Transfer Devices
Mostrando 1-12 de 76 artigos, teses e dissertações.
-
1. An Amorphous Silicon Photo TFT with Si3N4/Al2O3 or HfO2 Double Layered Insulator for Digital Imaging Applications
Abstract This paper focuses on amorphous silicon photo thin-film transistors with double layered insulator using Si3N4/Al2O3 or HfO2 as candidates for the succession of Si3N4 as a traditional insulator in the fabrication of hydrogenated amorphous silicon thin-film transistors. Whether for industry or for research, there is a need to investigate the use of th
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2019-03
-
2. Recombination Study of Dye Sensitized Solar Cells with Natural Extracts
Natural dyes can be used in dye sensitized solar cells (DSSCs) to generate low-cost devices, although with low light harvesting because of energy losses from the recombination process. This study investigates recombination reactions in DSSCs with natural dyes extracted from eggplants, plums, and hibiscus flowers. Titanium dioxide films were coated on a fluor
J. Braz. Chem. Soc.. Publicado em: 2019-02
-
3. Advances in enzyme bioelectrochemistry
ABSTRACT Bioelectrochemistry can be defined as a branch of Chemical Science concerned with electron-proton transfer and transport involving biomolecules, as well as electrode reactions of redox enzymes. The bioelectrochemical reactions and system have direct impact in biotechnological development, in medical devices designing, in the behavior of DNA-protein
An. Acad. Bras. Ciênc.. Publicado em: 2018
-
4. Efficient medical image access in diagnostic environments with limited resources
Abstract Introduction A medical application running outside the workstation environment has to deal with several constraints, such as reduced available memory and low network bandwidth. The aim of this paper is to present an approach to optimize the data flow for fast image transfer and visualization on mobile devices and remote stationary devices. Methods
Res. Biomed. Eng.. Publicado em: 12/01/2017
-
5. MATHEMATICAL MODELING OF THE ELECTRIC CURRENT GENERATION IN A MICROBIAL FUEL CELL INOCULATED WITH MARINE SEDIMENT
Abstract Microbial fuel cells (MFC) are electrochemical devices that utilize the ability of some microorganisms to oxidize organic matter and transfer electrons resulting from their metabolism to an insoluble acceptor. The goal of the present study was to model the kinetics of electrical current generation from an MFC inoculated with marine sediment. For thi
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
6. CÉLULAS SOLARES SENSIBILIZADAS POR CORANTES NATURAIS: UM EXPERIMENTO INTRODUTÓRIO SOBRE ENERGIA RENOVÁVEL PARA ALUNOS DE GRADUAÇÃO
An interesting practical experiment about the preparation of dye–sensitized solar cells (DSSC) using natural dyes were carried out by the undergraduate students in the chemistry course at UNICAMP . Natural dyes were extracted from blueberries (Vaccinium myrtillus L.), jabuticabas (Myrciaria cauliflora), raw and cooked beets (Beta vulgaris L.), and annattos
Quím. Nova. Publicado em: 2015-12
-
7. CuO Nanofibers Immobilized on Paraffin-Impregnated Graphite Electrode and its Application in the Amperometric Detection of Glucose
1-D nanostructures are promising materials for development of electrochemical devices offering benefits such as fast electron transfer rates and large surface areas. Copper oxide nanofibers (CuO-NFs) synthesized by electrospinning technique and subsequent thermal treatment, were used to modify paraffin-impregnated graphite electrode (PIGE) for a sensitive
J. Braz. Chem. Soc.. Publicado em: 2015-08
-
8. DEVELOPMENT OF INSULATING MAGNETIC OIL FOR TRANSFORMERS
The Centrais Elétricas do Norte do Brasil AS – Eletronorte, as well as other companies in the world energy sector, have problems of loss of the performance by excessive heat and even accidents with their transformers. The maintenance and accidents impact of energy supply, generating profit and more expensive insurance premiums. The transformers are essent
Publicado em: 20/07/2014
-
9. A novel technology for minimizing the synthesis time of nanostructured powders in planetary mills
A key objective in processing of nanostructured powders via high energy ball milling is to minimize the synthesis time. This paper presents the application of imperialist competitive algorithm (ICA) for optimization of milling parameters in order to minimize the synthesis time of nanostructured powders in planetary mills. At first a direct relationship betwe
Mat. Res.. Publicado em: 11/03/2014
-
10. Máscaras mecânicas de sombra por eletrocorrosão para dispositivos eletro-ópticos
Shadow masks are used in manufacturing processes for electro-optic devices to transfer patterns with different shapes and dimensions. For fabrication of organic based devices, shadow masks should be made of materials stable against organic solvents, high temperature, and robust, remaining unchanged after multiple cycles of use and fixation. Thus, stainless s
Quím. Nova. Publicado em: 2014
-
11. La reconfiguración del campo asistencial: el caso del plan de equidad de Uruguay
The recent and increasing consolidation of the Programs for Conditioned Income Transfer (Programas de Transferencia de Renta Condicionada - PTRC) as the main instrument to fight poverty in Latin America is the starting point of the following thinking. Their implementation implies a restructuring of assistance policies, launching or modifying technical and in
Serv. Soc. Soc.. Publicado em: 2013-12
-
12. Filtros digitais por transformadas de Fourier aplicados em eletroquímica
The electrochemical properties of micro and nano-electrodes are widely investigated due to their low faradaic and capacitive currents, leading to a new generation of smart and implantable devices. However, the current signals obtained in low-dimensional devices are strongly influenced by noise sources. In this paper, we show the evaluation of filters based o
Quím. Nova. Publicado em: 2013