Transient Faults
Mostrando 1-12 de 12 artigos, teses e dissertações.
-
1. Distributed generators performance during short-circuits considering fault ride-through requirements / Desempenho de geradores distribuídos durante curtos-circuitos considerando requisitos de suportabilidade a afundamentos de tensão = : Distributed generators performance during short-circuits considering fault ride-through requirements
The increase of distributed generation penetration in distribution systems not only helps to diversify the electrical matrix but also brings both technical and economic benefits. Yet, it also raises worries related to energy supply reliability. For wind power plants into the medium and high voltage networks there are the grid codes for "Fault Ride-Through" w
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/08/2012
-
2. CFT-tool : ferramenta configurável para aplicação de técnicas de detecção de falhas em processadores por software / CFT-tool: configurable tool to application of faults detection techniques in processors by software
Este trabalho apresenta uma ferramenta configurável, denominada de CFT-tool, capaz de aplicar automaticamente técnicas de detecção de erros em software com o objetivo de proteger processadores com diferentes arquiteturas e organizações contra falhas transientes no hardware. As técnicas baseadas em redundância e comparação são aplicadas pela CFT-to
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
3. MÉTODOS PARA CORREÇÃO DAS DISTORÇÕES DA FORMA DE ONDA SECUNDÁRIA CAUSADAS PELA SATURAÇÃO DE TRANSFORMADORES DE CORRENTE PARA SERVIÇO DE PROTEÇÃO / METHODS FOR CORRECTION OF SECONDARY WAVEFORM DISTORTIONS CAUSED BY SATURATION OF CURRENT TRANSFORMERS FOR PROTECTIVE RELAYING PURPOSES
This work aims to evaluate the performance of some methods used to detect and correct the distorted portions of the secondary current signal waveform, which occur due to the core saturation of current transformers. Such methods are presented didactically divided among techniques existing in the specialized literature and new methodologies proposed. Involving
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/02/2011
-
4. Transient-fault robust systems exploiting quasi-delay insensitive asynchronous circuits / Sistemas robustos a falhas transientes explorando circuitos assíncronos quase-insensíveis aos atrasos
Os circuitos integrados recentes baseados em tecnologias nanoeletrônicas estão significativamente mais vulneráveis a falhas transientes. Os erros gerados são assim também mais críticos do que eram antes. Esta tese apresenta uma nova virtude em termos de confiabilidade dos circuitos assíncronos quase-insensíveis aos atrasos (QDI): a sua grande habilid
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2010
-
5. Dealing with radiation induced long duration transient faults in future technologies / Lidando com falhas transitórias de longa duração provocadas por radiação em tecnologias futuras
Com a evolução da tecnologia, dispositivos menores e mais rápidos ficam disponíveis para a fabricação de circuitos que, embora sejam mais eficientes, são mais sensíveis aos efeitos da radiação. A alta densidade, ao reduzir a distância entre dispositivos vizinhos, torna possível a ocorrência de múltiplas perturbações como resultado da colisão
Publicado em: 2009
-
6. Gephysical Characterization of the Araguainha impact structure, MT/GO. / Caracterização geofísica da estrutura de impacto de Araguainha, MT/GO
Araguainha is the largest and the best-exposed complex crater of South America, formed in horizontal sediments of the Paraná Basin. Its portentous structure with 40 km in diameter and 25 km of transient cavity reveals a negative contrast of density and magnetic susceptibility in the central uplift. That feature allows to infer a limit of physical property b
Publicado em: 2007
-
7. SISTEMA DE IDENTIFICAÇÃO E LOCALIZAÇÃO DE FALTAS EM LINHAS DE TRANSMISSÃO BASEADO EM REDES NEURAIS / IDENTIFICATION SYSTEM OF FAULTS IN TRANSMISSION LINES BASED ON NEURAL NETWORKS
Quando ocorre algum tipo de falta em uma Linha de Transmissão (LT), sua localização exata é essencial para uma rápida recomposição do Sistema Elétrico. Métodos que utilizam tensão e corrente de apenas um terminal contêm simplificações que podem acarretar erros. Esta dissertação investiga a aplicação de Redes Neurais Artificiais (RNA) na obte
Publicado em: 2002
-
8. Faults detection and isolation using reduced-order state observers / Detecção e localização de falhas via observadores de estado e de ordem reduzida
The development of new faults detection techniques is necessary because of increasing demands from industries on reliability and safety in mechanical systems. They must be supervised such that occurrence of failures can be accommodated as quickly as possible because they can cause an unacceptable deterioration of the systems performance. In this work, we hav
Publicado em: 1998
-
9. TRANSIENT FAULT TOLERANCE BY DISTINCTNESS / TOLERANCIA A FALHAS TRANSIENTES POR DIVERSIFICAÇÃO
This work consideres a geographically localized computerized control sustem. The aim is to determine a policy of tolerance to transient faults, a well as a basic architecture for the control system. A discussion of the allocated effort to implement it is included here. They included the characterization of physical and human faults, masking, detection and re
Publicado em: 1979
-
10. The organization of seismicity on fault networks.
Although models of homogeneous faults develop seismicity that has a Gutenberg-Richter distribution, this is only a transient state that is followed by events that are strongly influenced by the nature of the boundaries. Models with geometrical inhomogeneities of fracture thresholds can limit the sizes of earthquakes but now favor the characteristic earthquak
-
11. Implications of fault constitutive properties for earthquake prediction.
The rate- and state-dependent constitutive formulation for fault slip characterizes an exceptional variety of materials over a wide range of sliding conditions. This formulation provides a unified representation of diverse sliding phenomena including slip weakening over a characteristic sliding distance Dc, apparent fracture energy at a rupture front, time-d
-
12. Geometric incompatibility in a fault system.
Interdependence between geometry of a fault system, its kinematics, and seismicity is investigated. Quantitative measure is introduced for inconsistency between a fixed configuration of faults and the slip rates on each fault. This measure, named geometric incompatibility (G), depicts summarily the instability near the fault junctions: their divergence or co