Variable Transformation
Mostrando 1-12 de 138 artigos, teses e dissertações.
-
1. Optimization of shells modeled using NURBS subjected to a dynamic loading condition
Abstract This study presents an optimization method for the thickness of shell elements subjected to dynamic loads. Structural analyses were carried out using the finite element method. The analyzed domains were modeled using NURBS, and meshes were generated using a transformation of the parametric domain into the geometric domain via a geometric function. T
REM, Int. Eng. J.. Publicado em: 2020-03
-
2. Prediction of Properties of Sclerolobium paniculatum and Qualea grandiflora Charcoal
ABSTRACT There is a lack of techniques for the rapid and accurate determination of wood quality for charcoal production with good energy characteristics. The association of NIR spectroscopy and important charcoal parameters allows the prediction of these characteristics. This is a fast method that does not require sample preparation before the reading. The
Floresta Ambient.. Publicado em: 14/02/2019
-
3. Hankel transformation method for solving the Westergaard problem for point, line and distributed loads on elastic half-space
Abstract The Hankel transformation method was used in this work to determine the normal and shear stress distributions due to point, line and distributed loads applied to the surface of an elastic media. The elastic media considered in this study was assumed to be inextensible in the horizontal directions, and the only non-vanishing displacement component is
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
4. Obtención de aceros de baja aleación con diferentes contenidos de Ni y similares microestructuras y propiedades mecánicas
ABSTRACT Low alloy steels are used in many applications in the oil and gas industry. The addition of Ni in these steels improves their low temperature fracture toughness and hardenability, with a low penalty on weldability. However, ISO 15156-2 standard restricts Ni content up to a 1 wt% limit, requiring additional and expensive tests if higher Ni steels are
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Analytical Solution for Optimal Low-Thrust Limited-Power Transfers Between Non-Coplanar Coaxial Orbits
ABSTRACT: In this paper, an analytical solution for time-fixed optimal low-thrust limited-power transfers (no rendezvous) between elliptic coaxial non-coplanar orbits in an inverse-square force field is presented. Two particular classes of maneuvers are related to such transfers: maneuvers with change in the inclination of the orbital plane and maneuvers wit
J. Aerosp. Technol. Manag.. Publicado em: 03/05/2018
-
6. Effects of Composition and Thermal Treatment of Cu-Al-Zn Alloys with Low Content of Al on their Shape-memory Properties
Two Cu-Zn-Al alloys with variable content of Zn (25 and 30 wt%) and constant Al content (4 wt%) prepared by induction melting of pure metals and hot rolled into strips of 0.5 mm thickness were thermally processed by using three different heat treatments: direct quenching, step-quenching and up-quenching with boiling water and room temperature water as the qu
Mat. Res.. Publicado em: 07/08/2017
-
7. Effect of Spun Velocities and Composition on the R‒phase and Thermomechanical Behavior in Ti‒Ni Ribbons Electrically Heated
This work deals with structural, electrical and mechanical characterization of Ti‒50.13Ni and Ti‒49.62Ni (at.%) shape memory alloys (SMAs) fabricated at different circumferential wheel velocities. The effect of wheel velocity, chemical composition and heat treatments are investigated. The characterization of crystallographic phases of the Ti‒Ni ribbons
Mat. Res.. Publicado em: 08/04/2016
-
8. ROBUST CONTROL OF WIENER SYSTEMS: APPLICATION TO A pH NEUTRALIZATION PROCESS
Abstract In this paper, the robustness of a typical control scheme for Wiener systems is studied. These systems consist of the cascade connection of a linear time invariant system and a static nonlinearity. To control this kind of systems, several approaches were discussed in the literature. Most of these control schemes involve transformation of the measure
Braz. J. Chem. Eng.. Publicado em: 2016-03
-
9. Transverse Motions of Rectangular Plates Resting on Elastic Foundation and Under Concentrated Masses Moving at Varying Velocities
AbstractThis study concerns the dynamic characteristics of a prestressed isotropic, rectangular plate continuously supported by an elastic foundation and carrying accelerating mass M. Closed form solutions of the governing fourth order partial differential equations with variable and singular coefficients are presented. For the two-dimensional plate problem,
Lat. Am. j. solids struct.. Publicado em: 2015-07
-
10. Deflection profile analysis of beams on two-parameter elastic subgrade
A procedure involving spectral Galerkin and integral transformation methods has been developed and applied to treat the problem of the dynamic deflections of beam structure resting on bi-parametric elastic subgrade and subjected to travelling loads. The case of the response to moving constant loads of this slender member is first investigated and a closed fo
Lat. Am. j. solids struct.. Publicado em: 2013-03
-
11. Transformações em modelos de séries temporais / Transformations in time series models
Cordeiro and Andrade (2009) incorporate the idea of transforming the response variable to the GARMA model, generalized autoregressive moving average, introduced by Benjamin et al. (2003), thus developing the TGARMA model, transformed generalized autoregressive moving average. The goal of this thesis is to develop the TGARMA model introduced by Cordeiro and A
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/05/2012
-
12. A transformation of variables technique applicable to the boundary element method to simulate a special class of diffusive-advective potential problems
This paper describes a novel Boundary Element Technique developed for application to one-dimensional and a class of two-dimensional diffusive-advective potential problems. It is based on transformation of variable procedure to establish an integral equation inverse sentence, dealing only with boundary variables, using a fundamental solution associated with a
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-03