Viscous Flow
Mostrando 1-12 de 110 artigos, teses e dissertações.
-
1. Rheology of mine tailings deposits for dam break analyses
Abstract This article deals with the rheology of tailings deposits related to dam break analysis. The material used was a fine tailings from iron ore processing. Geotechnical and rheological characterization of these tailings were performed. The rheological characterization consisted of rotational and oscillatory tests. It was observed that the rheological p
REM, Int. Eng. J.. Publicado em: 2021-06
-
2. Numerical Simulation of a Pitching Airfoil Under Dynamic Stall of Low Reynolds Number Flow
ABSTRACT: In this research, viscous, unsteady and turbulent fluid flow is simulated numerically around a pitching NACA0012 airfoil in the dynamic stall area. The Navier-Stokes equations are discretized based on the finite volume method and are solved by the PIMPLE algorithm in the open source software, namely OpenFOAM. The SST k - ω model is used as the tur
J. Aerosp. Technol. Manag.. Publicado em: 14/11/2019
-
3. Characterization of a pediatric rotary blood pump
Abstract Introduction A ventricular assist device (VAD) is an electromechanical pump used to treat heart failures. For designing the physiological control system for a VAD, one needs a mathematical model and its related parameters. This paper presents a characterization procedure for determining the model parameter values of the electrical, mechanical, and
Res. Biomed. Eng.. Publicado em: 29/11/2018
-
4. Improvement of Airfoils Aerodynamic Efficiency by Thermal Camber Phenomenon at Low Reynolds Number
ABSTRACT: In this research, viscous, laminar and steady flow around symmetric and non-symmetric airfoils is simulated at Low Reynolds Number (LRN). Navier-Stokes (N-S) equations are discretized by Finite Volume Method (FVM) and are solved by the SIMPLE algorithm in an open source software, namely OpenFOAM. The main objective of this paper is the introduction
J. Aerosp. Technol. Manag.. Publicado em: 01/11/2018
-
5. Coupled monolithic columns as an alternative for the use of viscous ethanol–water mobile phases on chromatographic fingerprinting complex samples
ABSTRACT Concepts of sustainability have received attention from people involved in investigation of nature-derived matrices. The effects of concomitant pollutant activities are cumulative and harmful to the environment from which these matrices are obtained. High performance liquid chromatography analyses generate millions of litters of chemical waste world
Rev. bras. farmacogn.. Publicado em: 2018-06
-
6. Immersed Boundary Method Based on the Implementation of Conservation Equations along the Boundary using Control-Volume Finite-Element Scheme
ABSTRACT In this study conservation equations were implemented along the boundaries via ghost control-volume immersed boundary method. The control-volume finite-element method was applied on a cartesian grid to simulate 2-D incompressible flow. In this approach, mass and momentum equations were conserved in the whole domain including boundary control volumes
J. Aerosp. Technol. Manag.. Publicado em: 2017-09
-
7. Analog Models of Flanking Structures and a Natural Example in the Quadrilátero Ferrífero, Minas Gerais
ABSTRACT The aim of this study is to present analog models of flanking structures and to analyze the Fábrica Nova synform, Quadrilátero Ferrífero, Minas Gerais, from a geometric point of view. We set up seven models using a linear viscous silicone and produced flanking structures with a shear velocity of 2 cm h-1. At different initial orientations with re
An. Acad. Bras. Ciênc.. Publicado em: 31/07/2017
-
8. CFD 2D Description of Local Flow of Polymer Workpiece through a modified U-Shaped Die During Equal Channel Multiple Angular Extrusion
The present article is focused on a 2D computational fluid mechanics study of local viscous flow dynamics and the formation character of rotary modes of deformation during Equal Channel Multiple Angular Extrusion (ECMAE) of a polymer workpiece fluid model through a U-shaped die with parallel slants in channel intersection zones. The present local flow proble
Mat. Res.. Publicado em: 08/04/2016
-
9. NUMERICAL MODELING OF HEAVY HYDROCARBON LIQUID HEATING
Abstract The results of two-dimensional mathematical modeling of heat and mass transfer in a highly viscous hydrocarbon liquid by inductive and radio-frequency (RF) electromagnetic (EM) heating are presented. The model takes into account the dependence of the liquid's viscosity and thermal conductivity on the temperature and also the presence of thermal conv
Braz. J. Chem. Eng.. Publicado em: 2016-03
-
10. SOLID HOLDUP AND CIRCULATION RATE IN A LIQUID-SOLID CIRCULATING FLUIDIZED BED WITH VISCOUS LIQUID MEDIUM
Abstract Experiments were conducted in a liquid-solid circulating fluidized bed with different viscous liquids and particles to study the hydrodynamics, average solid hold up and solid circulation rate. The effects of operating parameters, i.e., primary liquid flow rate in the riser, auxiliary liquid flow rate, total liquid flow rate and viscosity of the liq
Braz. J. Chem. Eng.. Publicado em: 2015-12
-
11. LIQUID FLOW IN IMPELLER SWEPT REGIONS OF BAFFLED AND UNBAFFLED VESSELS WITH A TURBINE-TYPE AGITATOR
Abstract Liquid flow in the impeller swept region of vessels with a turbine-type agitator was examined for the flow path between the neighboring blades of the rotating impeller. Visualization of the flow and its measurement were done using particle tracking velocimetry with a camera rotating along with the impeller. Internal liquid flow of the impeller diffe
Braz. J. Chem. Eng.. Publicado em: 2015-12
-
12. EFFECT OF NON-DARCY FLOW COEFFICIENT VARIATION DUE TO WATER VAPORIZATION ON WELL PRODUCTIVITY OF GAS CONDENSATE RESERVOIRS
Abstract Well productivity of gas condensate reservoirs is highly affected by near-wellbore phenomena. Inertial force resulting from convective acceleration of fluid particles in the medium, as well as viscous force, determines the flow of gas through porous media at high velocity. Pressure drop builds up the molar content of water in gas by water vaporizati
Braz. J. Chem. Eng.. Publicado em: 2015-03