Uniones
Mostrando 1-12 de 14 artigos, teses e dissertações.
-
1. Estudio de propiedades mecánicas locales de uniones soldadas por fricción agitación (FSW) en AA6061-T6 mediante Small Punch Test (SPT)
ABSTRACT Friction Stir Welding (FSW) is a solid state process that has reach a strong technological impact in welding of aluminum alloys. Among its advantages, it may include the ability of joining materials that are difficult to weld by fusion. In welding of heat treatable aluminum alloys, some degradation in metallurgical properties is observed, so welds s
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Análisis de la corrosión de uniones por soldadura fuerte de compósitos matriz cobre
ABSTRACT This work presents an electrochemical corrosion study in synthetic seawater of the dissimilar joint of TiC/Cu composite by brazing technique. Composites were machined by liquid infiltration without external pressure. This composite were joined with copper using a filler material constituted by an alloy of silver - copper and titanium powder. The com
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Vida a fatiga de uniones soldadas mediante PAW de aceros microaleados al boro
ABSTRACT In the last years microalloyed boron steels have been adopted in the automotive industry to achieve weight reductions. Namely, they are used as load-bearing elements such as pillars and reinforcements, in a quenched and tempered (QT) condition with tensile strength ranging from 800 to 1300 MPa. Dual-Phase (DP) steels have also been introduced in thi
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Comportamiento frente a la corrosión de uniones soldadas por fricción agitación de AA7075-T651: Evaluación galvánica
ABSTRACT Friction Stir Welding (FSW) is a novel solid-phase welding process, which has proved to have a great potential for the realization of welded joints in materials with poor weldability such as heat-treatable aluminum alloys. The aerospace industry has incorporated this process for the manufacture of structural elements, using known high strength alloy
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Identificación de Fases y Precipitados por MFA en Uniones de Acero Inoxidable Dúplex
Abstract Atomic Force Microscopy (AFM) is a characterization technique that generates topographic images of surfaces at very high resolutions, and operates recording details of surface relief of material with a cantilever that moves on the sample, while a piezoelectric detector monitors changes in height. It acquires relevance in the field of identification
Soldag. insp.. Publicado em: 2016-06
-
6. Evolución Microestructural en Uniones de la Aleación Ti-6Al-4V Mediante el Proceso de Soldadura de Punto por Fricción-agitación
Abstract Friction stir spot welding (FSSW) is a process of recent development and interest, mainly in titanium alloys, since there are previous studies of aluminum alloys, magnesium, steel and polymers. Titanium alloys have a wide range of applications in the aeronautical industry, mainly in the components of commercial aircrafts as landing gear. Therefore,
Soldag. insp.. Publicado em: 2016-06
-
7. Efecto del procedimiento de soldadura por FSW en la evolución temporal de las propiedades en uniones de AA 7075-T651
It was studied the effect of the welding procedure on the temporal evolution of the mechanical properties in AA 7075-T651 friction stir welded joints. To vary the heat input samples with different parameters (rotation and welding speed) were welded. Thermal cycles were acquired by means of thermocouples instrumented on the samples, obtaining the heat input f
Soldag. insp.. Publicado em: 2014-12
-
8. Marco Lucchesi y los ojos del desierto: la experiencia poética del caminante / Marco Lucchesi e Os olhos do deserto: a experiência poética do caminhante
Marco Lucchesi, en Los ojos del desierto (2000) emprende un doble viaje: el primero es físico, por las altitudes del desierto oriental; y el otro es interior, marcado por la sensibilidad y por el decir poético. La diversidad de paisajes confrontadas demandó variadas travesías teóricas. De Gaston Bachelard hasta Néstor Canclini, y pasando por Georges Ba
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/03/2012
-
9. Tensiones residuales en uniones soldadas por FSW en aluminio 7075-T651
Residual stresses could be a relevant issue in the structural integrity of a component in service and usually have a major influence on their fatigue life, among other failure mechanisms. In recent years Friction-Stir Welding (FSW) has revolutionized the welding technology. Its main application has been given in aluminum alloys, but nowadays can be applicabl
Soldag. insp.. Publicado em: 2012-12
-
10. Influencia de la cantidad de O2 adicionado al CO2 en el gas de protección sobre la microestructura del metal depositado en uniones soldadas de bordes rectos en aceros de bajo contenido de carbono con el proceso GMAW
The presence of acicular ferrite (AF) in the microstructure of weld bead, in a specified range of values, increase considerably the toughness of welded joints. The present paper, for that reason, study the relationship between the acicular ferrite quantity in the deposited metal and the oxygen present in the active gas mixture of CO2+O2, during the execution
Soldagem & Inspeção. Publicado em: 2010-12
-
11. Empleo de explosivos en el alivio de tensiones residuales de la zona de influencia térmica de uniones soldadas
In this paper, the effect of explosive charges as a method to reduce the residual stresses in the heated zone of welded unions was studied. A comparative analysis of two geometries of the explosive charge applied on welded unions was made: linear and sinusoidal. The comparative results obtained before and after the explosive treatment demonstrate its effecti
Soldagem & Inspeção. Publicado em: 2009-06
-
12. Efecto del procedimiento de soldadura sobre las propiedades de uniones soldadas de aceros microaleados para cañería
The objective of this work was, in this first step, to compare mechanical property and microstructure of the steel HIC, alloyed with Nb-Ti-Cu-Ni, corrosion resistant, to those of a normal steel NOR, microlloyed with Nb-V-Ti, characterized through chemical analysis, hardness measurements, metallographic studies and tensile and Charpy-V properties. The preheat
Soldagem & Inspeção. Publicado em: 2009-03