Titanium
Mostrando 13-24 de 940 artigos, teses e dissertações.
-
13. Influence of Bisphosphonates on the Behavior of Osteoblasts Seeded Onto Titanium Discs
Resumo Entre outros fatores, os tipos de bisfosfonatos bem como os regimes de tratamento parecem estar diretamente associados com o sucesso ou falhas na instalação de implantes osseointegrados. Este estudo avaliou a influência de dois bisfosfonatos, o alendronato de sódio (AS) e o ácido zoledrônico (AZ), no metabolismo de osteoblastos. Osteoblastos hum
Braz. Dent. J.. Publicado em: 2020-06
-
14. Effect of titanium and nitrogen inoculation on the microstructure, mechanical properties and abrasive wear resistance of Hadfield Steels
Abstract The effect of titanium and nitrogen addition on Hadfield steels was investigated. In order to do this, two grades of steels were produced in terms of titanium and nitrogen addition. The final samples had their microstructure characterized and their mechanical properties were evaluated by uniaxial tensile and Charpy impact tests. Furthermore, the wea
REM, Int. Eng. J.. Publicado em: 2020-03
-
15. ELECTROCHEMICAL INCINERATION OF SHORT-CHAIN CARBOXYLIC ACIDS WITH NB‑SUPPORTED BORON DOPED DIAMOND ANODE: SUPPORTING ELECTROLYTE EFFECT INTO THE ELECTROGENERATED OXIDANT SPECIES (HYDROXYL RADICALS, HYDROGEN PEROXIDE AND PERSULFATE)
This work describes the electrochemical oxidation study of three short chain carboxylic acids (acetic, oxalic and formic 0.18 mol L-1) using different electrolysis conditions (electrolyte composition and current density) in an electrochemical reactor fitted with niobiumsupported/BDD electrode (Nb/BBD) as anode and titanium plate as cathode. The experiments w
Quím. Nova. Publicado em: 2020-03
-
16. Effect of Plasma Arc Welding on Residual Stress and Distortion of Thin Titanium Sheet
In this research work, a finite element model is developed to predict the temperature field and residual stress during plasma arc welding of thin Ti-6Al-4V sheets. Dhinakaran’s heat source model which is based on Parabolic Gaussian distribution is used to predict the temperature field and Anand’s model is used to predict the residual stress. Numerical si
Mat. Res.. Publicado em: 20/01/2020
-
17. Effect of Suture on Mechanical Properties of Stitched Thermal Protection Sandwich
This paper investigates the tensile properties and bending performances of stitched thermal protection structure in engineering, and the effect of stitching density on mechanical properties, via a model of ceramic-aerogel stitched sandwich. With the help of ANSYS, titanium alloy bottom plate was added to the bottom surface of the thermal protection structure
Mat. Res.. Publicado em: 13/01/2020
-
18. Solvothermal Synthesis of Cerium-Doped Titania Nanostructured Materials Modified with Acetylacetone for Solar-Driven Photocatalysis
This study reports the preparation of nanostructured cerium-doped titanium dioxide photocatalysts containing different cerium concentrations by a modified sol-gel route involving the use of acetylacetone. The nanocrystalline powders had their structural, morphological, and optical properties characterized by X-ray diffraction, vibrational and Raman spectrosc
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
19. Effect of Scanning Speed on the Surface Roughness of Laser Metal Deposited Copper on Titanium Alloy
This paper reports on the effect of scanning speed on the laser deposited Cu on titanium alloy substrate. The experiments were conducted by varying the scanning speed from 0.3 m/min to 1.2 m/min while the laser power, the powder feed rate and the gas flow rate were kept constant. The laser deposited Cu were characterized through the evolving microstructure a
Mat. Res.. Publicado em: 20/12/2019
-
20. Efeitos da Espessura da Fita Metálica no Metal de Solda Utilizando Cavacos de Titânio Como Componentes do Fluxo em Arames Tubulares para a Formação de TiC
Resumo Cavacos de titânio foram utilizados como componentes do fluxo em arames tubulares fabricados a partir da conformação e trefilação de fitas metálicas com espessuras diferentes. Os arames apresentaram diâmetros internos com dimensões diferentes afetando as taxas de preenchimento do fluxo. Para as mesmas condições de soldagem, os arames fabric
Soldag. insp.. Publicado em: 02/12/2019
-
21. Avaliação do efeito de cepas probióticas em biofilme de S. aureus sobre discos de titânio com superfície tratada
Resumo Introdução As doenças peri-implantares apresentam como um dos principais fatores etiológicos o biofilme bacteriano, geralmente formado por uma microbiota semelhante à das doenças periodontais. Seu tratamento está centrado na descontaminação da superfície do implante e na remoção mecânica do biofilme, podendo ainda estar associado à admi
Rev. odontol. UNESP. Publicado em: 02/12/2019
-
22. Effect of DLC Films with and without Silver Nanoparticles Deposited On Titanium Alloy
Resumo O filme de carbono semelhante a diamante (DLC) é um material de revestimento duro e biocompatível que pode impedir a corrosão com liberação de íons metálicos. Este estudo avaliou as características estruturais do filme de DLC, com e sem nanopartículas de prata (Ag), depositadas por plasma (PECVD) em liga de titânio (Ti-6Al-4V) e formação �
Braz. Dent. J.. Publicado em: 28/11/2019
-
23. Influence of a Retentive Shoulder Design to Prevent Early Failure of Three Core Build-Ups
Resumo Este estudo avaliou a influência de um preparo retentivo em forma de ombro para prevenir a falha precoce de núcleos de preenchimento realizados em molares com 3 diferentes tipos de resina composta. Noventa e seis terceiros molares superiores hígidos extraídos de humanos, foram divididos em dois grupos (n=48) de acordo com o tipo de redução oclus
Braz. Dent. J.. Publicado em: 28/11/2019
-
24. Titanium dioxide (TiO2) as a marker to estimate fecal output in sheep
RESUMO: O dióxido de titânio (TiO2) é um marcador externo utilizado para estimativas da excreção fecal, visando medidas de consumo de forragem em ruminantes a pasto. No entanto, o uso deste marcador para ovinos em pastejo ainda pode ser melhor explorado. Neste trabalho, o TiO2 foi testado para estimar a produção fecal de ovinos ingerindo azevém anual
Cienc. Rural. Publicado em: 25/11/2019