Voltage Stability
Mostrando 1-12 de 111 artigos, teses e dissertações.
-
1. CANTILEVER NANOBIOSENSOR BASED ON THE ENZYME UREASE FOR DETECTION OF HEAVY METALS
Abstract Cantilever nanobiosensors have emerged as an alternative to conventional methods of analysis to monitor heavy metals, which are being highlighted by detecting substances at the micro and nanoscale through the use of sensor layers. In the present study, a new cantilever nanobiosensor was developed functionalized with urease enzyme by self-assembled m
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
2. Contributions of the High Frequency Dynamic Wire Feeding in the GTAW Process for Increased Robustness
Abstract: The GTAW process is recognized as a process of high metallurgical quality, being widely used in the pipelines welding, mainly in the root pass. The relative independence between the heat delivered to the melting pool and the amount of material added helps to control the melting of the material and to avoid the appearance of welding discontinuities
Soldag. insp.. Publicado em: 02/12/2019
-
3. Efeito da Adição de Propileno aos Gases de Proteção Convencionais na Soldagem GMAW Aplicada a Juntas de Topo e Ângulo
Resumo O presente trabalho teve por objetivo avaliar a adição de 1,3% de C3H6 ao CO2 puro e 0,6% de C3H6 à mistura de Ar+25%CO2, na soldagem de aço carbono utilizando o processo Gas Metal Arc Welding (GMAW) aplicado em juntas de topo com chanfro em V e ângulo em T. As soldas foram realizadas utilizando chapas de aço SAE 1020, arame de solda ER70S-6 de
Soldag. insp.. Publicado em: 02/12/2019
-
4. Computational algorithm for stability analysis of distribution networks with distributed generation
Abstract With the insertion of distributed generation in distribution networks, security analysis becomes crucial, in islanded operation or when the system is connected to the grid. Dynamic stability analyses are necessary in order to achieve minimum levels of security and reliability. Such analyses are obtained through the solution of the algebraic-differen
Braz. arch. biol. technol.. Publicado em: 25/11/2019
-
5. Acid Hydrolysis of Regular Corn Starch under External Electric Field
The main objective of the present work is the investigation of a new method for starch hydrolysis. For this, we proposed the acid hydrolysis under the action of an external electric field, able to develop a faster reaction than the conventional one. Corn starch with 18% amylose was subjected to a fixed voltage, varying the external electric field application
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
6. Uma Metodologia para Análise da Distribuição de Contagem dos Picos de Tensão de Reignição para Avaliação da Estabilidade do Processo GMAW Curto-Circuito
Resumo A estabilidade do arco tem sido estudada através de análises estatísticas obtidas dos sinais de tensão de arco e corrente de soldagem. Histogramas e cálculo de estatísticas dos parâmetros tempo de arco aberto e tempo de curto circuito são meios de avaliação da estabilidade dos processos de soldagem. Contudo, estudos relacionados aos picos de
Soldag. insp.. Publicado em: 09/05/2019
-
7. Stability-indicating capillary zone electrophoresis assay for the analysis of linezolid in tablets
A simple and fast alternative methodology using capillary zone electrophoresis (CZE) to analyze linezolid and its cationic photodegradation products in tablets has been developed. The separation was carried out on fused silica capillary and conducted using 100 mM formic acid (pH 3.0) and by applying 30 KV voltage. Detection was performed at UV 254 nm. The op
Braz. J. Pharm. Sci.. Publicado em: 08/04/2019
-
8. Recubrimientos porosos de dióxido de titanio sintetizados por oxidación anódica
ABSTRACT Titanium dioxide is one of the most used materials in heterogeneous photocatalysis due to its commercial availability, low cost, chemical stability, low toxicity and high photocatalytic activity. One of the most efficient and economical methods to obtain TiO2 coatings is the plasma electrolytic oxidation. In this anodization process, a direct curren
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Effect of Synthetic Emulsifier and Natural Biosurfactant on Feed Process and Quality of Pelletized Feed in Broiler Diet
ABSTRACT A feed production trial was conducted to study the effect of synthetic emulsifier and natural biosurfactant the process and quality of pelletized broiler feed. A corn-soy based broiler diet was formulated with fixed ratio 2:1 of oil-to-water with two types of emulsifiers, namely glyceryl polyethylene glycol ricinoleate synthetic emulsifier and lysop
Rev. Bras. Cienc. Avic.. Publicado em: 2017-01
-
10. Stability-indicating comparative methods using mekc and lc for determination of olmesartan medoxomil
A stability-indicating method using MEKC was validated for the analysis of olmesartan medoxomil in tablets. Successful separation was achieved using a fused silica capillary (40 cm x 50 µm i.d.); background electrolyte consisted of a combination of 10 mmol L-1 borate buffer and 5 mmol L-1 anionic detergent sodium dodecyl sulfate (95:5; v/v) pH 6.5; hydrodyn
Quím. Nova. Publicado em: 2013
-
11. Distributed generators performance during short-circuits considering fault ride-through requirements / Desempenho de geradores distribuídos durante curtos-circuitos considerando requisitos de suportabilidade a afundamentos de tensão = : Distributed generators performance during short-circuits considering fault ride-through requirements
The increase of distributed generation penetration in distribution systems not only helps to diversify the electrical matrix but also brings both technical and economic benefits. Yet, it also raises worries related to energy supply reliability. For wind power plants into the medium and high voltage networks there are the grid codes for "Fault Ride-Through" w
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/08/2012
-
12. Desenvolvimento de uma centrífuga de alta rotação eletronicamente monitorada para pesquisa em biologia espacial
This work presents the development of an centrifuge prototype for experiments with vegetables. Its main features are the high mechanical performance and instruments. In more details are presented the specification, implementation, validation and performance assessment through a case study. Its high speed and stability generates a vector component of centrifu
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/03/2012