Vibration Tests
Mostrando 13-24 de 93 artigos, teses e dissertações.
-
13. Efeito da aplicação de vibração mecânica localizada durante o treinamento de força sobre a hipertrofia muscular
Several studies indicate that the addition of vibrations to the strength training (ST) may contribute to the development of muscle strength and athletic performance. The aim of this study was to verify the chronic effect of application of mechanical vibration during ST on muscle hypertrophy. The sample consisted of 20 male volunteers, mean age 21,3 ± 3,02 y
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/04/2012
-
14. Modelagem do comportamento estrutural estático e dinâmico de lajes nervuradas de concreto armado. / Modeling the static and dinamic structural behavior of reinforced concret slabs.
Several researchers have studied the use of reinforced concrete ribbed slabs in civil engineering structural systems that can be viable when the technical and economical point of view is considered. For this reason, a lot of papers were published in the last years based on the experimental and numerical analysis of this slab type. In this context, several sl
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/01/2012
-
15. Manufacturing polycrystalline pellets of natural quartz for applications in thermoluminescence dosimetry
This paper describes the manufacturing process of quartz-pellets and shows their potential use as thermoluminescence dosimeters (TLD) for those applications where low-levels of ionising radiation are present. Two batches of cold-pressed pellets were produced and their resistance were evaluated by vibration tests and weight-loss measurements. The batch manufa
Materials Research. Publicado em: 10/07/2012
-
16. The use of smart structures in the realization of effective semi-active Control systems for vibration reduction
The realization of semi-active actuators by smart structures is discussed. Semi-active actuators have the advantage of consuming much less power than direct-active actuators and are appropriate for the utilization in vibration problems encountered in aeronautical applications, where the loads are in general too high for direct-active actuators to perform. Th
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012
-
17. Vibration energy harvesting using piezoelectric transducer and non-controlled rectifiers circuits
Vibration energy harvesting with piezoelectric materials is of practical interest because of the demand for wireless sensing devices and low-power portable electronics without external power supply. For practical use of vibration energy harvester with piezoelectric materials, it is necessary to process the alternating current (AC) by using different rectifie
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012
-
18. Nonlinear dynamics of a SMA large-scale space structure
Large-scale structures are of special interest of aerospace applications, especially the ones involving smart materials. This paper deals with an archetypal system with two degrees of freedom that resembles the use of SMA elements as vibration isolation systems on a sparse aperture satellite array. The system has SMA elements in two perpendicular directions
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012
-
19. Estudo da relação entre propriedades de compósitos de fricção aplicados a sistemas de freio a disco e a propensão à ocorrência de Squeal Noise
Automotive brake systems are very often susceptible to generate high frequency noise as a result of a self excited vibration. This phenomenon is generically nominated brake squeal noise and is the subject of many studies which intend to identify and describe its exciting mechanism and to propose counter measures to avoid its occurrence. One key subject yet t
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
20. Estudo do ruído de rodagem estrutural através da análise dos caminhos de transferência de energia - TPA / Structure-borne road noise study using transfer path analysis, TPA
The road noise, vibration and harshness (Road NVH) present from 20 Hz to 1000 Hz approximately, begins from the tires vibration and acoustic propagation and their interactions with the road surfaces. In these noise sources, both structural-borne and air-borne noise contributions are relevant to vehicle refinement. The constant efforts to study the vehicle as
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/05/2011
-
21. MONITORING FLEXIBLE RISERS WITH OPTICAL FIBER SENSORS / MONITORAMENTO DE RISERS FLEXÍVEIS COM SENSORES A FIBRA ÓPTICA
The interest in structural health monitoring of flexible risers has grown significantly in recent years. For ducts that are already reaching their design life, monitoring systems can provide early warnings of potential failures and also assist the operator in scheduling downtime. Different techniques are being tested by operators of flexible pipes such as au
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/04/2011
-
22. A durabilidade da carroceria de um veículo de passeio simulada no laboratório
Durability tests are part of the experimental development of a product aiming to submit it to the service conditions by evaluating their performance for a specified time. Over the years, these tests initially conducted on public roads have migrated to proving grounds specially designed to reproduce certain service conditions and finally to the lab environmen
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/03/2011
-
23. The effectiveness of chemical denture cleansers and ultrasonic device in biofilm removal from complete dentures
Adequate denture hygiene can prevent and treat infection in edentulous patients. They are usually elderly and have difficulty for brushing their teeth. OBJECTIVE: This study evaluated the efficacy of complete denture biofilm removal using chemical (alkaline peroxide-effervescent tablets), mechanical (ultrasonic) and combined (association of the effervescent
Journal of Applied Oral Science. Publicado em: 2011-12
-
24. Structure-borne transmissibility evaluation through modeling and analysis of aircraft vibration dampers
Abstract In the aircraft industry a great practical relevance is given to the extensive use of vibration dampers between fuselage and interior panels. The proper representation of these isolators in computer models is of vital importance for the accurate evaluation of the vibration transmission paths for interior noise prediction. In general, simplified mode
J. Aerosp. Technol. Manag.. Publicado em: 2011-08