Tubular Bars
Mostrando 1-4 de 4 artigos, teses e dissertações.
-
1. Estudo teórico sobre o dimensionamento e automação do projeto de vigas mistas treliçadas planas, compostas por barras tubulares de aço associadas a uma mesa de concreto armado para pisos / Theoretical study about the design and automation of composite plane trusses projects, composed by tubular steel bars associated to a steel concrete for pavements
A aplicação de estruturas mistas está sendo cada vez mais utilizada para a otimização dos custos da estrutura em obras civis. Uma alternativa para este tipo de estrutura é o composto por uma viga treliçada de perfil metálico e uma mesa de concreto armado conectado à viga metálica através de conectores de cisalhamento. Esta é uma alternativa de ba
Publicado em: 2006
-
2. Theoretical and experimental analysis of space trusses / Análise teórica e experimental de treliças espaciais
This paper presents a study of the behavior of tubular circular section space trusses with the main emphasis placed on the performance of the various truss typologies used in Brazil. Nine space trusses with plan dimensions of 7.5m x 15.0m and one with plan dimensions of 7.5mx7.5m and height of 1.5m were tested. The joint type was varied with the objective to
Publicado em: 2003
-
3. STRUCTURAL BEHAVIOR OF TUBULAR SPATIAL TRUSSES / COMPORTAMIENTO DE EXTRUCTURAS ESPACIALES TUBULARES PADRONIZADAS / COMPORTAMENTO DE ESTRUTURAS ESPACIAIS TUBULARES PADRONIZADAS
This work presents an investigation of the structural behaviour of tubular space trusses composed of continuous end flattened members stacked above each other and joined together by a single bolt. One of the main motivations for this work comes from the fact that this structural solution is very commonly used in Brazil. The main reasons for that are the econ
Publicado em: 1998
-
4. PHOTOELASTIC DETERMINATION OF STRESS INTENSITY FACTORS FOR CRACKS NEAR WELD-JOINTS IN PLANE BARS AND TUBULAR SPECIMENS / FATORES DE INTENSIDADE DE TENSÕES PARA TRINCAS PRÓXIMAS A JUNTAS SOLDADAS PLANAS E TUBULARES VIA FOTOELASTICIDADE
O presente trabalho visa determinar, experimentalmente,Fatores de Intensidade de Tensões, KI e KII em barras e tubos, submetidos à tração, com trincas situadas: I) Junto ao pé do cordão de solda em barras planas soldadas ortogonalmente com relações comprimento de trinca, a, largura da barra, B, a/B igual a 0,1 e a/B igual a 0,2. II) Próximo à raiz
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/03/1987