Unsteady State
Mostrando 13-24 de 44 artigos, teses e dissertações.
-
13. Otimização e dinâmica dos fluidos computacional aplicadas a turbinas eólicas
The present work consists in the application of optimization methods and computational fluid dynamics to wind turbines. The massive growth in renewable energies demands more powerful turbines and more accuracy in their design and analysis. This work has three objectives: optimization of an airfoil for wind turbines, simulation of a wind turbine airfoil in de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
14. Simulação de grandes escalas para análise numérica da esteira aerodinâmica da turbina eólica NREL UAE Phase VI
The Unsteady Aerodynamics Experiment Phase VI, which has been carried out in 2000 by the US National Renewable Energy Laboratory (NREL) at the NASA Ames wind tunnel, has been numerically reproduced. The purpose of this work is to study the characteristics of the wind wake produced by the 10 meter two bladed wind turbine, operating at a constant rotational sp
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
15. Transient solidification of alloys of the monotectic AI-Bi, AI-Pb and AI-In systems / Solidificação transitória de ligas dos sistemas monotéticos AI-Bi, AI-Pb e AI-In
Aluminum alloys dispersed with bismuth, lead and indium show promising applications in wearresistant automotive components. Such dispersions of low melting temperature elements decrease hardness and flow easily under sliding conditions, resulting in favorable tribological behavior. Much research has been devoted in order to better comprehend the distinct m
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/04/2011
-
16. Evolution of eutectic spacing during unidirectional solidification of Al-Ni alloys
Hypoeutectic Al-Ni alloys show a ductile phase α distributed with a β phase Al3Ni fragile where β serves as reinforcement of the structure of the material. The eutectic composition alloys obey the relationship: λ2.v = C, where λ is the eutectic spacing, v is a tip growth rate and C is a constant. The aim of this study is to establish correlations betwee
Materials Research. Publicado em: 27/05/2011
-
17. Nonlinear turbulent transonic flow phenomena influence on aeroelastic stability analysis.
The present work is aimed at studying the influence of viscous effects in transonic aeroelastic analyses. To achieve this goal, a two-dimensional and viscous aeroelastic computational solver, for CAE analysis, is developed, which uses unstructured computational meshes and which is able to capture the main aeroelastic phenomena relevant in the transonic regim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/12/2010
-
18. Nonlinear turbulent transonic flow phenomena influence on aeroelastic stability analysis.
The present work is aimed at studying the influence of viscous effects in transonic aeroelastic analyses. To achieve this goal, a two-dimensional and viscous aeroelastic computational solver, for CAE analysis, is developed, which uses unstructured computational meshes and which is able to capture the main aeroelastic phenomena relevant in the transonic regim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/12/2010
-
19. Modelling the steady state and dynamic conditions of a biotrickling filter treating styrene and acetone in air
The aim of this work was the study a trickling biofilter, where water was circulated throughout the bed. In the first steady state experiment, the packing materials used were 25mm Pall rings. The airflow rate was increased gradually and the concentration of styrene in the air stream was held constant. In the second experiment, 15mm Pall rings were used. In t
Brazilian Archives of Biology and Technology. Publicado em: 2010-10
-
20. Turbulent natural convection in enclosures using large-eddy simulation with localized heating from horizontal bottom surface and cooling from vertical surfaces
Turbulent natural convection of air that happens into inner square cavity with localized heating from horizontal bottom surface has been numerically investigated. Localized heating is simulated by a centrally located heat source on the bottom wall, and two values of the dimensionless heat source length ? are considered in the present work. Solutions are obta
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-09
-
21. Development of numerical model for the simulation of water-quality at rivers, using the software Vensim PLE® / Desenvolvimento de modelo numérico para a simulação da qualidade da água em rios utilizando o software Vensim PLE
The water-quality modeling is an indispensable tool for the water resource planning and management. However, the current available models for the simulation of water-quality, as the QUAL2K, present structural and functional limitations. With the purpose of offering a tool that facing those deficiencies, a model for time-variable simulation of the rivers wate
Publicado em: 2009
-
22. Parametros termicos e estruturais em ferros fundidos cinzento e nodular solidificados em moldes de areia e unidirecionalmente / Thermal and structural parameters in gray and ductile cast irons solidified in sand molds and under unidirectional conditions
In the present work unsteady state unidirectional solidification of a hypoeutectic gray cast iron and of a eutectic ductile cast iron is applied to analyze the influence of the process parameters an the flake and nodule count. For comparison purpose some samples were cast in sand molds. The experimental results of temperature variation in the casting were us
Publicado em: 2009
-
23. Dynamic optimization of the benzene extractive distillation unit
A mathematical model has been developed for describing the dynamic operation of the N-formylmorpholine extractive distillation column and the corresponding solvent recovery column in the benzene extraction plant. The NRTL equation was used to calculate the equilibrium and thermodynamic properties of the mixtures. The validity of the model in terms of tempera
Brazilian Journal of Chemical Engineering. Publicado em: 2008-12
-
24. On hydromagnetic rotating flow of a dusty fluid near a pulsating plate
An initial value problem is solved for the motion of an incompressible viscous conducting fluid with embedded small inert spherical particles bounded by an infinite rigid non-conducting plate. Both the plate and the fluid are in a state of solid-body rotation with constant angular velocity about an axis normal to the plate. The unsteady flow is generated in
Computational & Applied Mathematics. Publicado em: 2008