Twin
Mostrando 13-24 de 569 artigos, teses e dissertações.
-
13. Comparação dos parâmetros bioquímicos entre gestação única e gemelar de ovelhas da raça Dorper durante gestação, parto e pós-parto
RESUMO Nas ovelhas, a demanda de nutrientes aumenta durante a gestação, especialmente nas últimas seis semanas, quando ocorre maior desenvolvimento do feto. Os objetivos deste trabalho foram estudar o perfil bioquímico de ovelhas durante a gestação e no periparto imediato, comparando-se gestação única com gemelar. Foram utilizadas 60 ovelhas, Dorper
Arq. Bras. Med. Vet. Zootec.. Publicado em: 10/10/2019
-
14. Atomization Characteristics of Droplet and Morphologies of Arc Sprayed Ni-Al Particles and Composition Coatings
Droplet atomization characteristics and its morphology in twin-wire arc sprayed (TWAS) Ni-Al were explored in depth. Both numerical model and theoretical method were built for calculating the process of the droplet deformation and breakup in air flow, which based on the standard k-ε model and the volume of fluid (VOF) dual-phase flow model. The atomization
Mat. Res.. Publicado em: 23/09/2019
-
15. Crystallographic texture and microtexture of copper drawn at 295 K and 77 K
ABSTRACT The pure copper wires were wiredrawn at cryogenic and room temperatures. After deformation they presented important and significant differences in their crystallographic textures and microstructures. Therefore, this study aimed to investigate the evolution of crystallographic texture of pure copper drawn at temperatures of 295 K and 77 K and correla
Matéria (Rio J.). Publicado em: 16/09/2019
-
16. Stabilization effect of kraft lignin into PBAT:Thermal analyses approach
ABSTRACT Sterically hindered phenols are an important class of synthetic antioxidants for polymers, commonly incorporated to inhibit polyolefins or polyesters oxidation. However, synthetic antioxidants use is under restricted regulation due to their potential health risk and environmental impacts. Thus, great interest has been attracted to the phenol-based n
Matéria (Rio J.). Publicado em: 16/09/2019
-
17. Avaliação do efeito do agente compatibilizante (PP-g-MA) em misturas PP/Amido termoplástico
RESUMO O crescente desperdício de materiais plásticos no meio ambiente juntamente com a preocupação com a futura escassez do petróleo tem aumentado o interesse por polímeros biodegradáveis, como o amido. Nos últimos anos, o amido tem sido utilizado em misturas com diferentes polímeros sintéticos. Essas misturas têm sido compatibilizadas por meio d
Matéria (Rio J.). Publicado em: 16/09/2019
-
18. Properties and Morphology of Polypropylene/Big Bags Compounds
In this work, compounds based on two grades of polypropylene (PP), i.e., PP H503 or PP H103 with residues of Big bag fabrics (RBB) were processed in a corrotational twin screw extruder with RBB content ranging from 10% to 50% of the weight. Then, their thermal properties were investigated through Differential Scanning Calorimetry (DSC) and Thermogravimetry (
Mat. Res.. Publicado em: 05/09/2019
-
19. Perspectivas do Corredor Bioceânico para o Desenvolvimento Local no estado de MS: o caso de Porto Murtinho
Resumo: Este artigo versa sobre o Corredor Bioceânico, fomentando como tal rota pode contribuir para o desenvolvimento local de Mato Grosso do Sul, mais especificamente na cidade de Porto Murtinho, no olhar voltado ao desenvolvimento turístico. O trabalho é fundamentado inicialmente nos impactos da grande obra da ponte binacional entre Porto Murtinho, no
Interações (Campo Grande). Publicado em: 05/09/2019
-
20. PERFIL METABÓLICO DURANTE O PERIPARTO DE OVELHAS DA RAÇA SANTA INÊS COM GESTAÇÃO SIMPLES E MÚLTIPLA
Resumo O perfil metabólico é uma importante ferramenta no diagnóstico de doenças metabólicas e monitoramento nutricional de animais de produção. Este trabalho teve por objetivo avaliar o escore corporal e perfil metabólico de ovelhas da raça Santa Inês criadas em sistema de semiconfinamento, ao longo do periparto, comparando esses parâmetros entre
Ciênc. anim. bras.. Publicado em: 22/08/2019
-
21. Fertilization of Eucalyptus Stands at Advanced Ages in Minas Gerais, Brazil
ABSTRACT This study evaluated the response to fertilization at advanced ages in Eucalyptus stands. Fertilization at advanced ages (FA) was applied in stands managed according to tall shaft and coppice regimes. All stands received operational fertilization from the company. It was used as the basis to the network of continuous forestry inventory plots (P-IFC)
Floresta Ambient.. Publicado em: 01/07/2019
-
22. Toughening of bio-PE upon addition of PCL and PEgAA
Abstract Researches of polymer blends based on biological and biodegradable polymers appear as a viable alternative to develop environmentally friendly materials. Therefore, the aim of this research was to produce compounds made with biological polyethylene, i.e., Biopolyethylene, Bio-PE, added to the biodegradable Polycaprolactone (PCL) and functionalized b
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
23. Rheological characteristics PBAT/organoclay compounds
Abstract The rheological behavior of poly (butylene adipate-co-terephthalate) (PBAT) and its composites prepared with three different organoclays was investigated. Composites containing up to 7.5%, w/w organoclay, were prepared by two routes: (a) direct melt blending in an internal laboratory mixer with high intensity rotors and (b) concentrates (prepared in
REM, Int. Eng. J.. Publicado em: 2019-06
-
24. Ascorbic acid encapsulation in a glassy carbohydrate matrix via hot melt extrusion: Preparation and characterization
Abstract Hot melt extrusion technology using a twin-screw extruder was employed to obtain maltodextrin, maltodextrin-gum arabic and maltodextrin-trehalose based glassy extrudates containing ascorbic acid (dispersed phase). Ascorbic acid payload of all three formulations was more than 15.67 g/100 g extrudates while the ascorbic acid yield was above 97%. The g
Food Sci. Technol. Publicado em: 16/05/2019