Ultrasonic Wave Velocity
Mostrando 1-12 de 21 artigos, teses e dissertações.
-
1. Estimação da profundidade de fissuras em concreto através da velocidade de ondas ultrassônicas
RESUMO As fissuras são as manifestações patológicas mais recorrentes no concreto, devido as diferentes formas de exposição que o material está sujeito. Neste cenário, é importante que as edificações passem por inspeções através de diferentes métodos, dentre os quais os ensaios não destrutivos (END) aparecem como ferramenta alternativa. Dentre
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Impacto nas propriedades mecânicas do concreto curado sob baixas temperaturas
RESUMO O processo de cura das matrizes cimentícias é muito importante na determinação das suas propriedades no estado endurecido. Nessas circunstâncias, o concreto pode sofrer sérias avarias quando exposto às severas variações térmicas. As baixas temperaturas de cura em que as matrizes cimentícias são expostas podem influenciar nas propriedades n
Matéria (Rio J.). Publicado em: 10/06/2019
-
3. Ultrasonic method of microvibration detection: part II - additional processing method and applications
Abstract Introduction In the last 28 years, the scientific community has been using elastography to evaluate the mechanical properties of biological tissue. The aim of this work was the optimization of the UDmV method, presented in Part I of the series, by means of modifying the technique employed to generate the reference sine and cosine functions, used fo
Res. Biomed. Eng.. Publicado em: 17/08/2017
-
4. DESENVOLVIMENTO DE UMA TÉCNICA ULTRASSÔNICA PARA AVALIAR TEORES DE ÓLEO E GRAXA EM EFLUENTES DE BIOCOMBUSTÍVEIS
Ultrasound as a metrology tool has many applications in health care, industrial, and chemical analyses. Ultrasonic techniques are rapid, low-cost, non-invasive, and highly repeatable. Although ultrasound can be used to measure emulsions, no effort had been made thus far to optimize its sensitivity for metrological analysis. In this work, a technique for anal
Quím. Nova. Publicado em: 2015-12
-
5. Experimentos virtuales sobre una mosca vagabunda: más allá de la solución de Neumann
We extend the traditional problem of calculating the distance of travel of a fly that is moving with constant speed along a straight path between two trains that are approaching one another. We found two analytical solutions for the traditional problem and we propose a generalization to the accelerated motion of the trains through a simulation. With this pro
Rev. Bras. Ensino Fís.. Publicado em: 2013-06
-
6. Avaliação de concreto auto-adensável com agregado reciclado de telha cerâmica / Evaluation of self-compacting concrete produced with the recycled aggregate tile
The increasing demand for raw materials in construction, especially those drawn from nature, is of great concern due to harmful impacts it produces. The use of recycled aggregates can be a sustainable and contribute to the preservation of natural resources, contributing to the sustainable development of the construction industry. The residue from the ceramic
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/08/2012
-
7. Simulação da propagação de ondas ultrassônicas longitudinais em materiais estruturais aeroespaciais / Simulating the propagation of longitudinal ultrasonic waves in aerospace structural materials
The use of composite materials in the aerospace industry is increasing due to its low ratio between density and mechanical strength. To perform non-destructive testing using ultrasound, it is necessary to know the sound velocity in these materials. It is not always possible to manufacture physical prototypes during the development of a project because of tim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2012
-
8. Medição da velocidade da onda ultrassônica longitudinal em compósitos de fibra de carbono/epóxi / Measurement of the velocity of ultrasonic longitudinal wave in composite carbon fiber/epoxy
O uso dos materiais compósitos pela indústria aeronáutica tem ganhado cada vez mais espaço, sendo, portanto, de grande importância o conhecimento de suas características tanto na fase de projeto quanto na de manutenção. A presença de falhas e tensões não identificadas durante o processo de fabricação ou de manutenção pode significar perdas soc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/07/2012
-
9. Acoustic beam modeling of ultrasonic transducers and arrays using the impulse response and the discrete representation methods
The impulse response of the velocity potential and the discrete representation methods were used in order to model the acoustic field radiated by ultrasonic transducers and arrays. The first method deals with the calculation of the exact impulse response, in which solutions are possible only for simple geometries, such as the circular piston. The second meth
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-12
-
10. Influência de idade da árvore na velocidade de propagação de ondas de ultrassom em peças estruturais de madeira de reflorestamento / Influence of the tree age on the velocity of ultrasonic wave propagation and on the modulus of elasticity
Em 2007 foi aprovada, pela Associação Brasileira de Normas Técnicas (ABNT), norma para classificação de madeira de dicotiledônea (NBR 15521, 2007). Essa norma, elaborada com base em ensaios de espécies tropicais com idade média de 45 anos, propõe a classificação de peças estruturais por meio de faixas de velocidade de propagação de ondas de ult
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/07/2010
-
11. Estudo da correlação entre resistência mecânica e velocidade ultrassônica para um material terroso
This dissertation presents the studies carried out on the applicability of ultrasound as a non-destructive evaluation method of the structural conditions of earth structures designed to building rammed earth. To this purpose the ultrasound was defined as a proposal for utilization of a non-destructive method on the evaluation of the relation of earthy materi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/05/2009
-
12. Simultaneous measurements of the solid particles velocity and concentration profiles in two phase flow by pulsed ultrasonic doppler velocimetry
In this experimental study, the pulsed ultrasonic Doppler velocimetry was used to measure simultaneously the local velocity and the local concentration in a flow of solid-liquid suspension in a horizontal pipe. In order to distinguish between the Doppler signals coming from the continuous phase, water and those of the glass bead particles larger than the Kol
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-12