Titanium Surface
Mostrando 1-12 de 256 artigos, teses e dissertações.
-
1. Characterization and mechanical properties of one-part geopolymer based on a pure metakaolin
Abstract Geopolymers are amorphous silicate polymers that have been extensively studied due to their applications, scientific and technical relevance, and their potential as cement in substitution to Portland. Much of the focus has been in the use of precursors and aggregates that are rarely pure and homogeneous with the use of tailings being very common. Th
REM - International Engineering Journal. Publicado em: 2022
-
2. Enhancement of Visible Light-Responsive Photocatalytic Efficiency by Using a Laccaic Acid-Modified Titanium Dioxide Photocatalyst
In this study, a laccaic acid-modified TiO2 photocatalyst (Lac-TiO2) was prepared via an impregnation method with 0.50, 1.00, 2.50, and 5.00 wt.% laccaic acid. The products’ physical properties were examined through X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoemission spectroscopy (XPS), UV-Vis diffused
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Emerging titanium surface modifications: The war against polymicrobial infections on dental implants
Resumo Implantes dentários em titânio (Ti) são reconhecidos como principal modalidade terapêutica para a reabilitação oral de pacientes edêntulos, demonstrando uma alta taxa de sucesso e longevidade clínica. No entanto, após inserção no ambiente bucal, os implantes dentários agem como substrato para adesão e acúmulo microbiano. A formação de
Brazilian Dental Journal. Publicado em: 2022
-
4. Effect of Suture on Mechanical Properties of Stitched Thermal Protection Sandwich
This paper investigates the tensile properties and bending performances of stitched thermal protection structure in engineering, and the effect of stitching density on mechanical properties, via a model of ceramic-aerogel stitched sandwich. With the help of ANSYS, titanium alloy bottom plate was added to the bottom surface of the thermal protection structure
Mat. Res.. Publicado em: 13/01/2020
-
5. Solvothermal Synthesis of Cerium-Doped Titania Nanostructured Materials Modified with Acetylacetone for Solar-Driven Photocatalysis
This study reports the preparation of nanostructured cerium-doped titanium dioxide photocatalysts containing different cerium concentrations by a modified sol-gel route involving the use of acetylacetone. The nanocrystalline powders had their structural, morphological, and optical properties characterized by X-ray diffraction, vibrational and Raman spectrosc
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
6. Effect of Scanning Speed on the Surface Roughness of Laser Metal Deposited Copper on Titanium Alloy
This paper reports on the effect of scanning speed on the laser deposited Cu on titanium alloy substrate. The experiments were conducted by varying the scanning speed from 0.3 m/min to 1.2 m/min while the laser power, the powder feed rate and the gas flow rate were kept constant. The laser deposited Cu were characterized through the evolving microstructure a
Mat. Res.. Publicado em: 20/12/2019
-
7. Avaliação do efeito de cepas probióticas em biofilme de S. aureus sobre discos de titânio com superfície tratada
Resumo Introdução As doenças peri-implantares apresentam como um dos principais fatores etiológicos o biofilme bacteriano, geralmente formado por uma microbiota semelhante à das doenças periodontais. Seu tratamento está centrado na descontaminação da superfície do implante e na remoção mecânica do biofilme, podendo ainda estar associado à admi
Rev. odontol. UNESP. Publicado em: 02/12/2019
-
8. Effect of DLC Films with and without Silver Nanoparticles Deposited On Titanium Alloy
Resumo O filme de carbono semelhante a diamante (DLC) é um material de revestimento duro e biocompatível que pode impedir a corrosão com liberação de íons metálicos. Este estudo avaliou as características estruturais do filme de DLC, com e sem nanopartículas de prata (Ag), depositadas por plasma (PECVD) em liga de titânio (Ti-6Al-4V) e formação �
Braz. Dent. J.. Publicado em: 28/11/2019
-
9. Influence of a Retentive Shoulder Design to Prevent Early Failure of Three Core Build-Ups
Resumo Este estudo avaliou a influência de um preparo retentivo em forma de ombro para prevenir a falha precoce de núcleos de preenchimento realizados em molares com 3 diferentes tipos de resina composta. Noventa e seis terceiros molares superiores hígidos extraídos de humanos, foram divididos em dois grupos (n=48) de acordo com o tipo de redução oclus
Braz. Dent. J.. Publicado em: 28/11/2019
-
10. Morphological and Structural Variations in Anodic Films grown on Polished and Electropolished Titanium Substrates
The objective of this work was to investigate the effects of anodization parameters on the anatase phase formation of titanium oxide films, which have been grown on both electropolished and non-electropolished titanium surfaces by direct current anodization in 0.25 and 2.5 mol L-1 H3PO4 solutions, respectively, at three anodization times (3, 6 and 12 hours).
Mat. Res.. Publicado em: 11/11/2019
-
11. Kaolinite/TiO2/cobalt(II) Tetracarboxymetallophthalocyanine Nanocomposites as Heterogeneous Photocatalysts for Decomposition of Organic Pollutants Trimethoprim, Caffeine and Prometryn
São Simão’s Brazilian kaolinite has been treated with titanium(IV) isopropoxide and cobalt(II) tetracarboxymetallophthalocyanine under different conditions (acidic or basic), leading, after drying at 100 ºC, to new titania-doped cobalt(II)-metallophthalocyanine/kaolinite solids. These solids were characterized by chemical analysis, powder X-ray diffract
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
12. Degradation of Acid Red 8 Dye Using Photo-Fenton Reaction Mediated by Titanium Modified Catalysts
Catalysts prepared by co-precipitation of iron and titanium were evaluated in heterogeneous photo-Fenton degradation of the azo dye Acid Red 8 under blacklight irradiation. Materials with different titanium contents (0 < Ti/Fe < 0.6) were characterized using X-ray diffractometry, scanning electron microscopy, X-ray fluorescence spectroscopy, specific surface
J. Braz. Chem. Soc.. Publicado em: 21/10/2019