Wind Effects
Mostrando 1-12 de 116 artigos, teses e dissertações.
-
1. MICROPLÁSTICOS: USO NA INDÚSTRIA COSMÉTICA E IMPACTOS NO AMBIENTE AQUÁTICO
Environmental pollution from plastics and microplastics is currently one of the most relevant issues of the scientific community and cosmetic industry. In particular, microplastics are referred to as small pieces of plastic less than five millimeters (<5mm) and do not dissolve in water, can be harmful to the ocean and aquatic life. Microplastics can be desig
Química Nova. Publicado em: 2022
-
2. Simulation of Current Pulses and Sound Waves Resulting from Partial Discharges in a Needle-Plane Geometry in Air
Abstract Partial discharges can occur in different types of electric equipment and cause progressive insulation deterioration, so there is interest in monitoring partial discharges for assessing the state of the isolation of an electric system and to predict failures. Techniques to detect partial discharges, such as detecting ultrasonic emission, have been p
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. COMPUTATIONAL ANALYSIS OF LOAD VENTILATION IN BROILER TRANSPORT
ABSTRACT The characterization of ventilation during the transport of broiler chickens is essential for identifying and characterizing the potential problems of a convective heat flow and its effects on the welfare and the health and production conditions of the chickens. The objective of this study was to evaluate the ventilation patterns in two layout model
Eng. Agríc.. Publicado em: 2021-02
-
4. Aerodynamic effects on a high slenderness concrete chimney
Resumo Este trabalho apresenta os resultados da determinação teórico-experimental do comportamento aerodinâmico de uma chaminé esbelta de concreto armado, com 150m de altura e esbeltez 30. Foram construídos dois modelos reduzidos: um rígido para medição das pressões e outro aeroelástico, reproduzindo as principais características dinâmicas da es
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
5. Impacto nas Propriedades Mecânicas e Tensões Residuais do Material ASTM A572 Grau 50 Soldado por Arco Submerso com Alívio de Tensões Térmico
Resumo O aço ASTM A572 Grau 50 é utilizado na fabricação de conjuntos soldados para aerogeradores, por este motivo, a realização de alívio de tensões é de grande importância para correção dos impactos causados pelos processos de soldagem, bem como, o conhecimento das propriedades finais obtidas com a realização deste processo. O objetivo desse
Soldag. insp.. Publicado em: 02/12/2019
-
6. Spatial pattern of the environmental exposure to tin in the vicinity of an alloy industry in Volta Redonda, Rio de Janeiro State, Brazil
Resumo: O estanho é amplamente utilizado na indústria. A literatura sobre seus efeitos em humanos é escassa, principalmente quanto aos valores de referência em indicadores biológicos como sangue e urina. Também são raros os estudos sobre os limites do estanho no meio ambiente. O estudo teve como objetivo avaliar os pontos críticos da distribuição e
Cad. Saúde Pública. Publicado em: 14/10/2019
-
7. Assessment of the effects of vegetational cover on the long-term stabilityof a waste rock dump
Abstract Waste rock dump reclamation includes re-grading the banks to flatten the overall slope followed by re-vegetation. These measures are required to reduce surface erosion, provide physical stability, and meet future use goals. In some cases, the presence of trees can cause localized shear zones in a waste rock dump by the load of the tree mass and the
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
8. Ultimate bending capacity of aged fixed platform by considering the effect of marine fouling
Abstract For offshore structures, especially jacket supported structure such as fixed platform and offshore wind turbine, the underwater area provides an ideal site for corrosion formation and marine fouling. In this marine environment, the structures are exposed to particularly aggressive corrosion and colonized by marine organisms involving a diversity of
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
9. WIND EFFECTS ON FOUNDATIONS OF SILOS AND LIGHT STRUCTURES: SOLUTION BY USE OF STEEL PILES IN DIABASIC SOIL
ABSTRACT Wind solicitations generate horizontal, tensile, and compressive stresses on building foundations. In empty light structures, such as agricultural greenhouses and, in the specific case of silos and elevated structures such as metal water tanks, the consideration of these loads becomes important because the lack of the weight component due to the sto
Eng. Agríc.. Publicado em: 19/06/2019
-
10. THE TOPPLING OF AN IRRIGATION CENTER PIVOT SUBMITTED TO WIND ACTION EFFECTS
ABSTRACT This research aims to improve the study about the stability of truss structures used in pivot irrigation, widely used due to the growing demand for food production, when submitted to wind effects. Specifically, it aims to verify the maximum wind speed supported by an irrigation center pivot structure when submitted to the load effects caused by wind
Eng. Agríc.. Publicado em: 25/04/2019
-
11. Effects of Bio-Inspired Surface Roughness on a Swept Back Tapered NACA 4412 Wing
ABSTRACT: This paper presents the overall pros and cons of the effect of surface roughness elements over a NACA 4412 tapered, swept back half wing with a sweep angle of 30º and a dihedral angle of 5º. The tests were conducted at a Reynolds number of 4 × 105 in the IIUM Low Speed wind tunnel. Different roughness sizes and roughness locations were tested fo
J. Aerosp. Technol. Manag.. Publicado em: 28/03/2019
-
12. Understanding heat stress in beef cattle
ABSTRACT Thermal stress is the result of a misbalance between heat produced or gained from the environment and the amount of heat lost to the environment. The level of thermal stress can range from minor or no effect to death of vulnerable animals. Under summertime conditions, thermal stress results in hyperthermia or heat stress. Heat stress in feedlot catt
R. Bras. Zootec.. Publicado em: 29/11/2018