Water Samples
Mostrando 1-12 de 3589 artigos, teses e dissertações.
-
1. The influence of compositional variability of dimension stone residues on the properties of rustic porous ceramic tiles
Abstract This study analyzed how the compositional variability of dimension stone residues influences the characteristics of rustic porous ceramic tiles. The specimens were prepared by adding 20 wt% of dimension stone residue to the clay and sintered at 1000 °C for 1 h. The testing assays performed were physical properties and structural analysis through sc
Cerâmica. Publicado em: 2023
-
2. Use of Direct Aqueous Injection and Solid Phase Extraction Coupled with Hydrophilic Interaction Chromatography to Analyze Haloacetic Acids in Drinking Water Samples
In this study, two analytical methods were evaluated to determine haloacetic acids (HAAs) in drinking water samples. Direct aqueous injection (DAI) and solid phase extraction (SPE) were evaluated and determination was performed by liquid chromatography tandem mass spectrometry (LC-MS/MS) with a hydrophilic interaction chromatography (HILIC) analytical column
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. AN ADAPTED UNMANNED AERIAL VEHICLE FOR ENVIRONMENTAL WATER SAMPLING
In this work an unmanned aerial vehicle (UAV) was adapted to be used as an environmental tool to collect water samples of sea, estuary, and mangrove for further analysis by gas chromatography with a mass detector (GC-MS). The sampling automated system was based on a microcontroller, a solenoid valve, and a peristaltic mini-pump that was coupled to a quadcopt
Química Nova. Publicado em: 2022
-
4. Pressed roofing tile based on cementitious material and basalt powder: Technological and toxicological characterization
Abstract This study aims to develop a pressed concrete roofing tile from powder technology containing basalt powder in substitution of fine sand (aggregate) for application in building covers. Specimens were submitted to technological and toxicological characterization. Hence, pressed specimens based on cement and basalt powder were analyzed. In the bending
REM - International Engineering Journal. Publicado em: 2022
-
5. Least limiting water range in Oxisol under two conservation tillage systems in sugarcane farming
ABSTRACT The Least Limiting Water Range (LLWR) is an indicator of soil physical quality, contributing in information to propose soil management systems in agricultural farming process. This work aimed to assess the usage of LLWR and critical soil bulk density for physical-water quality evaluations, as well as its effect on sugarcane farming under no-tillage
Revista Ceres. Publicado em: 2022
-
6. An Eco-Friendly Proposal by Integrating Chromatographic Fingerprinting and Multivariate Control Chart in a Non-Target Analysis to Evaluate Grape Juices from Different Farming Practices
A potential eco-friendly method without organic solvents is presented by integrating a chromatographic fingerprint and multivariate control chart based on Q residuals to differentiate grape juices from different farming practices. The sample preparation was only water dilution, and the mobile phase was water acidified with sulfuric acid, which can be readily
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
7. Dispersive Solid-Phase Extraction Using 3-Mercaptopropyltrimethoxysilane Functionalized Magnetic MWCNT-Based Nanocomposite for Selective and Efficient Preconcentration of Pb2+ with FAAS Determination
A novel nanocomposite based on magnetic multiwalled carbon nanotubes coated with SiO2 and functionalized with 3-mercaptopropyltrimethoxysilane (3-MPTMS) was prepared for the efficient extraction and quantification of lead ions from water samples. The adsorption capacity of this adsorbent could reach 1.995 mg g-1 Pb2+ in an equilibrium time of 30 min. Under o
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
8. Mix design formulation range for metakaolin-based geopolymer synthesis
Abstract This article presents a range of mix design formulations to obtain metakaolin-based geopolymer synthesis. Geopolymer samples were synthesized from metakaolin, a 10 M sodium hydroxide solution, and alkaline sodium silicate. These three components were mixed in different proportions to form a paste which was molded in a cylindrical shape, set at room
REM - International Engineering Journal. Publicado em: 2022
-
9. Development of a Disposable Pipette Extraction Method Using Coffee Silverskin as an Adsorbent for Chromium Determination in Wastewater Samples by Solid Phase Extraction
A procedure using disposable pipette tips adapted for solid-phase extraction, known as DPX SPE, was used as an alternative way for the chromium determination in wastewater samples. DPX-SPE consists of a device which allows a dynamic contact between the sample and the solid-phase. A residue obtained from the processing of coffee beans, denominate coffee silve
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
10. Iron Cobaltite (FeCo2O4) Nanocatalysts for Water-Oxidation: Effects of Annealing Temperature on Catalytic Properties
The development of efficient, stable, and non-precious metal water oxidation catalysts (WOCs) is a matter of importance for sustainable energy research. In this work, iron cobaltite (FeCo2O4) nanoparticles were prepared by the coprecipitation method, and we present the effect of heat treatment (250, 350, 450, 650 and 900 °C) on the catalytic properties. Cat
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
11. A New Approach for Histamine Functionalized Nanoparticles as Sorbent Phase for Bar Adsorptive Microextraction (BAµE) and Determination of Parabens in Water by HPLC-DAD
In this study, for the first time, histamine-functionalized magnetic nanoparticles (HIS-MNP) were used as sorbent phase combined with bar adsorptive microextraction (BAµE) for the determination of methylparaben (MP), ethylparaben (EP), propylparaben (PP), and butylparaben (BP) in water samples by high performance liquid chromatography coupled with diode arr
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
12. Determinação de etil-glicuronídeo e etil-sulfato em sangue por UPLC-MS/MS: aplicação clínica em vítimas de trauma
We developed a UPLC-MS/MS method for the quantification of the ethanol metabolites ethyl-glucuronide (EtG) and ethyl-sulfate (EtS) in blood samples. Sample preparation was a protein precipitation with acetonitrile 0.1% formic acid containing internal standards (IS) 0.5 µg mL-1 EtG-D5 and EtS-D5. Chromatographic separation was performed in a fluoro-phenyl co
Química Nova. Publicado em: 2022