Welding Energy
Mostrando 13-24 de 44 artigos, teses e dissertações.
-
13. Vida a fatiga de uniones soldadas mediante PAW de aceros microaleados al boro
ABSTRACT In the last years microalloyed boron steels have been adopted in the automotive industry to achieve weight reductions. Namely, they are used as load-bearing elements such as pillars and reinforcements, in a quenched and tempered (QT) condition with tensile strength ranging from 800 to 1300 MPa. Dual-Phase (DP) steels have also been introduced in thi
Matéria (Rio J.). Publicado em: 19/07/2018
-
14. A Comparative Study of the Heat Input During Laser Welding of Aeronautical Aluminum Alloy AA6013-T4
ABSTRACT The heat input is the amount of energy supplied per unit length of the welded workpiece. In this study, the effect of two different heat inputs in laser beam welding of a high strength aluminum alloy AA6013-T4 was evaluated from macrostructural and microstructural points of view. The experiments were performed using a continuous wave 2 kW Yb-fiber l
J. Aerosp. Technol. Manag.. Publicado em: 14/06/2018
-
15. Thermomechanical Modelling of FSW Process Using a Cylindrical Tool in an Aluminum Alloy Alclad AA 2024-T3
The Friction Stir Welding Process (FSW/P) is an innovative technique to join metals using the plasticity, not occurring the melting. It was initially applied in aluminum alloys, but recently it has been extended to other materials, for example, copper, steel alloys, polimers and others. In this work it is analyzed the thermo mechanical modelling of the energ
Mat. Res.. Publicado em: 07/05/2018
-
16. Mechanical and Metallurgical Characterization of Laser Welding on P91 Ferritic Steel and Incoloy 800HT Dissimilar Joints
In this work, microstructural characterization and mechanical properties of P91 and Incoloy 800HT dissimilar laser beam welded joint were analyzed. In addition to that, metallographical studies were conducted using Optical microscopy, Scanning electron microscopy (SEM) equipped with Energy-dispersive X-ray spectroscopy (EDX) and X-Ray diffraction analysis (
Mat. Res.. Publicado em: 01/02/2018
-
17. Fracture Toughness and Charpy CVN Data for A36 Steel with Wet Welding
Abstract This study presents KIC data obtained from KIC-CVN correlations from Charpy CVN values. For this study, T-welded connections were manufactured from ASTM A36 and E6013 electrodes in dry conditions. Then, a rectangular grinding at the weld toe was carried out and filled with wet welding. Charpy specimens were extracted to obtain CVN values. An exhaust
Soldag. insp.. Publicado em: 2017-09
-
18. Evaluation of Residual Stresses and Mechanical Properties of IF Steel Welded Joints by Laser and Plasma Processes
Interstitial free (IF) steel has an extensive application in the automotive industry where the Laser Beam Welding (LBW) process is widely used due to its high productivity. Similarly, the other used process, Plasma Arc Welding (PAW), is characterized by a greater energy concentration and current density and therefore lower distortion, higher welding speeds a
Mat. Res.. Publicado em: 29/04/2016
-
19. Fully Automatic Spot Welding System for Application in Automotive Industry
Abstract A Virtual Machine has led to a fully automatic spot welding system. All necessary parameters are created by measuring systems and algorithms running in the Virtual Machine. A hybrid operating circuit allows the Virtual Machine to read the exact process voltage between the tips of the electrodes every 50 µs. Actual welding voltage and current allow
Soldag. insp.. Publicado em: 2015-12
-
20. Effect of Continuous and Pulsed Current on the Metallurgical and Mechanical Properties of Gas Tungsten Arc Welded AISI 4340 Aeronautical and AISI 304 L Austenitic Stainless Steel Dissimilar Joints
In this research work, the weldability of low alloyed AISI 4340 aeronautical steel and AISI 304L austenitic stainless steel joined by continuous current (CC) and pulsed current (PC) gas tungsten arc welding (GTAW) techniques, using ER309L and ERNiCr-3 filler metals was investigated. The main focus of the study involves the investigation on the effect of cont
Mat. Res.. Publicado em: 2015-02
-
21. Investigation of the nugget zone corrosion behavior in friction stir welded lap joints of 6061-T6 aluminum alloy
The corrosion behavior at different positions (top and bottom) of the weld nugget zone along the thickness plates in AA6061-T6 aluminum alloys welded by friction stir lap welding, under the conditions of 1000 rpm-60 mm/min and 900 rpm-40 mm/min in a 3.5 wt% NaCl solution, was investigated by Tafel polarization at ambient temperature. The morphology of the nu
Mat. Res.. Publicado em: 2014-12
-
22. Effects of post weld heat treatments on the microstructure and mechanical properties of dissimilar weld of supermartensític stainless steel
A supermartensitic stainless steel with composition 12.2%Cr-5.8%Ni-1.90%Mo-0.028%C (%wt.) was welded by gas tungsten arc welding (GTAW) with superduplex stainless steel filler metal. Post weld heat treatments (PWHT) at 650 ºC for different periods of time were performed in order to decrease the hardness in the heat affected zone (HAZ). This paper deals with
Mat. Res.. Publicado em: 26/10/2014
-
23. Corrosion behavior of friction stir welded lap joints of AA6061-T6 aluminum alloy
In this work, the corrosion behaviors of friction-stir lap welding of 6061-T6 Al-alloy are studied. The friction-stir lap welding was performed under different welding conditions (rotation speed and welding speed). The corrosion behavior of the parent alloy, the weld nugget zone (WNZ), and the heat affected zone (HAZ) of each welded sample working as an elec
Mat. Res.. Publicado em: 09/05/2014
-
24. Designing of CK45 carbon steel and AISI 304 stainless steel dissimilar welds
Gas tungsten arc welding of CK45 and AISI304 stainless steel was performed through preparation of different types of samples using ER308L and ERNi-1 wires. Welded samples were studied by different techniques including optical metallography, scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM-EDS), X-ray diffraction, hardness
Mat. Res.. Publicado em: 11/10/2013