Wet Blue Leather
Mostrando 1-12 de 14 artigos, teses e dissertações.
-
1. Consortium of Microalgae for Tannery Effluent Treatment
Abstract Wastewater generated in tanneries have essential elements for microalgae growth, but it has also some toxic compounds that may hinder or restrain the growth of microalgae in this environment. This work tested microalgae consortium growth originating from a deactivated effluent treatment decanter of a complete tannery (beamhouse to finished leather)
Braz. arch. biol. technol.. Publicado em: 13/06/2019
-
2. Potential of wet blue leather waste for ruminant feeding
The objective of this study was to find an alternative to minimize environmental contamination by leather waste using it as ruminant feed. The wet blue leather wastes (WB) without chrome extraction were compared with the leather wastes in which the chrome was extracted (CE). Both materials had 99.7% of dry matter (DM), but the crude protein level was higher
Revista Brasileira de Zootecnia. Publicado em: 2012-04
-
3. Influência dos processos de engraxe e acabamento na modificação da estrutura e nas propriedades do couro
O estudo do colagênio na pele sobre sua estrutura e propriedades, composição e interações com substâncias levam a um maior entendimento das alterações químicas, micro e macroscópicas que ocorrem durante o processo de produção do couro. No processamento do couro são realizadas várias etapas que promovem a alteração da estrutura dérmica da pel
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
4. The influence of Chromium supplied by tanning and wet finishing processes on the formation of cr(vi) in leather
Chromium used in leather manufacturing can be oxidized from the trivalent to the hexavalent state, causing environmental concerns. In this study, the influence of Cr(III) from tanning, deacidification pH, fatliquors, chrome retanning and vegetable retanning on the formation of Cr(VI) in leather was analyzed by comparing natural and aged samples. In wet-blue
Brazilian Journal of Chemical Engineering. Publicado em: 2011-06
-
5. A comparative analysis of attribute reduction algorithms applied to wet-blue leather defects classification.
This paper presents an attribute reduction comparative study on four linear discriminant analysis techniques: FisherFace, CLDA, DLDA and YLDA. The attribute reduction has been applied to the problem of leather defect c1assification using four different c1assifiers: C4.5, KNN, Naive Bayes and Support Veetor Machines. Results and analyses on the performance of
BRASILIAN SYMPOSIUM ON COMPUTER GRAPHICS AND IMAGE PROCESSING. Publicado em: 2011
-
6. Desenvolvimento de compósito de pu de mamona com carga de resíduo de couro para isolação térmica
A padronização da espessura da pele bovina na indústria de couro gera o resíduo da serragem ou rebaixamento, também conhecido por wet-blue. No final do século XX, a indústria brasileira descartou cerca de 131 mil toneladas desse resíduo na natureza, gerando um grande passivo ambiental. Neste trabalho apresentam-se análises de propriedades termofísi
Publicado em: 2010
-
7. Attributes reduction using discriminant analysis with applications in bovine leather defects detection / Redução de atributos utilizando análise discriminante com aplicações na detecção de defeitos em couro bovino
Este trabalho apresenta um estudo e análise de técnicas de redução de atributos, baseada na análise discriminante aplicada a problemas de detecção de defeitos em imagens de couros bovinos no estágio couro cru e wet-blue. Foi realizado um estudo sobre casos que geram problemas no uso da análise discriminante quando aplicada em situações propícias
Publicado em: 2009
-
8. PreparaÃÃo de carvÃo ativado e impregnaÃÃo com ferro ou cromo para aplicaÃÃes em processos de descontaminaÃÃo ambiental. / Preparation and impregnation of activated carbons with iron or chromium for aplication on environmental descontamination processes.
This work has five chapters, with objective of the preparation of activated carbons (AC) from agroindustrial residues (coffee hulls and wet blue leather) and preparation of catalysts using these AC for degradation of organic compounds. In the first chapter is showed a review from the literature about AC, the surface characterisitics and properties, the uses
Publicado em: 2008
-
9. Treatment of the chromium-containing solid wastes from leather industry: use in adsorption process and as nitrogen source in agriculture. / Tratamento de rejeitos sÃlidos contendo cromo da indÃstria de couro: uso em processos de adsorÃÃo e como fonte de nitrogÃnio na agricultura.
The leather industry has a great economic importance for Brazil, however it is responsible for the generation of solid wastes containing chromium (sawdust and stripes of wet blue leather), which need suitable disposal for being classified as class 1 waste. The objectives of this work were to treat this waste for chromium removal and to use the resultant mate
Publicado em: 2007
-
10. Otimização de um processo de classificação de couros no estágio wet blue : um caso em uma indústria curtidora
A melhoria de qualidade e redução de custos para produtos e processos industriais pode ser realizada utilizando-se métodos de otimização experimental. Esta dissertação apresenta um método estruturado para a otimização do processo de classificação de couro wet blue usando em forma integrada as ferramentas de Análise de Sistemas de Medição e Pro
Publicado em: 2007
-
11. Use of Wet Blue Leather Rejects in the Feeding of Ruminants: Nutricional and Pathological Potential. / UtilizaÃÃo de resÃduos de couro na alimentaÃÃo de ruminantes:Potencialidades nutricionais e patolÃgicas
O Brasil à um grande produtor de couro, sendo o mÃtodo mais utilizado o curtimento ao cromo que gera uma enorme quantidade de resÃduos contaminados, os quais constituem um grave problema ambiental. TÃm sido desenvolvidas tecnologias para a retirada do cromo desses resÃduos, entretanto, hà necessidade de se ter destinaÃÃo adequada para o material com
Publicado em: 2007
-
12. Nitrificação de efluente de reator anaeróbio compartimentado em filtros percoladores com a utilização da serragem de couro do tipo wet blue como meio suporte / Nitrification of anaerobic baffed reactor effluent into trickling filters using wet blue leather sawing as a filter packing
The aim of the work is to promote the ammoniacal nitrogen removal from anaerobic baffed reactor effluent using aerobic trickling filters, through the nitrification process. The research was developed in two phases; firstly the leather sawing was prepared through sieving and washing, later the domestic sewage was applied into four tricking filters. The F1 and
Publicado em: 2006