Wood Density
Mostrando 1-12 de 214 artigos, teses e dissertações.
-
1. MECHANICAL AND PHYSICAL PROPERTIES OF WOOD/POLYETHYLENE COMPOSITE REINFORCED WITH TIO2 NANOPARTICLES
ABSTRACT Wood plastic composite was fabricated using high density polyethylene and pine wood fiber. The effect of addition of TiO2 nanoparticles at different weight fractions (0%, 1%, 3%, and 5%) on some properties of the composite was examined. The experimental composites were tested for bending strength, tensile strength, Izod impact strength, thickness sw
CERNE. Publicado em: 2020-12
-
2. THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS
ABSTRACT The altitude is an important factor to affect the growth and development of saplings of the tree. However, the effect of altitude on the growth and properties of wood during their young stage it has been little studied. This study, therefore, aimed to evaluate the influence of two different altitude steps: 795 m (a.s.l. low-altitude) and 1350 m (a.s
CERNE. Publicado em: 2020-09
-
3. STUDY OF THERMAL EXPANSION AND COMPRESSION STRENGTH OF THREE WOOD SPECIES FROM PLANTATIONS
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
CERNE. Publicado em: 2020-06
-
4. Inflammatory segmental vitiligo during oral isotretinoin use: a casual association?,
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
An. Bras. Dermatol.. Publicado em: 2020-06
-
5. ESTIMATION OF WOOD TOUGHNESS IN BRAZILIAN TROPICAL TREE SPECIES
ABSTRACT Wood has been used for several purposes such as in civil and rural construction. Knowing wood mechanical behavior under short-term loading is essential for safer structural designs. However, wood toughness is a mechanical property little investigated for this purpose. Thus, this study aimed to evaluate, using exponential and polynomial regression mo
Eng. Agríc.. Publicado em: 2020-04
-
6. Colonization-related functional traits of plants in a 50-hectare plot of secondary tropical forest
ABSTRACT The growth-survival trade-off hypothesis states that functional traits of stem, wood, leaves and fruits govern acquisitive and conservative strategies of plant species that grow/survive differently in forests. We aimed to determine whether heterogeneity during the colonization of a secondary Atlantic Forest fragment causes differences in colonizatio
Acta Bot. Bras.. Publicado em: 2020-03
-
7. PHYSICAL AND THERMAL PROPERTIES OF EUCALYPTUS WOOD CHARCOAL.
ABSTRACT The knowledge of the physical and thermal properties of eucalyptus charcoal is of fundamental importance in the design of equipment and development of cooling technologies. However, literature about physical properties for eucalyptus wood charcoal is largely unavailable, especially the thermal and aerodynamic properties, for the same material. The a
CERNE. Publicado em: 2020-03
-
8. APPARENT DENSITY AS AN ESTIMATOR OF WOOD PROPERTIES OBTAINED IN TESTS WHERE FAILURE IS FRAGILE
ABSTRACT The use of new wood species in construction requires knowledge of their properties for safer and more economical structural sizing. In Brazil, structural projects are carried out according to the standard document ABNT NBR 7190:1997. Tests required by this standard for the complete characterization of species require large machines with high costs,
Eng. Agríc.. Publicado em: 2020-02
-
9. DEVELOPING NEAR INFRARED SPECTROSCOPIC MODELS FOR PREDICTING DENSITY OF Eucalyptus WOOD BASED ON INDIRECT MEASUREMENT
ABSTRACT The objective of this study was to establish multivariate models for the prediction of wood basic density with reference to the values of average density of trees and near infrared (NIR) spectra measured in the breast height. The wood basic density of 39 Eucalyptus clones was determined in the laboratory by means of the mean longitudinal positions o
CERNE. Publicado em: 20/12/2019
-
10. Number of laminae on the mechanical behavior of glued laminated timber (glulam) of Toona ciliata produced with vegetable polyurethane adhesive
RESUMO A madeira laminada colada (MLC) é um material compósito obtido a partir da colagem de lâminas de madeira dispostas com as fibras paralelas entre si. O objetivo deste trabalho foi avaliar a influência do número de lâminas no comportamento mecânico de MLC de Toona ciliata produzidas com adesivo poliuretano de base vegetal. As vigas de MLC foram p
Ciênc. agrotec.. Publicado em: 20/12/2019
-
11. EVALUATION OF THE Peltophorum vogelianum Benth. WOOD SPECIES FOR STRUCTURAL USE
ABSTRACT Wood is a material used for various purposes since ancient times and is mainly used in civil and rural construction and industry. Due to the predatory exploitation of known trees, it is necessary to characterize new species for use in urban and rural structures as alternatives of species commonly used. This study aimed to determine the physical and
Eng. Agríc.. Publicado em: 09/12/2019
-
12. Biomassa de espécies florestais para produção de carvão vegetal
Resumo Devido à alta demanda das empresas por geração de energia oriunda de fontes renováveis, o objetivo deste estudo foi analisar as propriedades da madeira e do carvão proveniente de três espécies florestais: Ceiba pentandra (L.) Gaertn. (Sumaúma), Guatteria sp. (Envirão) e Brosimum sp. (Mumuré). O material foi coletado na Empresa Rosa Madeireir
Ciênc. Florest.. Publicado em: 02/12/2019