSTRACT The present study has the objective of evaluating the physical-mechanical properties of plywood produced with Acrocarpus fraxinifolius wood, as well as the effect of combining their veneer with Pinus veneer. The wood of Acrocarpus fraxinifolius and Pinus oocarpa were used in the production of the panels. The plywood was produced with five veneers; t
Floresta Ambient.. Publicado em: 05/09/2019
-
7. Evaluation of Biomass Properties for the Production of Solid Biofuels
ABSTRACT The efficient use of biomass as fuel requires prior knowledge of the composition and properties of the material in order to be able to develop technologies for its efficient combustion while ensuring that emissions of pollutants remain within acceptable limits. Therefore, the analysis of the physical and chemical properties of these materials is ess
Floresta Ambient.. Publicado em: 05/09/2019
-
8. Technological properties of particleboards produced using mixture of pines and bamboo
RESUMO: Este estudo tem por objetivo avaliar as propriedades tecnológicas de painéis de madeira produzidos com partículas de bambu da espécie Phyllostachysedulis, e do gênero tradicionalmente utilizado pelo setor para a produção dos painéis particulados no Brasil, o Pinus spp. As varas de bambu com três anos de idade foram coletadas em Frei Rogéri
Cienc. Rural. Publicado em: 13/06/2019
-
9. Paineis híbridos de lâminas e partículas de madeira para uso estrutural
Resumo O uso de painéis de madeira tem ganhado destaque na indústria da construção civil. Os painéis MDP não atingem requisitos estruturais, ao contrário dos painéis OSB e compensado. Uma alternativa a fim de aprimorar o uso de painéis de partículas de madeira consiste no reforço desses com lâminas de madeira (painéis híbridos). Esta pesquisa o
Ambient. constr.. Publicado em: 10/06/2019
-
10. Painel híbrido OSB/MDP de madeira Pinus taeda e resina poliuretana à base de óleo de mamona
Resumo Os painéis reconstituídos à base de madeira são uma alternativa para utilização na construção civil e na indústria do mobiliário. Dentre os tipos de painéis, destacam-se o OSB (Oriented Strand Board) e o MDP (Medium Density Particleboard). O objetivo desta pesquisa foi avaliar as propriedades físicas e mecânicas de painéis híbridos OSB/
Ambient. constr.. Publicado em: 10/06/2019
-
11. Strength and Stiffness of Cross Laminated Timber (CLT) panels produced with Pinus and Eucalyptus: experimental and analytical comparisons
ABSTRACT The CLT is a building material that comes mainly used in Europe where it was developed. Lightweight, sturdy and eco-friendly, this material has become one of the most important constructive methods in the world. CLT are panels formed by layers of wood glued to each other orthogonally, always in odd numbers, symmetrical with respect to the central la
Matéria (Rio J.). Publicado em: 10/06/2019
-
12. DISPLACEMENT MEASUREMENT IN SAWN WOOD AND WOOD PANEL BEAMS USING PARTICLE IMAGE VELOCIMETRY
ABSTRACT Throughout their useful life structures demand monitoring to verify their conditions of use. Thus, the need arises to seek methodologies capable to evaluate displacements and deformations in structural components of buildings. The objective of this research was to evaluate the use of the particle image velocimetry (PIV) technique to analyze test spe
CERNE. Publicado em: 20/05/2019