Void Fraction
Mostrando 1-12 de 67 artigos, teses e dissertações.
-
1. Tensile properties of novel carbon/glass hybrid thermoplastic composite rods under static and fatigue loading
ABSTRACT Novel carbon/glass hybrid thermoplastic composite rods have been developed consisting of a PAN-based carbon fiber, an E-glass fiber, and a thermoplastic matrix. Three types of hybrid rods with different carbon/glass ratios were then fabricated. The surface and cross-sectional morphologies of the hybrid rods were observed using a digital microscope.
Matéria (Rio J.). Publicado em: 20/07/2017
-
2. SELF-SIMILARITY OF VERTICAL BUBBLY JETS
AbstractAn integral model for vertical bubbly jets with nearly monodisperse bubble sizes is presented. The model is based on the Gaussian type self-similarity of mean liquid velocity, bubble velocity and void fraction, as well as on functional relationships for initial liquid jet velocity and radius, bubble diameter and relative velocity. Adjusting the model
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
3. Experimental RTM manufacturing analysis of carbon/epoxy composites for aerospace application
The success of manufacturing composite parts by liquid composite molding processes with RTM depends on tool designs, efficient heat system, a controlled injection pressure, a stabilized vacuum system, besides of a suitable study of the preform lay-up and the resin system choice. This paper reports how to assemble a RTM system in a laboratory scale by specify
Mat. Res.. Publicado em: 05/07/2013
-
4. Avaliação de concreto auto-adensável com agregado reciclado de telha cerâmica / Evaluation of self-compacting concrete produced with the recycled aggregate tile
The increasing demand for raw materials in construction, especially those drawn from nature, is of great concern due to harmful impacts it produces. The use of recycled aggregates can be a sustainable and contribute to the preservation of natural resources, contributing to the sustainable development of the construction industry. The residue from the ceramic
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/08/2012
-
5. Simulações de problemas inversos com aplicações em engenharia nuclear usando técnicas de transporte de partículas neutras monoenergéticas na formulação unidimensional de ordenadas discretas / Simulations of inverse problems with applications one-speed neutral particle transport in slab-geometry discrete ordinates formulation.
Neste trabalho, três técnicas para resolver numericamente problemas inversos de transporte de partículas neutras a uma velocidade para aplicações em engenharia nuclear são desenvolvidas. É fato conhecido que problemas diretos estacionários e monoenergéticos de transporte são caracterizados por estimar o fluxo de partículas como uma função-distri
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/01/2012
-
6. Estudo experimental de bombas de BCS operando com escoamento bifásico gás-líquido / Experimental investigation of two-phase gas-liquid flow performance of electrical submersible pump
The use of electrical submersible pumps (ESP) under gas-liquid flow is very common in the oil industry. At constant liquid flow rate a dramatic degradation on pump head is observed as gas flow rate increases. Natural instabilities of two-phase flow may cause the centrifugal pump to surge at rather low gas void fraction (GVF), as evidenced by a critical point
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/12/2011
-
7. Experimental investigation of horizontal gas-liquid slug flow by means of wire-mesh sensor
The monitoring and visualization of two-phase flow is of great importance either from technical/practical point of view for process control and supervision or from scientific/theoretical point of view, for the understanding of physical phenomenon. A wire-mesh sensor was applied to experimentally investigate two-phase horizontal pipe flow. Furthermore, some p
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011
-
8. Sensor de impedâncias de anéis para medida de fração de vazio em escoamento gás-líquido / Ring impedance sensor for void fraction gas-liquid meter
É proposta uma metodologia de projeto e de calibração de um medidor de fração de vazio para escoamento de gás e líquido operando com o princípio de impedâncias elétricas baseado em simulação numérica. O desenvolvimento do sensor é feito utilizando-se de um software de volumes finitos para a otimização heurística da geometria dos eletrodos e
Publicado em: 2011
-
9. Material void fraction evaluation with mixed neutron beams: theory and numerical experiment
The aim of this article is to describe a mathematical model and an associated numerical method for the basic problem of evaluating the void fraction of a slab material from the responses of a typical source-detector system for backscattered neutrons. The mathematical model and void fraction evaluation method reported herein: i) enable us to treat explicitly
Matéria (Rio de Janeiro). Publicado em: 07/04/2009
-
10. Influence of the glass transition temperature on the maltodextrin agglomeration process. / Estudo da influencia da transição vitrea sobre a instantaneização de maltodextrinas por processo de aglomeração umida.
Maltodextrins are water soluble oligossacharides produced by starch hydrolysis. Their functional characteristics depend on their molecular mass distributions which can be taylormade for specific applications through the control of the process conditions during hydrolysis. Maltodextrin are widely used as ingredient in instant food powder mixes and the knowled
Publicado em: 2007
-
11. Estudo experimental e de simulação da fluidodinâmica de um leito de jorro com tubo Draft
The spouted bed has been used in several processes as drying, granulation, catalytic polymerization, residues treatment and materials coating. This application is due to the excellent fluid-particle contact and to the characteristics of the solids circulation. In spite of its extensive application, the spouted bed has some scale-up limitations, so its necess
Publicado em: 2007
-
12. Estudo experimental e de simulaÃÃo da fluidodinÃmica de um leito de jorro com tubo Draft
The spouted bed has been used in several processes as drying, granulation, catalytic polymerization, residues treatment and materials coating. This application is due to the excellent fluid-particle contact and to the characteristics of the solids circulation. In spite of its extensive application, the spouted bed has some scale-up limitations, so itâs nece
Publicado em: 2007