Tungsten
Mostrando 1-12 de 285 artigos, teses e dissertações.
-
1. Role of the reducing agent in tungsten extraction by chlorination with chlorine from an ore enriched by physical means
Abstract The effect of three reducing agents (sulphur dioxide, pyrite and carbon) on tungsten extraction from a scheelite-wolframite concentrate with chlorine gas was assessed. A low-grade ore (0.9% w/w WO3) was collected in the San Martín department, San Luis Province, Argentina, and subsequently enriched by physical means (65.73% w/w WO3). The minerals id
REM - International Engineering Journal. Publicado em: 2022
-
2. Systematic review and meta-analysis of welding procedures in one-piece cast implant-supported frameworks
Abstract The objective of this systematic review and meta-analysis was to evaluate the effect of welding techniques on implant-supported prostheses and determine whether they contribute to a better adaptation compared with a one-piece cast. A search was conducted using the PubMed/MEDLINE, Embase, and Cochrane Library databases, and articles published until N
Braz. oral res.. Publicado em: 25/11/2019
-
3. Efeitos do Processo de Refusão a Laser na Microestrutura e No Comportamento de Desgaste do Revestimento de WC Aspergido com HVOF
RESUMO O desgaste de componentes e equipamentos industriais e agrícolas representa um grande fator de depreciação de capital e de fonte de despesas com manutenção e reposição de componentes mecânicos. Como o desgaste é um fenômeno essencialmente superficial, envolvendo a remoção mecânica indesejável de material de superfícies, a solução estu
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Oblique penetration of tungsten alloy rod to finite-thickness metal plate
Abstract In order to study the critical ricochet velocity and critical penetration velocity of tungsten alloy rod obliquely penetrating a finite-thickness metal plate, experiment and numerical calculation of tungsten alloy rod impacting on homogeneous armor steel plate with a thickness of 30mm at an angle of 60° were carried out. Compared the experimental a
Lat. Am. j. solids struct.. Publicado em: 04/11/2019
-
5. Resistência à Corrosão de Juntas Dissimilares dos Aços AISI 316L e da Liga Inconel 718
Resumo A soldagem dissimilar (Dissimilar Metal Welds – DMWs), união de dois diferentes materiais metálicos, tem muitas aplicações industriais, com destaque para trocadores de calor nas usinas nucleares. Portanto, devem resistir à corrosão e a esforços mecânicos, entre outros requisitos. Neste trabalho foi abordada a susceptibilidade à corrosão d
Soldag. insp.. Publicado em: 21/10/2019
-
6. Hydrogen Peroxide Electrogeneration by Gas Diffusion Electrode Modified With Tungsten Oxide Nanoparticles for Degradation of Orange II and Sunset Yellow FCF Azo Dyes
In this work, the gas diffusion electrode (GDE) cathode of Vulcan XC72 carbon modified with nanoparticles of WO2.72 (WO2.72 / Vulcan XC72) was used for H2O2 electrogeneration and degradation of 350 mL of Orange II (OII) and Sunset Yellow FCF (SY) azo dyes by electro-Fenton (EF) and photoelectro-Fenton (PEF) processes with different Fe2+ initial content (1.00
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
7. Evaluation of a Metal-Organic Composite (Tungsten-Lignin) for Attenuation of Gamma Radiation
The objective of this work was to use tungsten and lignin as precursors to obtain a metal-organic composite tungsten-lignin (W-Lig) using different sintering temperatures. Tungsten is a refractory metal and it was selected for the composite since it is widely used for high-energy radiation shielding as it has an excellent absorption cross section for thermal
Mat. Res.. Publicado em: 02/09/2019
-
8. Effect of Nitrogen Addition to Shielding Gas on Cooling Rates and in the Microstructure of Thin Sheets of Duplex Stainless Steel Welded by Pulsed Gas Tungsten Arc Welding Process
The effect of the nitrogen content in the shielding gas and its effect on temperature distributions at the welded zone of thin sheets of duplex stainless steel have been evaluated. The duplex stainless steels have many features due to unique microstructural combination of austenite and ferrite grains. The phase balance can be easily shifted depending on the
Mat. Res.. Publicado em: 26/08/2019
-
9. Investigation on the Wear Properties of Ti/TiC/TiN Composite Coatings Prepared by Powder Cored Wires Through TIG Method at Nitrogen Atmosphere on Titanium Substrate
In this present study, Tungsten Inert Gas (TIG) welding and powder filled cored wires with nitrogen shielding gas were utilized to produce TiC and TiN surface composite coatings on the titanium (Ti) sheet substrate. The TIG procedure was done at same welding parameters for all of prepared samples. Phase analysis and microstructures were done by X-ray Diffrac
Mat. Res.. Publicado em: 15/04/2019
-
10. Insights on Structuration of Peroxotungstic Acid in Aqueous Media
Recent studies on tungsten oxide preparation are mainly motivated by its applications in smart windows, energy harvesting and, recently, in cancer therapy. Peroxotungstic acid (PTA) is an important precursor to obtain tungsten oxide in an environmentally-friendly way, through the colloidal synthesis in aqueous media. Despite giving chemically pure products,
J. Braz. Chem. Soc.. Publicado em: 2019-04
-
11. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019
-
12. Nickel-Titanium Alloys Welding of Thin Sheets Using GTAW: Comparative Study Between Similar and Dissimilar Welding with AISI 304 Stainless Steel
The objective of the present work was to evaluate welding of thin sheets (thickness < 1 mm) of similar and dissimilar NiTi alloys with AISI 304 stainless steel using the Gas Tungsten Arc Welding (GTAW) process and to study the mechanical and metallurgical properties of the joints with and without post-welding heat treatment (PWHT). The GTAW process was chose
Mat. Res.. Publicado em: 08/11/2018