Tubular Electrode
Mostrando 1-12 de 12 artigos, teses e dissertações.
-
1. Influence of Pushing and Pulling the Electrode Procedure and Addition of Second Layer of Welding on the Wear in Hardfacing of Fe-Cr-C
The aim of this work is evaluate the influence of welding conditions on abrasive wear resistance in coating of Fe-Cr-C. The metal base used in this investigation was the steel SAE 1020 and as welded metal the selfshilded tubular wires of Fe-Cr-C with 1.6 mm of diameter. The welding parameter such as amperage, voltage, welding speed, wire feed speed and the d
Mat. Res.. Publicado em: 19/09/2016
-
2. Fabricação de sensores eletroquímicos para a determinação de espécies químicas de relevância ambiental / Fabrication of electrochemical sensors for determination of chemical species of environmental relevance
Neste trabalho são apresentados resultados relacionados à determinação de nitrato, nitrito e amônio por técnicas eletroquímicas. Para a determinação de nitrato foi utilizada uma lâmina de cobre cuja superfície é renovada continuamente empregando um processo de ativação (oxidação do cobre e subseqüente redução de íons Cu(II)) com potencial
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/04/2011
-
3. Análise da influência dos parâmetros de operação sobre a geometria do cordão de solda obtido pelo processo de soldagem por eletrodo tubular / Analysis of the influence of welding parameters on the geometry of the weld bead obtained by the process of welding tubular electrode
Este trabalho tem por finalidade a análise dos parâmetros de soldagem do processo com eletrodo tubular com proteção gasosa (FCAW-G – Flux Cored Arc Welding Gas-Shielded) sobre as características geométricas do cordão de solda (largura do cordão, altura do cordão e penetração). As variáveis do processo analisadas foram tensão, velocidade de ali
Publicado em: 2011
-
4. Eletrodeposição de irídio em tubo de grafite como modificador químico permanente em espectrometria de absorção atômica
A tubular electrochemical flow-cell for iridium deposition on the inner surface of pyrolytic graphite tube for permanent chemical modification is proposed. A transversal heated graphite tube was used as working electrode, a cylindrical piece of graphite inserted into the graphite tube as auxiliary electrode, and a micro Ag/AgCl(sat) as reference electrode. I
Química Nova. Publicado em: 2003-12
-
5. Potentiometric determination of L-ascorbic acid in pharmaceutical samples by FIA using a modified tubular electrode
Um sistema de análise por injeção em fluxo usando um eletrodo tubular baseado nas propriedades redox de íons cobre (II) oclusos em membrana de EVA foi desenvolvido para determinação de ácido L-ascórbico. A matriz de polietileno-co-vinil acetato (EVA 40% m/m) foi dopada com íons cobre (II) e dispersa na superfície de um eletrodo tubular de grafite/e
Journal of the Brazilian Chemical Society. Publicado em: 2000-04
-
6. Sistema automático para determinação seqüencial de cianeto livre e total empregando eletrodo tubular íon-seletivo de membrana homogênea
This study presents an automated system for potentiometric determination of free and total cyanide which employs a homogeneous membrane tubular ion-selective electrode. After the electrode is assembled, it is connected to a system composed of 3 three-way solenoid valves, sample line, carrier line, acid stream, and gas diffusion chamber. A Turbo Pascal® comp
Química Nova. Publicado em: 2000-02
-
7. Evaluation of a Fe2O3-based graphite-epoxy tubular electrode as pH sensor in flow injection potentiometry
Uma avaliação sistemática de um eletrodo tubular de Fe2O3 em grafite epóxi foi realizada através de medições de pH em um sistema de injeção em fluxo de linha única. O eletrodo tubular foi obtido pela deposição de uma mistura de óxido de ferro(III), pó de grafite e resina epóxi no interior de um orifício feito previamente no canal de injeção
Journal of the Brazilian Chemical Society. Publicado em: 2000-02
-
8. Metodologias empregando sistemas de analise por injeção em fluxo para determinação de especies quimicas em materiais de revelancia individual
MethodoIogies employing flow injection system were presented for detemination of chemical species in materiaIs of industrial relevante. Initially, a tubular periodate seIective electrode was proposed and used for determination of glycerol in soaps and similar. The methodoIogy refers to the glicerol oxidation by periodate with potentiometric evaluation of thi
Publicado em: 1995
-
9. Factors affecting proximal tubular acidification of non-bicarbonate buffer in the rat.
The effect of peritubular PCO2 and pH changes within the physiological range on proximal tubular acidification of non-bicarbonate (phosphate) buffer was evaluated with and without carbonic anhydrase inhibition by stopped-flow microperfusion and Sb micro-electrode techniques. Luminal steady-state pH was reduced from 6.69 to 6.37 and H ion fluxes (JH+) increas
-
10. Calcium channel inactivation in frog (Rana pipiens and Rana moctezuma) skeletal muscle fibres.
The decay of the Ca2+ current (ICa) during a maintained depolarization was studied in intact twitch skeletal muscle fibres of Rana pipiens and Rana moctezuma with the three-micro-electrode voltage-clamp technique. ICa was recorded at 23 degrees C, after blocking K+ currents, in TEA methanesulphonate saline with 10 mM-Ca2+ made hypertonic by adding 350 mM-suc
-
11. Immobilization of membrane charge in frog skeletal muscle by prolonged depolarization.
1. Inactivation ('immobilization') of the non-linear component of capacitive current in semitendinosus muscles of Rana pipiens was studied using the three-micro-electrode voltage-clamp technique (Adrian, Chandler & Hodgkin, 1970). 2. The steady-state voltage dependence of non-linear charge immobilization was determined by changing the holding potential. The
-
12. Calcium-channel gating in frog skeletal muscle membrane: effect of temperature.
Voltage-clamp experiments using the three micro-electrode method were performed to study the temperature dependence of the calcium current ICa in intact twitch skeletal muscle fibres of the frog. Contraction was blocked by recording in hypertonic sucrose solutions. For depolarizations smaller than 0 mV the decay of the transient, slow, inward current, record