Voltage Stability
Mostrando 37-48 de 111 artigos, teses e dissertações.
-
37. Maximização da margem de estabilidade sujeito a minimização do custo de produção da energia eletrica utilizando formulação em dois niveis / Maximization of the stability margin subjected to electric power generation cos minimization using a bilevel programming approach
O presente trabalho apresenta um modelo para o planejamento da operação de sistemas de potência visando maximizar a margem de estabilidade de tensão ao mesmo tempo em que minimizam-se os custos da produção da energia (despacho econômico). O objetivo é obter uma solução para o planejamento da operação da rede que leve em conta não só aspectos t�
Publicado em: 2008
-
38. Computation of voltage stability margins of power systems / Obtenção da margem minima de estabilidade de tensão de sistemas eletricos de potencia
This work presents a new and fast method for computing the minimum voltage stability margin of electric power systems. The computation of the voltage stability margin (VSM) is often required for the planning and operation of power systems. Usually, loads are increased along a predefined direction, which can be estimated based on historical data or load forec
Publicado em: 2007
-
39. A Contribution to the voltage stability studies within power systems: new aspects related to load representation. / Uma contribuição ao estudo da estabilidade de tensão em sistemas elétricos de potência: novos aspectos relacionados à representação da carga.
This work investigates the impact of transient and steady state load behavior on power systems voltage stability. In order to do this, a detailed electric power system model is used to reproduce the main aspects of voltage instability and collapse phenomena. The numerical solution of the resulting non-linear differential-algebraic equations is carried out by
Publicado em: 2007
-
40. COMPARATIVE ANALYSIS BETWEEN THE MAXIMIZATION OF VOLTAGE STABILITY MARGIN AND LOSS REDUCTION IN DISTRIBUTION SYSTEMS / ANÁLISE COMPARATIVA ENTRE A MAXIMIZAÇÃO DA MARGEM DE POTÊNCIA E MINIMIZAÇÃO DAS PERDAS TÉCNICAS EM SISTEMAS DE DISTRIBUIÇÃO DE ENERGIA ELÉTRICA
The increase of the consumption of electric energy takes the distribution systems to operate next to its limits, which might cause situation of maximum active and reactive power flow in the branches, that is, problems of voltage stability. The change of the topology of the network allows to find a configuration where de voltage stability indexes are far from
Publicado em: 2007
-
41. VOLTAGE CONTROL SENSITIVITY CALCULATION FOR VOLTAGE STABILITY OPERATIONAL REINFORCEMENT / ADEQUAÇÃO DAS AÇÕES DE CONTROLE DE TENSÃO EM SISTEMAS ELÉTRICOS OBJETIVANDO O REFORÇO DAS CONDIÇÕES DE SEGURANÇA DE TENSÃO
The voltage stability problem has been associated with environment questions and lack of financial resources for transmission system expansion. This reality together with the load growth makes the electrical system to be subject of heavy loadings, what can lead to situations of voltage collapse. The development of methods for evaluation of transmission netwo
Publicado em: 2007
-
42. MODELING OF VOLTAGE CONTROL AND MULTIPLE SWING BUSES IN VOLTAGE STABILITY ASSESSMENT / MODELAGEM DO CONTROLE DE TENSÃO POR GERADORES E DE MÚLTIPLAS BARRAS SWING NA AVALIAÇÃO DAS CONDIÇÕES DE ESTABILIDADE DE TENSÃO
O crescente aumento da complexidade dos sistemas elétricos de potência gera a necessidade de desenvolvimento de ferramentas que melhorem as condições de análise. O objetivo deste trabalho é aprimorar a ferramenta computacional de avaliação das condições de segurança (ou estabilidade) de tensão. No que diz respeito às barras associadas ao control
Publicado em: 2007
-
43. An unified framework for the analysis of electrical power systems stability / Uma plataforma unificada para analise de estabilidade de sistemas eletricos de potencia
O estressamento dos sistemas elétricos tem voltado o interesse de engenheiros e pesquisadores para a definição e avaliação de margens de segurança relacionadas a critérios dinâmicos. Neste trabalho é proposta uma ferramenta que permite a avaliação de quatro diferentes critérios de estabilidade: margem de amortecimento, margem oscilatória, margem
Publicado em: 2007
-
44. Mapeamento paramétrico da soldagem GMAW com arames de aço inoxidável ferrítico e austenítico
The use of stabilized ferritic stainless steel wires for GWAW welding in the industry has been increasing in the last years, replacing austenitic stainless steel wires for the welding of stabilized ferritic stainless steel. Besides its lower costs, the ferrític stainless steel weld present a similar, or even superior quality compared to austenitic welds. Co
Publicado em: 2007
-
45. CONTRIBUTIONS TO STUDY OF WIND FARM CONNECTION TO THE UTILITY / CONTRIBUIÇÕES AO ESTUDO DE CONEXÃO DE GERAÇÃO EÓLICA À REDE ELÉTRICA
Distribution systems have not been designed to receive distributed generation (DG) units. The electric energy injection in these systems is safe and reliable if the characteristics regarding of DG interconnection in distribution power systems are considered: (i) Protection; (ii) Stability; (iii) Electric energy market; (iv) Quality of energy. In this work, a
Publicado em: 2007
-
46. Mapeamento do processo mecanizado de soldagem unilateral FCAW com backing cerâmico aplicável no passe de raiz em aço carbono
This work aims to evaluate one-sided welding automatic using the flux cored arc welding process with ceramic backing in the root bead. The tests were performed using a KUKA KR-16, robot for welding in the flat position. The wire is the AWS A5.20-79 E 71T-1, with 1.2 mm diameter, V-groove butt joints were design to be used in steel plate ASTM A-36. The proces
Publicado em: 2007
-
47. Controlador de carregamento de baterias para turbinas eÃlicas de pequeno porte
Electric energy is considered noblest of the forms of currently available secondary energy. It is difficult to imagine modern society without the advent of the electric energy and the ease and comfort it has brought. The technological advances that humanity has made throughout time have greatly contributed to the control and use of electric energy. In the el
Publicado em: 2007
-
48. Melhoria do desempenho do sistema de transmissão do Estado de São Paulo atraves de dispositivos FACTS / Application of FACTS sontrollers for improving the steady-state performance of São Paulo State transmission system
O principal objetivo dessa pesquisa é identificar e quantificar os benefícios da aplicação de dispositivos FACTS para a rede elétrica do Estado de São Paulo no que diz respeito à estabilidade de tensão, controle de tensão, redução de perdas e de intercâmbios de potência reativa com as áreas externas. A rede de São Paulo foi escolhida para esse
Publicado em: 2007