Unstructured Meshes
Mostrando 13-24 de 33 artigos, teses e dissertações.
-
13. A comparative study of implicit and explicit methods using unstructured voronoi meshes in petroleum reservoir simulation
This work presents a comparative study among three linearization schemes widely used in petroleum reservoir simulation, namely the Implicit Pressure Explicit Saturation (IMPES), Fully Implicit (FI) and Adaptive Implicit Method (AIM). Attention is given to the criterion used for switching from IMPES to FI and vice-versa. The black-oil model considering the oi
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-12
-
14. Métodos de Elementos Finitos e Diferenças Finitas para o Problema de Helmholtz / Finite Elements and Finite Difference Methods for the Helmholtz Equation
It is well known that classical finite elements or finite difference methods for Helmholtz problem present pollution effects that can severely deteriorate the quality of the approximate solution. To control pollution effects is especially difficult on non uniform meshes. For uniform meshes of square elements pollution effects can be minimized with the Quasi
Publicado em: 2009
-
15. The use of the perturbative methods for the sensi-tivity analysis in hyperthermic problems caused by the laser sources in the treatment of tumors / Uso de métodos perturbativos para análise de sensibi-lidade em problemas de hipertermia causada por fontes de laser usadas no tratamento de tumores
The hyperthermic procedures available for therapeutic treatments of tumors can cause thermal damage in the adjacent living tissues and it is necessary to have an effective control systems. The temperature distribution inside the tissue must be controlled in order to avoid thermal damages to the healthy tissues in the neighborhood of the tumor. Numeri-cal sim
Publicado em: 2009
-
16. Three-dimensional flow calculations of axial compressors and turbines using CFD techniques.
With the advent of powerful computer hardware, Computational Fluid Dynamics (CFD) has been vastly used by researches and scientists to investigate flow behavior and its properties. The cost of CFD simulation is very small compared to the experimental arsenal as test facilities and wind-tunnels. In the last years many CFD commercial packages were developed an
Publicado em: 2009
-
17. Esquema numérico com reconstrução mínimos quadrados de alta ordem em malhas não-estruturadas para a formulação euleriana do transporte de partículas / Numerical scheme with high order least square reconstruction on unstructured grid to eulerian formulation of the particle transport
The particle transport study has a fundamental importance in diverse research area like in the icing accretion on an aircraft because that can affect its sustentation and stability. The concern is so big that many researches have been carried through, resulting in computational codes like the LEWICE in the United States, TRAJICE in the United Kingdom, ONERA
Publicado em: 2008
-
18. Ferramentas computacionais para a anÃlise de dutos com defeitos de corrosÃo
Pipelines are one of the safest means for transport of petroleum and gas, and the one with the smallest risk to the environment. They also possess high efficiency and productivity. In spite of their exceptional capabilities, they are also a great source of concern of the petroleum companies, since they can be subjected to several types defects, in particular
Publicado em: 2008
-
19. A multigrid-DDM schur elliptic equation solver in unstructured meshes
Publicado em: 2007
-
20. Advanced turbulence modelling for complex aerospace applications.
The objective of the present research work consists in studying complex aerodynamic flows about typical aerospace configuration, in which turbulence effects play a fundamental role. Such study is performed with an available computational tool that is being developed at CTA/IAE. This is a finite-volume code for unstructured 3-D meshes that solves the compress
Publicado em: 2007
-
21. Simulação numérica para difusão anisotrópica / Numerical simulation to anisotropic diffusion
The present work build a computational model using the finite volumes method for unstructured meshes, with the purpose of calculating the hydraulic load in a porous medium, considering it material non - homogeneous and anisotropic. The Anisotropy is a characteristic of many materials found in the nature and it depends on the property studied in this material
Publicado em: 2006
-
22. Theoretical-experimental analysis of shrinkage : study of driyng of bananas / Analise teorico-experimental do encolhimento : estudo da secagem de banana
The drying process may induce collateral effects in the dry material, such as the volume reduction. The objectives of this study are to investigate the characteristics of the shrinking process and to consider a strategy for inclusion of these effects in a drying simulation. Banana was chosen as a case study due to its importance in Brazil and to the existenc
Publicado em: 2006
-
23. An axisymmetric finite volume formulation for the solution of heat conduction problems using unstructured meshes
In this work, a finite volume formulation developed for two-dimensional models is extended to deal with axisymmetric models of heat conduction applications. This formulation uses a vertex centered finite volume method and it was implemented using an edge-based data structure. The time and domain discretization using triangular meshes is described in details,
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2005-12
-
24. VISUALIZAÇÃO VOLUMÉTRICA INTERATIVA DE MALHAS NÃO-ESTRUTURADAS UTILIZANDO PLACAS GRÁFICAS PROGRAMÁVEIS / INTERACTIVE VOLUME VISUALIZATION OF UNSTRUCTURED MESHES USING PROGRAMMABLE GRAPHICS CARDS
A visualização volumétrica é uma importante técnica para a exploração de dados tridimensionais complexos, como, por exemplo, o resultado de análises numéricas usando o método dos elementos finitos. A aplicação eficiente dessa técnica a malhas não-estruturadas tem sido uma importante área de pesquisa nos últimos anos. Há dois métodos básico
Publicado em: 2005